Question about 2002 GMC Yukon Denali

1 Answer

Ticking in v8 6.0 gmc. changed plugs and wores now it ticks?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Sound like maybe you didn't get one of the wires pushed all the way oneto the plug and the spark is jumping to ground

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tick in my GMC 5.3 engine


Take out spark plugs and spray carburetor fluid in holes and dry if that don't work tak off valve covers and check rocker arms

Apr 03, 2015 | GMC Cars & Trucks

1 Answer

Engine ticking on startup in 1998 gmc pickup


low on oil the first time now the valve lifters are worn

Apr 13, 2013 | 1998 GMC Sierra

1 Answer

Hey i have a 01 gmc jimmy and i hear a ticking nois when i take off but i looked under the hood and its not comeing from the moter cud anyone tell me what it cud be?


it should be taken to identify - stetoskoobiga listening.
This may be the ticking of the fuel system or the ticking of the crankshaft. So it is very difficult to explain.

Mar 17, 2011 | 2001 GMC Jimmy

1 Answer

Shakes and misses while accelerating , has a tick to the engine , i already replaced the spark plugs and wires, 1 new coil pack, air filter, fuel filter , new rear rocker arm and push rod. and oil change


Sounds like you still have a problem where the ticking is coming from. You may have to run a compression test on that cylinder you put the rocker arm on, are that side of the motor that is ticking. Could be the cam lobe wore down and need a camshaft.

Mar 09, 2011 | 1995 Chevrolet Lumina

1 Answer

99 GMC Suburban -- While driving engine cut


Does it tick then a bit later tick again? If so that's most likely an automatic circuit breaker that you hear. If you have a short in the wiring the circuit breaker kicks out (tick) and shuts that circuit down, after a minute or so the circuit breaker cools enough to reset itself (tick again). That would explain the truck shuting down. The circuit breaker will continue to reset itself until the battery goes dead, I would suggest disconnecting the battery until you can get it to a shop. You have a short in the wiring somewhere. Good Luck!

Jan 02, 2010 | 1999 GMC Suburban

1 Answer

I have a 1998 GMC k1500 and it makes a ticking noise eveytime u step on the gas?


WORN PISTON RINGS MAKE A TICKING NOISE.VALVE LIFTERS MAKE TICKING NOISE.WORN DISTRIBUTOR SHAFT BUSHINGS MAKE A TICKING LIKE NOISE.

Oct 29, 2009 | 1998 Chevrolet K1500

1 Answer

Ticking sound


Gm will tell you this is normal lifter noise if it from the top of the motor. It could be from the exhaust but you would hear it from under the car more. I do not care for the responce from GM but they say it is ok.

Mar 01, 2009 | 2003 GMC Envoy Xl

2 Answers

1994 mx3 1.6L DOHC ticking at the top of the engine. could the cam's be wore out or an oil gallery plugged. nay suggetions.


had the same problem and my oil level was low..... filled it up and havent had a problem since....

Sep 27, 2008 | 1992 Mazda MX-3

Not finding what you are looking for?
2002 GMC Yukon Denali Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...