Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

What is the correct part name for the part that the front brake calipers bolt to on a 1994 olds cutlass ciera s V-6?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

Just what it is. Brake caliper mounting bracket, or caliper bracket. just depends what parts company you are talking to..

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Olds Cutlass Ciera starter issues


You should have two or three wires that go to the large post on the solenoid, including the 4 gauge wire from the battery. Then one 16 gauge wire to the small post. That wire comes from the key switch.
Let me know if you need colors for wires.

Mar 01, 2013 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do I change the starter on a 1994 oldsmobile Cutlass Ciera


Since its right there at the front of the motor, you really only need a simple ratchet and appropriate sized socket or box wrench to get it loose, but you want to make sure that you label the wires as to remember which terminals they go on;if not reattached correctly, there will be electrical problems with gauges and overall car operations...

Jun 23, 2012 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


REMOVE THE STARTER FLY WHEEL COVER. STARTER BOLTS IS VERTICAL BOLTED INTO THE ENGINE.

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

2 Answers

My front disc brakes vibrate very bad when braking, also extreme heat on rotor area. rotors do not look warped and caliper piston goes in and out (no signs of leakage) i think the problem is on drivers...


If you are feeling a pulsing in the bake peddle the rotors are to blame they maybe warped or may have some forin matter behind them try taking them off and cleaning the mounting surface. You may not be able to tell if they are warped as it does not take much run out to case a vibration. As far as the heat it is normal for rotors to get up to 1000 degrees during braking so unless you are seeing blue spots of them or they are turning red i would not worry about it. with the bake pad problem replace the pads and lubricate the slides (they sell specific lubricant for this at the parts store use it!) if that does not fix it the caliber will have to be replaced as the bore for the piston is worn.

Nov 25, 2010 | 1995 Oldsmobile Cutlass Ciera

2 Answers

Where are the starter bolts located? 1994 Olds Ciera S w/v6


Should be between the radiator and engine, underneath the car. There might be a plastic cover held on with 10mm bolts. The starter bolts go up thru the starter, into the block.

May 06, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Replace front wheel bearing. How? 95 Oldsmobile Cutlass ciera


remove front tire ,brake caliper ,rotor and axle nut its gona be a hub bearing it has 3 bolts holding it

Apr 02, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

How do i change the front brakes on a 1991 oldsmobile cutlass ciera. i already have the brake paids


Hello, open the hood locate your brake fluid take the top off, than you want to losen the lug nuts one the wheel enough so they turn by hand. Jack up the car high enough to get a jack stand under it and the wheel is off the ground. Once the car is supported securely remove the lug nuts and wheel. Once the wheel is removed remove the screw on the bottom of the brake caliper, remove the old pads. Rotate the caliper upward, using a C-clamp and a old brake pad push the piston back in the caliper. Position the old brake pad to cover the piston and the C-clamp in the center of the old brake pad and slowly turn till the piston is fully retracted in the caliper. Install the new pads, put the caliper back in position, put the caliper screw back in double check work. Once every thing looks ok put the wheel back on, only hand tighten the lug nuts, make sure the wheel is tighten evenly. Remove jack stand, lower the car tighten the lug nuts using a crossing pattern once that is done pump the brakes, till they get firm, after they get firm start the car pump the brakes a few more times. The fun part take it for a test ride but allow your self more than normal distance to stop.

Feb 14, 2010 | 1991 Oldsmobile Cutlass Ciera

1 Answer

Just put new brake caliper on front driver side


Gravity bleed caliper, just open valve and have a coffee break and close it. Did you buy a loaded caliper with new pads on it? Check the rear wheel cylinders they may be the cause of your mushy pedal. They are cheap too.

Jun 09, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

94 olds cutlass ciera headlight lens


First you have to remove the corner turn signal and grill. Both should be held on with just some hex screws (3 in signal, about 6 in grill). Then you should see 4 black bolts. Unscrew those and the assembly comes right off. : )

Oct 27, 2008 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...