Question about Ford EXP

1 Answer

8360 new holland tractor tansmission oil pressure light showing and error code F41 and F44 flashing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,246 Answers

Havent worked on one but if oil pressure light is showing on the gearbox then something is wrong ,either oil is low or the pump has packed up or the pick up pipe filter is blocked .either way what i do know is that seperating the units is a big job requiring specialist equipment which no doubt you know already,

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New holland ts 120 oil pressure to high where is the pressure relieve valve situated? the oil pump is in the dif.


There is no relief valve on the oil pump.
The valve is on a housing near the oil filter
Normal pressure with HOT oil is 15 to 20 PSI at tick over and around 60 PSI when the engine is reved up
Note oil pressure can be as high as 90 psi with engine oil cold and engine reved up

Dec 12, 2016 | Cars & Trucks

1 Answer

Oil pressure


If the manual T gauge is giving a higher oil pressure reading than the gauge on your dash - believe the manual gauge.

The oil pressure gauge on your dash receives a signal from an oil pressure sensor. It may well be that the oil pressure sensor is faulty

Mar 25, 2016 | Cars & Trucks

1 Answer

Code p0011 bank 1 intake timing position is over advance,oil light flashes/comes on when i take off/slow down or at complete stops


The computer controls the cam timing by using a solenoid valve inside the engine. The valve works by oil pressure.
The code means the computer can not control the valve timing. Usually the valve is faulty or there is a problem with oil pressure.
Since you say the oil pressure light is coming on, I would expect to find a problem with the oil pump or excessive dirt in the engine.
If the oil pressure switch is good, it will turn the light on when the oil pressure drops below 5 psi. And if it is that low, I doubt oil is reaching the valves.

Jul 20, 2012 | 2002 Nissan Maxima

1 Answer

Have 2001 dodge dakota showing low oil pressure by meter not light error code shows p done


install a new oil sending unit and change oil and filter should take care of it,oil sending unit is around the oil filter area

Dec 03, 2009 | 2001 Dodge Dakota

1 Answer

2001 a4, oil pressure light alarm.


Your mechanic is yanking your chain. (or you mis-understanding.)

Oil pressure light does not have to be "reset." There may be CODES that need to be reset but they would turn on the CHECK ENGINE LIGHT. (I think, on your car, this is picture of engine with a check mark.) If the Check Engine Light (CEL) is flashing, it means you have a serious engine problem and should NOT be driving the car without finding the reason for the light. (Around here, many auto parts store will "pull the codes" for free.)

Oil pressure light could mean you are low on oil, have a bad sensor, wire or even a oil pump. The oil pump is inside the engine.

Aug 20, 2009 | 2001 Audi A6

1 Answer

Flashig oil light


You either have a loose/worn engine bearing or a worn out oil pump, do not drive the car this way, you will cause serious damage to the whole engine. A oil switch is for a light, it turns on the light when oil pressure falls below about 10 PSI, a sending unit is for a guage that shows oil pressure with a scale, it may have numbers on the guage or just green and red, or high and low.

Oct 10, 2008 | 1992 Buick Roadmaster

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...