Question about 2006 Pontiac G6

1 Answer

Where do i take the cover off for the horn to fix it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 175 Answers

You have to remove the driver's side headlight assembly for access to the actual horn.

Posted on Feb 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the horn relay from a 1995 buick lesabre


I believe it is the fourth relay from the left passenger side in the engine compartment against the firewall. I am assuming your horn intermittently goes off by itself. It's a interior heat related issue. The horn pad cover on the steering wheel has a membrane layer. It's basically a switch that has one wire that goes to the horn relay to activate the horn. The Buick GM logo embossed on this plastic cover is where I found it most sensitive to any light touch. Unhook the battery. If you carefully cut the right edge of the the steering wheel horn pad and carefully pry it out a little, it will fix this issue and still be able to use the horn. It's another GM defect. I hope this helps! Let me know.

Mar 04, 2015 | 1995 Buick LeSabre

Tip

Drivers airbag removal / horn switch removal 1998 dodge neon


I have a 98 dodge neon and the horn was stuck on all the time. I could not find anyone who could tell me how to remove the cover on the airbag so I could get to the horn touchpad. this is what i did.
first unhook the battery.
remove the 2 screws on the cruise control buttons on each side of the steering wheel.
remove the bolt(s) from both sides of the airbag bracket
unplug the horn wire
unplug the airbag wire CAREFULLY (it's the one in the center).( I left this hooked up)
I did not need to completely remove the air bag from my car, because my horn was stuck on and I just needed to remove the cover.
after I removed the airbag assembly I removed all the screws holding the cover on I removed the inner touch pad so I could fix it.
I reversed the steps to put it back together.. the horn works as it should.

on Jul 26, 2015 | 1998 Dodge Neon

1 Answer

What would cause the horn on a 2005 lexus SC430 to stop working & is it easy to fix yourself or would it be cover under warranty?


If you have a warranty that covers electrical problems of course it is covered. The horn is hard to reach and requires the car be raised off the ground.

Sep 04, 2012 | 2005 Lexus SC430

1 Answer

How do you remove the horn cover. The air bag is not there anymore. The horn will not stop sounding so I have removed the fuse until I can fix the horn. I do not want to be without a horn,


pull the cover off you will see a big nut take that nut off now you need a steering wheel puller you that you can rent from auto-zone for a few bucks once the steering wheel is off you can see what the problem is hope this helps bob

Apr 30, 2011 | 1999 Dodge Stratus

3 Answers

Horn honks by itself


This is a common problem with GM vehicles in that year range. The horn switch (buttons) in the steering wheel pad get stuck closed. The switches are embedded in the air bag assembly and would be difficult to replace. A temporary fix to stop the horn is to remove fuse #3 in the relay center which is located in the bottom of the dash on the passenger side, the plastic cover has to be removed for access. DO NOT only disconnect the wires from the horns as the relay switch that controls the circuit will remain powered constantly and will kill your battery. To restore horn function there are aftermarket horn button kits available at most auto parts stores.

If this info is helpful please give me a favorable rating.

Jan 13, 2011 | 1995 Buick LeSabre

2 Answers

Need to replace horn cover.


the horn cover is part of the airbag module.

Oct 08, 2009 | 2007 Hyundai Tiburon

3 Answers

Where is the horn located on A 2004 Pontiac Grand


underneath the facia of the car, jack the car and look undernath the bumper cover.

Jul 09, 2009 | 2005 Pontiac Grand Am

3 Answers

The horn on my hyundai accent doesn't work how do i fix it


Yes prb the fuse. Look under the drivers side by the break in the car. It may have a cover over it. They usally have a diagram of what fuse is what. Also under the hood is a bank of fuses. It will be towards the front on either the left or right side under a black cover.

May 04, 2009 | 2002 Hyundai Accent

1 Answer

Horn


since heat caused the problem, i used cold for the fix.....there are several types of canned "FREEZE" that are used for electronic testing...i sprayed the steering wheel--twice. i think it released the weight of the steering wheel cover on the horn contacts...that or my prayers were answered......whatever the fix----currently AIN'T BROKE.....

Aug 04, 2008 | 1997 Buick LeSabre

6 Answers

1995 Buick LeSabre - horn blows


My horn would honk without any assistance from me. The reason was because the plastic cover for the air bag and horn switches had shrunk so tight that it pressed on the horn switches. If your problem is intermittent then cold temperature would also cause the cover to shrink. This is how I solved the problem on my 1995 Buick LeSabre:
Disconnect the negative battery cable.
  1. Under the hood I found a long black plastic cover with the words, “Maxi-Fuse/Relay Center”
2. 2. There are two plastic twist locks (turn ¼ left) and one small wing nut holding the cover on. When the cover is off I see two black fuse covers side by side and below them are several relays. Some are gray and some are black.
3. My horn relay was the second from the left as I faced the rear of my car. It was gray. Some may be black.
4. A small green retainer tab had to be pushed out before I could pull the relay out. On the back of the relay were two orange wires that supply 12V. One green wire that goes to the horns and one black wire for ground that goes to the horn switch under the air bag.
5. I cut the black wire and wired in a spst push button switch that I connected to ground.
6. I mounted the push button switch near the driver’s door on a flat part of the dash. I used very strong double sided tape to secure the button switch to the dash.

My horns now are activated when I push my new horn switch button. My problem solved.

Someone recommended removing the air bag/horn switch unit from the steering wheel and relieving the tightness of the plastic cover. There are probably more than one way to this.

Jul 02, 2008 | 1995 Buick LeSabre

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...