Question about 2001 Mercury Grand Marquis

1 Answer

I cant find the factory five digit code to reset my keyless door panel. What do i need to do or how can i reset it. This is a 2001 Mercury Grand Marquis.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

This number is usually inside the trunk jamb. It's printed on a sticker. If you've the owners manual, there's also usually a card with the number on it. If you know your original code and are trying to reset a newer code back to the original, disconnect the battery for 10min. Loss of power will revert key codes back to original factory setting.

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyless entery keypad how to reset


Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the owner literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit mst be entered within five seconds of the previous button press.

Do you know the original five-digit code ? You need the original to reset with a new one .

Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code.
If you do not know the code ,it is located on the vehicle security module located under the dash some where or in the trunk . Sorry I can't be more specific ,my service info doesn't show sable .

Feb 17, 2016 | 2003 Mercury Sable

1 Answer

Need to change code on door key pad


  • Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.
  • Press the "1-2" button on the keypad immediately after inputting the factory code.
  • Enter the five-digit key code you wish to store for your keyless entry system within five seconds of pressing the "1-2" button.


  • Read more : http://www.ehow.com/how_7442543_program-entry-pad-mercury-mariner.html

    Jul 05, 2015 | 2008 Mercury Mariner

    2 Answers

    How do I change the keyless entry code for 2000 mercury grand marquis


    1.locate and enter the factory set code(taped to the computer module also located on trunk lid. 2.press the 1/2button within 5 seconds of step 1. 3. enter your personal 5 digitcode within 5 seconds. Allthedoors will lock and unlock to confirm programming of the new code.

    Apr 02, 2014 | 2000 Mercury Grand Marquis

    1 Answer

    Just purchased a 2003 mountaineer from a used car dealer and they don't have the manual and the alarm doesn't work. How do I get the factory entry code?


    the keyless entry code is on the module and in the module memory. A dealer can extract the code ( about $50). You can access the owner manual on line at motorcraft.com, pro center, tech info, owner manual. I have one for $7 plus postage. let me know. Also, look for a plastic credit card in teh glove box with the code on it. The module should be under the dash, driver side I think.


    Programming/Erasing Personal Code
    A unique personal five-digit code can be programmed by following these steps:
    1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
    1. Press 1/2 within five seconds of Step 1.
    1. Enter the unique five-digit code.
    The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
    1. Enter factory set five-digit code.
    1. Press 1/2 within five seconds of Step 1.
    1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
    The system now responds only to the factory set code.
    Anti-Scan Feature
    To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad flashes during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
    Anti-Scan will be turned off after one minute of keypad inactivity.
    Unlocking the Doors and Liftgate with the Keyless Entry Keypad System
    To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
    To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
    To open the liftgate window glass, enter the factory set code or the personal code (driver door unlocks) and press the 5/6 control within five seconds.
    Locking the Doors with the Keyless Entry Keypad System
    It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time

    Dec 21, 2010 | 2003 Mercury Mountaineer

    1 Answer

    Need to find the computer module with the factory keyless entry code for a 2003 Mercury Grand Marque GS


    the code is usually found on stickers on the trunk hinges. if not remove the drivers door panel, the code is on the module that is in the door. use that code to access all functions including setting your own code.

    Sep 04, 2010 | 2003 Mercury Grand Marquis

    1 Answer

    How to change the keypad code on a 2001 mercury grand marquis


    look for the permanent code on the plastic card in the owner manual packet. Or, pay dealer to extract code from computer.

    Keyless Entry Keypad Code Programming NOTE: The system only allows one code to be programmed.
    1. Enter the permanent factory keyless entry keypad code.
    1. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will erase the stored customer code . The door locks will lock, then unlock, confirming the code is erased. The existing code will not need to be erased to program new a code.
    1. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed.

    Feb 08, 2010 | 2001 Mercury Grand Marquis

    2 Answers

    How do i reprogram keyless entry codes


    door pad keyless codes?

    in owner manual, enter permanent code and then press "1" and enter personal code, then press "1" again. Then both codes will work.

    If you don't have manual, go to Motorcraft.com and click on technical resources and click on your year owner manual.

    ---------------------------------------------
    Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the Owner Literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit must be entered within five seconds of the previous button press.
    Programming/Erasing Personal Code
    A unique personal five-digit code can be programmed by following these steps:
    1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
    1. Press 1/2 within five seconds of Step 1.
    1. Enter the unique five-digit code.
    The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it will simply overwrite the previous personal code. To erase a personal code, carry out the following procedure:
    1. Enter factory set five-digit code.
    1. Press 1/2 within five seconds of Step 1.
    1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
    The system will now only respond to the factory set code.
    Anti-Scan Feature
    To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad will flash during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
    Anti-Scan will be turned off after any of the following events:
    • one minute of keypad inactivity
    • the keyless entry remote transmitter UNLOCK button is pressed
    • the ignition is turned to the ON position.
    Unlocking the Doors with the Keyless Entry Keypad System
    To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
    To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
    Locking the Doors with the Keyless Entry Keypad System
    It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time.
    Inspection and Verification
    1. Verify the customer concern by operating the system.
    1. Visually inspect for obvious signs of mechanical or electrical damage.

    Dec 01, 2009 | 2004 Ford F350

    2 Answers

    Where is sticker with factory 5 digit keyless entry code located on 2001 grand marquis


    You should find it on the hinges in the trunklid and sometimes on a hood hinge. They can be in door jams and on door hinges. Your owners manual usually has a plastic card for your wallet.

    If no success contact the dealer with your VIN#.

    Nov 16, 2009 | 2001 Mercury Grand Marquis

    3 Answers

    Keyless entry


    I believe dealer has to re-program the new code.

    Aug 29, 2008 | 2001 Ford Explorer Sport Trac

    Not finding what you are looking for?
    2001 Mercury Grand Marquis Logo

    660 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    fordexpert

    Level 3 Expert

    5467 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...