Question about Chevrolet Silverado 1500

1 Answer

2001 chevy while driving the doors unlock and lock

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. You’ll need to programme the key. To programme it, close all the doors and put the key in the ignition. Now press and hold the unlock button on the door. While holding the unlock button, turn the key on, off, on, off then release the unlock button. The locks should cycle to confirm it is in the learn mode. Press and hold the lock and unlock buttons on the fob. After 15 to 20 second the locks will turn on and off to confirm program of the fob. You’ll need to repeat this procedure up to four times. After program, turn the key to run then off to exit learn mode. Operate the transmitter functions in order to verify correct system operation. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do doors lock and unlock while in motion?


2009 LTZ/Cycling (on/off) Door Locks - Chevy Malibu Forum ...

www.chevymalibuforum.com/forums/showthread.php?t=6599

10 posts - ‎8 authors
02-17-2011, 07:26 AM ... Two or three times while driving( in motion) the door lockswill cycle two or three times through the lock/unlock positions and then will stop. ...Since i can't produce this glitch on demand there is no point taking it to the dealer. ...The Malibu system will not let you lock the doors when the door is open.

Door Lock Actuator Recall? - Page 4 - Chevy Malibu Forum ...

www.chevymalibuforum.com/forums/showthread.php?t=7950&page...

Sep 23, 2011 - 10 posts - ‎7 authors
When I was driving this afternoon, the car would unlock itself at random intervals. ... It is reasonable to expect that Chevy could design a car whose doors remain locked while the car is in motion. ... 2009 Malibu 2LT, Adopted 5-7-2011 ... If you can get them to replace ALL 4 of them for a $100 deductible, I'd ...

[PDF]2011 Chevrolet Malibu Owner Manual

https://www.chevrolet.com/.../Chevrolet/.../2011_chevrolet_malib... ChevroletChevrolet Malibu Owner Manual - 2011 ..... remotely lock and unlock the doors from up ... The trunk can only be opened when ...... the vehicle is in motion can be.

Dec 29, 2015 | 2011 Chevrolet Malibu

1 Answer

2005 Chevy Impala. The door locks keep locking during drive.


It's probably a bad input to the BCM - body control module ! Have it checked for DTC'S - diagnostic trouble codes .
The automatic door lock function can only be enabled by the body control module (BCM) if the driver door open switch and door ajar switches are in the Closed state. For information on programming the automatic door locks, refer to Vehicle Personalization in Personalization.
DTC B3064 or B3069
DTC B3127
DTC B3128, B3133, or B3138
DTC B3132
DTC B3137
DTC B3272
Your best bet , take it to the chevy dealer . Unless you own a GM factory Tech 2 scan tool an have access to factory sevice repair info.
.
The outputs to the door lock actuators are controlled by the body control module (BCM). When the BCM receives a lock input from a door lock switch, or a keyless entry transmitter, it applies battery positive voltage to the door lock actuator lock control circuit, a ground to the door lock actuator unlock control, and the driver door lock actuator unlock control circuits. When the BCM receives an unlock input from a door lock switch, it applies battery positive voltage to the door lock actuator unlock control, the driver door lock actuator unlock control circuits, and a ground to the door lock actuator lock control circuit . When the BCM receives an single Unlock input from a keyless entry transmitter, it applies battery positive voltage to the driver door lock actuator unlock control circuit and a ground to the door lock actuator lock control circuit to unlock the driver door. A second Unlock input from the transmitter applies battery positive voltage to the door lock actuator unlock control circuit, and a ground to the door lock actuator lock control circuit to unlock the passenger doors.

This diagnostic procedure supports the following DTCs:
• DTC B3128 Left Front/Driver Door Unlock Circuit High
• DTC B3133 All Door Unlock Circuit High
• DTC B3138 All Door Lock Circuit High

Jul 21, 2017 | Cars & Trucks

3 Answers

How do I reset door locks on my 2003 chevy trailblazer?


Door locks don't reset. the work or the don't. If your talking about the fob. It has to be reset with a scanner.

Dec 08, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

I have a 2001 Chevy Monte Carlo ss the drivers side door lock button hasn't worked for sometime now. Can I just replace the lock/unlock button ??


Do you mean that you cannot lock/unlock the door with the central locking system?

If so you will need to have the actuator in that door removed and a new one fitted.

Dec 22, 2012 | Cars & Trucks

1 Answer

Have a 2004 Chevy Venture van with faulty power door locks. They will lock with the switch but will not unlock with the switch. Need schematics of the power door lock system. Thanks.


I don't have a solution, but a related problem. Our 2004 Chevy Venture power door locks are cycling (locking/unlocking) on their own while we are driving. This coincides with our remote keyless entry losing its effectiveness. I tried replacing the battery on the remote, but to no avail.

Mar 28, 2010 | 2004 Chevrolet Venture Passanger

1 Answer

2008 Chevy Blazer automatic door lock problem


you have a short in the locking system.

Aug 12, 2009 | 1996 Chevrolet Blazer

2 Answers

Door locks quit working


check battery in the remote

May 10, 2009 | 2006 Chevrolet Tahoe

1 Answer

4 door 2001 chevy blazer front power locks will not work.


SOUND LIKE THE DRIVERS DOOR LOCK SWITCH IS STUCK IN THE UNLOCK POSITION. SINCE THE DRIVERS DOOR LOCK SWITCH OVER-RIDES THE PASSENGER DOOR, I WOULD REPLACE THE SWITCH WITH A NEW ONE. HOPE THIS SOLVES THE PROBLEM. GOOD LUCK. KEEP US POSTED, WE ARE ANXIOUS TO KNOW.

Apr 30, 2009 | 2001 Chevrolet Blazer

1 Answer

Automatic door locks / 2001 Chevy Suburban


Your book should give you program options for the door locks If your fob wont work either you got a relay for the door lock bad it is located in the fuse panel push the door lock button and find the one that is clicking

Apr 11, 2009 | 2001 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...