Question about 1988 Ford F 250

1 Answer

1988 f-250 (460 7.5 liter gas) timing chain cover gsk,do you need to remove oil pan?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

No, you can loosen a view of the oil pan bolts towards the front of the oil pan and drop it down a bit to get clearance to remove the timing cover.

Posted on May 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1987 chevorlete nova 1.6 liters it has a small oil leak I have to put oil in it ever now it's seem like it's coming from the front left side


is the 1.6 liter a six cylinder or slant 6 cylinder by any chance. if not. look for fuel pump location, is this where the oil dripping. or cover that has bolts that have a cover there, if so the gaskets for the cover or the fuel pump gasket needs replacing., try crawling down there when the car is running and see if it linking from the oil pan toward the front cover of oil pan. look where the timing chain location it on the front of motor, and the fan maybe blowing the oil over there. or it could be the vavle cover top cover where the lifters are located, the oil can be linking from there and running down the motor, you will idea the bad gasket remove the bolts, clean off oil, old gasket material, new gasket sealant and gasket sets, bolts down, lets setup few hours, refill oil levels, and everything should be okay.

for more help
www.ask.com/
www.wikipedia.org/
www.infolinks.com/
www.info.com/
www.about.com/mfg.name/make/model/year/
/gasket/replacement/instructions/
/head/gasket/
/vavle/cover/gasket/
/timing/chain/cover/
/fuel/pump/gasket/
/side_panel/cover/gasket/
/oil/pan/gasket/
/type/of/gasket/sealant/

and

www.youtube.com/how/to/fix/gasket/problems/for/?????????????/

Oct 16, 2015 | Cars & Trucks

1 Answer

Replacing Oil pump in Ford Expedition


the oil pump is on the crank behind the balancer and timing chain cover:


REMOVAL

1. Remove the timing chain.
2. Remove the oil pan.
3. Remove the three (A) oil pump screen and cover bolts and the (B) oil pump screen and cover.
4. Remove the two oil pump bolts and the oil pump.

INSTALLATION

1. Clean and inspect the mating surfaces.
2. Install the oil pump and loosely install the two oil pump bolts.
3. Install the oil pump screen and cover and install the three oil pump screen and cover bolts.
4. Install the timing chains.
5. Install the oil pan.

Apr 25, 2012 | 2003 Ford Expedition

1 Answer

Where is the oil pump on 01 ford explorer sport trac and how hard is it to replace it


OIL PUMP IN THE OIL PAN.YOU HAVE TO REMOVE OIL PAN TO REPLACE OIL PUMP.IF YOU HAVE 4.6L ENGINE YOU HAVE TO REMOVE FRONT TIMING CHAIN COVER AND TIMING CHAIN.REMOVE OIL PAN.REMOVE THREE BOLTS AND THE OIL PUMP SCREEN COVER TUBE AND REMOVE OIL PUMP.YOU NEED TO SUBMERGE NEW OIL PUMP IN CLEAN ENGINE OIL TO PRIME IT.

Jul 21, 2011 | 2001 Ford Explorer Sport Trac

1 Answer

How long and easy is it to rebuild oil pump on 94 grand caravan 3.8l


Don't bother. Replace the unit.
3.0 liter
The oil pump assembly used on this engine is mounted at the front of the crankshaft. The oil pump also retains the crankshaft front oil seal.
  1. Remove the accessory drive belts.
  2. Remove the timing belt cover and timing belt. Refer to the timing belt removal and installation procedures in this section.
  3. Remove the crankshaft sprocket.
  4. Remove the oil pump mounting bolts (5), and remove oil pump assembly. Mark mounting bolts for proper installation during reassembly.

To install:
  1. Clean the oil pump and engine block gasket surfaces thoroughly.
  2. Position a new gasket on pump assembly and install on cylinder block. Make sure correct length bolts are in proper locations and tighten all bolts to 10 ft. lbs. (14 Nm).
  3. Install the crankshaft sprocket and timing belt. Recheck engine timing marks.
  4. Install the timing belt covers. For more details, refer to the timing belt cover installation procedures.
  5. Install the accessory drive belts.
  6. Refill the crankcase and start the engine.
  7. Check for correct engine oil pressure and for any oil leakage.
3.3 and 3.8 liter engines


  1. Disconnect the negative battery cable. Remove the dipstick.
  2. Raise the vehicle and support safely. Drain the oil and remove the oil pan.
  3. Remove the oil pickup.
  4. Remove the chain case cover.
  5. Disassemble the oil pump as required.

To install:
  1. Assemble the pump. Tighten the cover screws to 10 ft. lbs. (14 Nm).
  2. Prime the oil pump by filling the rotor cavity with fresh oil and turning the rotors until oil comes out the pressure port. Repeat a few times until no air bubbles are present.
  3. Install the chain case cover.
  4. Clean out the oil pickup or replace as required. Replace the oil pickup O-ring and install the pickup to the pump.
  5. Install the oil pan.
  6. Install the dipstick. Fill the engine with the proper amount of oil.
  7. Connect the negative battery cable and check the oil pressure. Check for any oil leaks.
for the 3.3 you can rebuild, 3.0 - replace.

Feb 15, 2011 | 1994 Dodge Caravan

2 Answers

How do you replace a gasket and cover for timing chain and rear seal gasket for oil pan on a 1978 Chevy 350 motor


the oil pan will need to be removed to repalce the rear seal, so replace the front seal and gasket then, replace the timing chain/gears if sloppy, then reinstall the oil pan.

Dec 11, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

What is timing cover and if this goes do you need to replace timing chain and water pump


engine with 3.3 liters and 3.8 liters are equiped with timing chain.
the timing chain cover is the cover that cover and protect the chain
it must be seal because there is oil that come from the oil pan to lubricate the chain.
normally the cover does not go bad unless the chain broke or some thing hits it.
the water pump is out side and not involed in the timing chain or it cover

Mar 05, 2010 | 1996 Plymouth Voyager

1 Answer

Where is the oil sending unit on a 2002 Chevy Suburban V 8 engine?


Your oil pump is located under your oil pan. You need to remove the pan in order to access it. There is one bolt holding it in place, remove that bolt and then remove the oil pump. This is if you have a 4.3 liter motor.

If you have a 4.8, 5.3 or 6.0 liter motor it is considerably more difficult. If you need step by step instructions let me know, but to answer your question it is located behind the front cover of the engine. You need to remove the front cover exposing the timing chain and the oil pan in order to remove the pump on these motors. Let me know if you need further help.

Nov 04, 2009 | Chevrolet Chevy Cars & Trucks

1 Answer

Doing a timing chain and vct on right bank nearest


You do not need to remove the upper oil pan. There are 2 bolts that go through the oil pan into the front cover that has to be removed. You do not need to remove the transfer case to remove the front timing cover. After you have the bolts under the front cover that go through that lower oil pan, and the bolts all around the timing cover off, just work the cover slowly till it pops free.

Thanks Jay!

Jul 21, 2009 | Nissan Murano Cars & Trucks

3 Answers

2000 GMC Sonoma 4.3l V6 timing chain replacement


Sounds to me someone wants to make a couple of bucks. Does the truck still run? The timming chain is going to have play in it, even with only a few miles on it THATS JUST THE NATURE OF THE BEAST, the chanses of the timming chain going out is remote, I've owned a few 4.3's with well over 100.000 mi. and never had to chg. a timming chain, not to say it can't happend just saying its very remote.

May 15, 2009 | 2000 GMC Sonoma Extended Cab

1 Answer

Oil pump replacement


This MAY seem Strange But It IS ALL necessary for Oil Pump Replacement. And Please Don't Forget to Rate Me as Most Folks Do Not. Thank You and GOOD LUCK with the Oil Pump Job Also


OIL PUMP
It is necessary to remove the oil pan, oil pickup and chain case cover to service the oil pump rotors. The oil pump pressure relief valve can be serviced by removing the oil pan and oil pickup tube. Refer to Timing Chain Cover Removal and Installation for procedures.

DISASSEMBLY
  1. To remove the relief valve, proceed as follows:
  2. Drill a 3.175 mm (1/8 inch) hole into the relief valve retainer cap and insert a self-threading sheet metal screw into cap.
  1. Clamp screw into a vise and while supporting chain case cover, remove cap by tapping chain case cover using a soft hammer. Discard retainer cap and remove spring and relief valve.
  2. Remove oil pump cover screws, and lift off cover.
  3. Remove pump rotors.
  1. Wash all parts in a suitable solvent and inspect carefully for damage or wear.
Oil Pump Assembly
  1. Assemble pump, using new parts as required. Install the inner rotor with chamfer facing the cast iron oil pump cover.
  2. Tighten cover screws to 12 Nm (105 inch lbs.).
  3. Prime oil pump before installation by filling rotor cavity with engine oil.
  4. Install chain case cover. Refer to Timing Chain Cover Installation.
REMOVAL of Timing cover
REMOVAL
  1. Disconnect negative cable from battery.
  2. Remove timing chain cover.
REMOVAL Of Oil Pan to gain Access to OIL PUMP
  1. Disconnect negative cable from battery and remove engine oil dipstick.
  2. Raise vehicle on hoist and drain engine oil.
  3. Remove bending brace to transaxle attaching bolt.
  4. Remove bolts attaching dust cover to transaxle housing. Lower dust cover to gain access to oil pan bolts.
  5. Remove oil pan screws and remove oil pan.
INSTALLATION
  1. Clean surfaces and apply a 1/8 inch bead of Mopar (R) Silicone Rubber Adhesive Sealant or equivalent, at the parting line of the chain case cover and the rear seal retainer.
    1. Use a new pan gasket.
    2. Install pan and tighten screws to 12 Nm (105 inch lbs.).
    3. Install dust shield and bending brace to transaxle housing.
    4. Lower vehicle and install oil dipstick.
    5. Connect negative cable to battery.
    6. Fill crankcase with oil to proper level.

Mar 27, 2009 | 1998 Chrysler Town & Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...