Question about 2003 Volkswagen Passat

1 Answer

Right turn signal blinks very fast I changed all bulbs and problem still exists all tail lights have been replaced

Posted by on

  • djeccn May 02, 2010

    I checked the wattage and they say 2 watts thank you very much

  • djeccn May 02, 2010

    I checked the bulbs and they say they are 2 watts

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 22,095 Answers

I think you have a bulb thats the wrong wattage ,they should be 21watt

Posted on May 02, 2010

  • Colin Stickland
    Colin Stickland May 02, 2010

    2 watts or 21 watts

  • Colin Stickland
    Colin Stickland May 02, 2010

    also check that the bulbs have a good earth as a low resistance earth will cause this problem ,especially on the back light cluster ,this is where 80% of the faults i repair occur

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...


mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

May 19, 2011 | 2007 Jeep Grand Cherokee Overland

3 Answers

My rear brake light is not working, nor is my blinker at the back right. When I put the right turn signal on it blinks really fast, faster than normal, and the front blinker works. I have replaced both...


Normally with the blinker blinking really fast, it's telling you that one of the bulb is blown, front or rear signals. Check your fuse, and fuse relay to see if it would fix the promblem

Jan 23, 2011 | Chevrolet K3500 Cars & Trucks

2 Answers

Right turn signal blinks very fast I have changes the light and all other lights on the rear but the problem still exists. 2003 passat wagon 4 cylinder


I had the same problem with my 2002 Jetta. The front right bulb wasn't working. I replaced the bulb and it still didn't work, that's when I found that the bulb could be inserted backwards! I turned the bulb 180 degrees and now the blinkers are normal.

Another thing I noticed was that one of the contacts on the bulb and socket were burnt. I bought the car used in 2010 and I verified that the flasher relay was replaced as part of the recall, so I don't know if the damage was done before the relay was replaced or I still have a problem. I will keep an eye on the bulb about one a month.

May 21, 2010 | Cars & Trucks

2 Answers

2005 mustang right turn signal wont work but bulb lights when lights are on. When signal is on only the first bulb blinks (and twice as fast as left signal) and second signal bulb doesn't work at all.


Replace the bulb(s). Tail light bulbs have more than one filament. One is for the brakes and one is for the turn signals. The reverse light is a light all by itself. When the filament for the turn signal goes out the brakes will still all light up, but the turn signal will not.

Oct 31, 2009 | 2005 Ford Mustang

1 Answer

2001 Olds Silouhette - The blinker on the dash blinks quickly


NO PROBLEM TURN ON THE RIGHT BLINKER THEN WALK AROUND THE CAR MAKE SURE FRONT AND REAR BULBS ARE FLASHING... IF YOU HAVE A BULB OUT YOU WILL NOT OFFER ENOUGH OF A LOAD TO THE FLASHER... WILL CAUSE IT TO FLASH FAST... IF OK THEN MAKE SURE THE PROPER BULB NUMBER ON BULBS AND MAKE SURE CORRECT BULBS USED IN VEHICLE.... IF OK CHANGE FLASHER

Aug 31, 2009 | 2001 Oldsmobile Silhouette

2 Answers

Left rear turn signal light on my 1999 chev. s10 is not working


any increase in bink speed is direcly related to a bulb being burt out.

Jun 12, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

1997 Cheverolet z71 blinker problem


the most common problem is the light boeard in the tail lights usually replace the board full of bulb sockets and that takes care of it but before condeming the board make sure you are getting power to it

Mar 07, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2003 Volkswagen Passat Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...