Question about 2002 Chrysler Town & Country

1 Answer

Automatic side door will no longer open with remote or console button in car. Also, both side door's locks will not pop up using all of our 3 remotes (1 door is automatic, 1 is manual). Lastly, the back hatch does not lock/engage properly, nor lift up with remote or inside console anymore.... Don't believe it's the remotes...batteries have been replace....remote still locks/unlocks front doors, but not side doors or back hatch. We must now use the key to open the back hatch.... Thanks for you help! JH

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,033 Answers

Did these doors quit at the same time or over a period. It seems that the actuators for the locks have gone bad. With the mentioned doors, that's a lot weight for the actuators to unlock and pop open. With the remotes and console not working , that's more reason to think the actuators are the problem.

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 VW Passat XLS. I tried to lock the doors with the remote and it did not work. I tried to manually lock the car by inserting the key in the door and it will not work. While inside the car I...


This is a wild guess, but it sounds like the switch that controls the door is constantly trying to open the door. It could be the door switch. Try locking the door with the door switch and then hold the lock slightly down to see if it is a mechanical failure in the switch. If not, the remote system may be sending the unlock. You could always pull the fuse for the automatic locks and see if the key will lock/unlock without problem. But then you'd never have remote entry.

Sep 29, 2013 | Volkswagen Passat Cars & Trucks

1 Answer

All my remotes won't unlock passenger doors, why?


this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.

Apr 27, 2012 | Cars & Trucks

1 Answer

Remote auto start will not start a 2007 chevy suburban ltz


If the keyless remote works to unlock and lock the doors, then it should start the engine. In order to use this feature, you have to lock the doors (make sure that all door lock by pushing the lock button twice) with the remote by pushing the lock button, then you hold down the start button on the remote for 2 to 3 seconds and it should start. You can start and stop the engine with the remote 2 or 3 times with the remote, after that it will no longer let you use the remote start until you physically get in the car and start the engine to reset the system. Check your driver information center options using the steering wheel controls. There is an option to enable and disable the remote start option.

May 10, 2010 | Cars & Trucks

1 Answer

Driver side door lock won't open or lock using remote.


if it moves even a little bit when the button is pushed it wont be a fuse issue, you more than likely have a weak door lock actuator

Nov 25, 2009 | Cars & Trucks

1 Answer

I own a 98 Porsche Boxter went out of town for 3 weeks came back and now my battery is dead and my key with remote will not open or close my doors obviously cuz battery is dead. i did manulaly insert key...


now all you need to do is use the key to lock the doors manually and then remove it, after that use the remote to lock and open it like before.

hope it works

rate this

Oct 29, 2009 | 2000 Porsche Boxster

1 Answer

Central Locking does not work


You must reset your remote control in order for the lock/unlock to work properly.

To reset remote you would:
1)Insert Key in Ignition Turn to Position 1(Don't Start the Engine) for about 5 seconds
2)Turn Key Off and HOLD the LOCK button on Remote while pressing the UNLOCK 3 TIMES
3)Release both lock and unlock buttons you are holding
4)All doors should automatically unlock

And exit the door and lock with the Remote.

Sep 19, 2009 | 2000 BMW 3 Series

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...