Question about 1996 Chevrolet Blazer

1 Answer

My power window is stuck half way it will not close for me whats the problem and how can I fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

The window power unit has a connection that it rubber type material in it to help bypass it is stripped out at that point They used to be replacement for that without having to buy the whole unit but that part or the unit will need replacing

Posted on May 02, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1118 Answers

SOURCE: the driver's side power window is stuck half way up on 1998 buick century limited. What is the problem?

It could be the fuse, does it go down? If not chk. fuse, if fuse ok, see if you can help it down by pushing down on window wile working switch, and also same wile trying to go up, if it don't work or if its slow chanses are the motor is tired and needs replaced or its lost power like bad switch or broken wire. there is also a chanse it came off the track in witch case the door panel will have to be removed.

Posted on Apr 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE CAN I DOWNLOAD A 2004 CADILLAC CTS REPAIR MANUEL?


Here's a description the sun roof
Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof module
• Sunroof switch
• Sunroof motor, with 2 hall effect sensors and limit switch
• Sunroof window
• Sunroof sunshade panel
• Power supply for the sunroof module: RAP 25 A
• Ground G402

Override
The override function is used when needing to force a closing of the sunroof window. To override the system:
Turn ignition to ON.
Rotate the sunroof switch to the close position.
Press upward.
The sunroof switch data 6 circuit, or override circuit, will become grounded at the sunroof module. As long as the sunroof module sees this input, it will continue to slide the sunroof window to close, regardless of the other sunroof switch data circuits inputs.

Oct 28, 2016 | Cadillac Cars & Trucks

1 Answer

My 2003 chevy venture power door will only close half way. how do I fix that


Look too see in the bottom of your door track to see if there's something stuck in there

Apr 21, 2014 | 1997 Chevrolet Venture

1 Answer

1998 Jaguar XJ8L Sunroof closes immediately upon opening and more


www.jaglovers.org.is the best place for all things jaguar..

Apr 01, 2010 | 1998 Jaguar XJ8L

1 Answer

A190 front side window stuck in half open position


Hi. The Front windows are on a seperate fuse from the rear and this MAY be your problem. the fuse for the front windows is fuse No 33 - 30amp. (that’s the fourth fuse from the left / centre row, the fuses are numbered) The Rear window fuse is No 42 just for information.

If the battery has been discharged you MUST!!! Reset the Power Windows and Traction control. It's very simple and the instructions are in your driver’s manual. But just in case you don’t have it, here they are:

Resetting the side Power Windows
If the voltage supply is interrupted (battery disconnected or flat), the side windows must be reset to prevent injury to driver or passengers:
  1. Turn the key to position 2 in the ignition lock.
  2. Press on the switches to the (Up or Closed position) pressure point until the windows are fully up, and hold for approximately 1 second.
Resetting the ESP (Electronic Stability Program or “Traction Control Systems”)
If the voltage supply is interrupted (battery disconnected or flat), the indicator lamp will light up while the engine is running.
  1. Turn the steering wheel from stop to stop while the engine is running. The indicator lamp will go out & the ESP system is reset.
If you need a copy of all the fuse values and locations etc. Post a reply here at FixYa with your email address and I will forward you a schematic diagram……..[did one for myself that’s easier to understand / follow than the Merc one]

Hope this helps!!!!

Jul 05, 2009 | Mercedes-Benz 190-Class Cars & Trucks

1 Answer

The driver's side power window is stuck half way up on 1998 buick century limited. What is the problem?


It could be the fuse, does it go down? If not chk. fuse, if fuse ok, see if you can help it down by pushing down on window wile working switch, and also same wile trying to go up, if it don't work or if its slow chanses are the motor is tired and needs replaced or its lost power like bad switch or broken wire. there is also a chanse it came off the track in witch case the door panel will have to be removed.

Apr 14, 2009 | Buick Century Cars & Trucks

2 Answers

2003 vector drivers side power window won't stay up


Your pinch protection is not correctly set. You can defeat the pinch protection by holding down the window lock button when you close the window. However, to "solve" the problem, you need to reset the pinch protection. My dealer charged me $100 to reset the pinch protection on my 2003 9-3 Arc.

Mar 09, 2009 | 2003 Saab 9-3

1 Answer

My rear passenger window on my vauxhall corsa will not close its open half way and i ve tried to close it but its stuck.please can you suggest a way to close the window without braking the handle or...


it may but i would take the door apart to see what is caiusing the situation that is going on and its definately not the glass sounds like the regulator/ Please rate my response

Feb 01, 2009 | 1984 Saab 900

1 Answer

Power window problem


First check the power window fuse,
1. Remove the door panel for the affected window.
2. Locate and remove the bolts holding the regulator to the door; it is likely you will have to manually lower the window in order to access the bolts.
3. Remove the old regulator, disconnect all wiring and check the wiring , replace the old regulator with a new one if defective.
4. Tighten the bolts holding the new regulator and reinstall the moisture barrier. Make sure all the wires are put back in the door before closing the door panel.
5. Engage the power window switch and the new regulator should work unimpeded.

Jun 09, 2008 | 1994 Suzuki Swift

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...