Question about 1994 Toyota Land Cruiser

Open Question

How do I adjust (tighten) fan belts etc on 1994 toyota hiace 2.8 ltr diesel. access to area difficult as well. do I need special tools? thank you.

Posted by on

  • afrin3 May 11, 2010

    Here is your solution » BMW »
    Buick »
    Chevrolet » Chrysler » Dodge » Ford » GMC » Honda » Hyundai » Jaguar » Lincoln » Mazda » Mercury » Mitsubishi » Nissan » Oldsmobile » Pontiac » Saturn » Subaru » Suzuki » Toyota » Volkswagen » Volvo a1

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrmx2333
  • 56 Answers

SOURCE: 08 toyota sienna van and oil filter change

a local auto parts store will have every thing you need including manuals

Posted on Dec 30, 2008

Caesarfix
  • 141 Answers

SOURCE: Toyota Hiace 99 Fuel filter change

Look first right rear back under fuel tank,< If not, follow fuel lines from fuel tank one main line, one return line, traveling parallel to frame all the way to the motor compartment on front, can be front under right passenger side, first by the filter at the auto parts, that way you will know what to look for

Posted on Jan 21, 2009

  • 1 Answer

SOURCE: Hiace Toyota

Near the foot-step on the front passenger door (open the door first!)

Posted on Mar 18, 2009

badnad
  • 1 Answer

SOURCE: How do you disassemble toyota hiace 2006 dash?

Its easy, The only tool you need is a plastic lever tool. Or can be done with big head screw driver (but car for the trims for it can get damaged)
Lever both side vents out, then pull on the trim gently outwards. (long piece from glove box to the end of the radio before the instrumental dash panel) Then pull the main inturmental dash out towards you as well. There may by plugs connected to the front panel. Disconnect that and it exposes the digital meter, I think it then takes only 2 x 10m bolts and the dash is out.

Posted on Dec 06, 2009

  • 1 Answer

SOURCE: how to change gearbox oil on a toyota hiace van...

Creating Gears Problem 1st and 3rd sleeping gears, how to romove this problem

Posted on Oct 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toyota hiace 3L when l start it idle normal but later it start raving on its own as if someone is pressing excelarator what could be the problem?


its a diesel ...this is the 2 ltr motor for an L3
when was its last service ?
is the idle adjustment knob in the cab on start up ok
then you wind it back
could be a vacuum issue/ sticking throttle cable
fuel pump problem /injectors
air filter
how old are the glow plugs



26279058-yqykbunjevtsx4rn1d2hale1-5-0.jpg

Sep 09, 2016 | Toyota HiAce Cars & Trucks

1 Answer

1994 toyota 4runner v6 valve adjustment?


Shims are ONLY available from the Toyota dealer. The special tools are reasonably priced and can be found on EBay or elsewhere on the Internet. That said, I'm a professional mechanic. Even for me, the job is a PITA [difficult] This is not a job for an amatuar mechanic. It will be an expensive job.

May 11, 2014 | 1994 Toyota 4Runner

1 Answer

Need to know which belt is closest the firewall on a 1999 toyota diesel hiace regius


1999 no car body or model car stated so NO JOY, nor country.
generic answer.
same as all cars.
find the pulleys effected, look at each, 1 has an adjuster.
loosen it, put on belt and set tension to spec.
end.

Dec 22, 2013 | Toyota Cars & Trucks

1 Answer

How to change belts on a toyota hiace regius diesel van


NO YEAR NO JOY.. lots of years, vast. and countries sold.
No engine stated, no joy 2. lots of engines used... world wide.
what year, what country. ?
fan belts?
the belt that broke goes to a pulley, and said pulley now stalled will fail.
so which pulleys are stalled.?
Alternator
water pump
P/S (steering)
Air conditioning, compressor.

if not sure whats under hood, get the FSM book
or ask a gear head, or post a photo.

Dec 22, 2013 | Toyota Cars & Trucks

1 Answer

Fan/ alt. belt broken. Difficulty of replacement?


I'm assuming you have the 4cyl ... 22RE. On my truck the biggest problem was loosening the bolt that the alternator pivots on ... difficult to get at. I found one of the small palm type ratchets helpful. As I recall this belt is the innermost so you will have to remove the A/C and power steering belts to replace it. It's probably time to replace them all if one broke any way. The outer two have tensioners and so they're easy to adjust/remove ... the alternator you need to pry on it some to get the tension and then tighten the bolt that holds it in place ... and then tighten the previously mentioned pivot bolt. By the time you remove the splash pan to access the bottom etc you'll put a fair amount of time into the project but it's not difficult. And you'll know how to re-tension the belts when the time comes.

Dec 10, 2010 | 1994 Toyota Pickup

4 Answers

Do I need any special tools or wedge to change a timing belt for 2001 tdi jetta diesel.


Timing Belt Spanner Wrench
AST tool# H 2587-1

- Used for the Adjustment of the Timing Belt
- Applicable to 2004-2005 VW Golf, Jetta Pump Duse and 2002-2005 Audi 3.0 V6

Used for the adjustment of the timing belt.

2009 Suggested user price: $52.67

Assenmacher Specialty Tools
1 800 525 2943
Timing Belt Spanner Wrench
AST tool# H 2587-2

- Used for Adjusting the Timing Belt Tension
  • Applicable to 1999 and later VW Golf and Jetta, Passat and 1999-2003 VW Beetle with 2.0L Gas Engine and 1.9L T.D.I. Diesel Engine
Used for adjusting the timing belt tension and is comparable to VW tool# T10020. Applicable to 1999 and later VW Golf and Jetta, and 1999-2003 VW Beetle with 2.0L gas engine and 1.9L T.D.I. diesel engine.

2009 Suggested user price: $52.67

Assenmacher Specialty Tools
1 800 525 2943
128947643

Jul 02, 2010 | 2001 Volkswagen Jetta TDI

3 Answers

Need diagram on alternator belt replacement on a


If the same as my '94 cyl then you tighten the belt by loosening the bolt that the alternator pivots on and the bolt that tightens the alternator to it's adjustment bracket. For my truck this is neither fun nor easy. The a/c and power steering belts having idler pulleys with adjustments on them making them MUCH easier to deal with.

Mar 17, 2010 | 1994 Toyota Pickup

3 Answers

1999 kia sportage timing marks


dfd3ea1.gif Crankshaft match marks


Align marks on timing belt pulley and pump body.

Camshaft pulley alignment marks
9f1c7ef.gif
  1. Align marks on camshaft pulleys with alignment marks on seal plate.
  2. Install timing belt. NOTE: No looseness should exist on the tension side and at the camshaft pulleys.
  3. Loosen tensioner lock bolt.
  4. Turn crankshaft 2 revolutions in direction of rotation and check that timing marks are still in alignment.
  5. Tighten timing belt tension lock bolt to 27-38 ft lb (32-52 Nm).
  6. Apply a force of 22 lbs to timing belt between camshaft sprockets.
  7. Belt deflection should measure 0.30-0.33 in (7.5-8.5 mm)
  8. NOTE: Replace tensioner spring if timing belt deflection is excessive.
Timing Belt Installation


eb770f2.gif
  1. Install lower timing belt cover.
  2. Install upper timing belt cover.
  3. Install power steering drive belt and adjust belt tension.
  4. Install fan pulley.
  5. Install generator drive belt and adjust belt tension.
  6. Install A/C drive belt and adjust belt tension.
  7. Install splash guard.
  8. Install fan and fan shroud.
  9. Install 4 fan bolts. Tighten to 24 ft lb (33 Nm).
  10. Install fan shroud mounting bolts.
  11. Install fresh air duct.
  12. Connect hose to resonance chamber.
  13. Connect battery negative cable.

Jul 26, 2009 | 1999 Kia Sportage

2 Answers

1998 dodge neon airconditioning belt adjustment?


This procedure involves correcting the tension on the power steering accessory and A/C compressor drive belt.

1. Loosen the power steering pump locking bolts A and B and pivot bolt C(Illustration 1 and 2 ) to allow adjustment of belt tension.
2. Using a 1/2" breaker bar, adjust belt tension by applying torque to the square hole "D" on the power steering pivot bracket. Adjust the tension as follows:

Belt tension with no belt replacement: A. Using the Belt Tension Gauge Special Tool Kit C-4162, adjust the belt tension to 100 lb.
B. Tighten in order, first tighten the locking bolt A to 27 Nm (20 ft. Ibs) then, bolt B to27Nm (20 ft. Ibs). Finally tighten the pivot bolt C to 54 Nm (40 ft. Ibs).
Belt tension with belt replacement:
A. Using the Belt Tension Gauge Special Tool Kit C-4162, adjust the belt tension to 135 lb.
B. Tighten in order, first tighten the locking bolt A to 27 Nm (20 ft. Ibs) then, bolt B to 27Nm (20 ft. Ibs). Finally tighten the pivot bolt C to 54 Nm (40 ft. Ibs).
C. Start the engine and allow the vehicle to idle for 15 minutes to allow the belt to seat.
D. Repeat the belt tensioning procedure, set belt tension to 135 lb.

click here for picture 1
click here for picture 2

Jun 13, 2008 | 1998 Dodge Neon

Not finding what you are looking for?
1994 Toyota Land Cruiser Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...