Question about 2005 Toyota Corolla

Open Question

The factory alarm on my 2005 Toyota Corrolla was activated and dont know how to deactivate it. The car wont start

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Factory installed alarm won´t deactivate

Open the door insert key in ignition. turn to on

Now hold down the red button which should be flashing, untill silent

this will deactivate the alarm.


Posted on Jul 16, 2008

  • 240 Answers

SOURCE: 99 toyota corrolla hood latch is broken. Can't

There is a rachet right below the hood that you can reach from radiator grill.
Take a long thin screw driver, reach it and turn that rachet.
You will hear the "click" sound and the hood will pop open.

Posted on Jun 24, 2009

  • 1 Answer

SOURCE: 2001 toyota rav4. how do you deactivate the alarm

Followed your recommendation of holding the valet (red) button for 6 seconds. It deactivated the alarm system and I was able to start the vehicle. This solution saved me from buying another key from the dealership (139$) and a programming charge of (100$). And not to mention the time saved from towing the vehicle to the dealership. I can't thank you enough for time and money saved with this valuable service. Will be signing up with your service when I get back from Orlando.

Posted on Aug 19, 2009

  • 32 Answers

SOURCE: 97 toyota 4runner factory alarm not allowing to start

lock your doors and close it wait till alarm resets and then unlock door with key and this should take care of you problem

Posted on Jan 05, 2010

  • 462 Answers

SOURCE: the factory alarm on my 2009 Toyota Rav4 was

Try to close doors and lock it with the key , not remote.
Then take the key out , wait 20-30 sec. and unlock it with the key.
After that try to start engine.

Posted on May 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Alarm was activated when doors were unlocked now i cant deactivate the alarm with the keys or the fob. now my kia wont start.


try disconnecting battery from car, just like computers, if it doesn't work reboot it. reconnect battery after 5 minutes and check result. If that fixes it still check with Kia forums for more information

May 26, 2015 | 2005 Kia Sorento

1 Answer

Alarm activated so car wont start and dont know how to reset. ran fine all day.


Under the dash board on your driver side there is a wire with a button turn the ignition but don't turn it on and hold the button on the wire till u get a steady light.. Deactivated

Jan 10, 2013 | 2006 Jeep Commander 5.7

1 Answer

I have a 2005 JGC 5.7 hemi and sometimes remotes wont work only when you want to unlock it.If you use the key to open door alarm sounds. what could be the problem?


Have you tried a new battery in the remote, or do you have a second remote you can test. Either your remote is worn out or the battery is dead.
Once you lock the car with your remote it will active the alarm and if you use your key it won't deactive the alarm only your remote will, on some cars putting the key in the ignition will deactive it.
If you can deactive your alarm with your remote and can just manualy lock and unlock your doors and that should prevent your alarm from going off until you get a new remote or battery.

Aug 05, 2011 | 2005 Jeep Grand Cherokee

1 Answer

My factory alarm on my 1999 rav4 is constantly turning on for no apparent reason and i don't have the remote controller how do i disactivate it?


what do you mean by deactivate? totally shut the alarm off? if thats what u min, under the dashbord look for the alarm unit, then pull it out from its socket connector... thats it, problem solve... if you dont know what alarm looks like, its a small box approx. 2x3 inches in size.

May 16, 2011 | Toyota RAV4 Cars & Trucks

1 Answer

How to start toyota camry without the key


you most likely wont start it without a key, if it has a factory immobiliser the key has a transducer in the base of it that activates & deactivated the immobiliser when it is put in or pulled out of the ignition switch.......hope this helps.....cheers

Aug 07, 2010 | 2005 Toyota Camry Solara

1 Answer

The factory alarm on my 2009 Toyota Rav4 was activated and I turned it off and now the car wont start, how do you reset the stock alarm?


Try to close doors and lock it with the key , not remote.
Then take the key out , wait 20-30 sec. and unlock it with the key.
After that try to start engine.

May 27, 2010 | 2005 Toyota Corolla

1 Answer

2005 Grand Cherokee: my alarm is activated on my jeep and it won't star...


Replace the battery in th key fob to allow you to deactivate the alarm system. Use a small thin edged screw driver to pop open the cover on the fob to replace the battery.

May 05, 2010 | 2005 Jeep Grand Cherokee

1 Answer

My car wont start, but there is an alarm noise on! How can I get the car to start and the alarm to stop?


did you stick the key in the drivers door and turn it counter clock wise then clockwise?this is how you deactivate the factory alarm from these cars.do this and i believe it will deactivate the alarm and also you will be able to start your car too. take care and good luck, manny

Apr 15, 2010 | 1996 Toyota Corolla

1 Answer

My Truck honks 1 time randomly when alarm is activated


This is a factory system? don't remember any LED in a factory system.

Nov 25, 2008 | 2004 Ford F150

1 Answer

Central locking not working


Firstly establish if your c/locking is factory fitted or after market. If factory fitted check the fuse box for any blown fuses. If after market then their is a fused +12v line running to a normally black unit which controls the C/Locking, check that. If no luck with that take it to a fitment center who can diagnose that within 5 minutes

Nov 12, 2008 | 1994 Toyota 4Runner

Not finding what you are looking for?
2005 Toyota Corolla Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...