Question about 2005 Ford Explorer

Open Question

I have a 2005 ford explorer and my abs light stays on, my advtrac light is on and the 4x4 light is blinking on and off any answers would be welcomed.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jturcotte
  • 8192 Answers

SOURCE: our abs light advtrac light

You may have a bad wheel bearing--do you hear a growing noise that gets louder with speed? The wheel sensors on your wheels are sensitive to excess motion between the wheel hub and the wheel, as they have a small gap between the sensor and the tone ring on the axle. The speed sonsors are used by both the ABS and the traction control systems on your truck. You can check your bearings for failure by jacking up the car and trying to shake the wheel. If the wheel doesn't have noticeable play, the bearing may still be bad enough to cause the sensor to misread the speed. If you're not sure, have your mechanic check the wheel bearings. If you have more questions, please let us know.

Posted on Oct 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 ford explorer abs light constant and 4x4 blinking any ideas?


According to the manual pg 10. http://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/04expog3e.pdf
Anti-lock brake system: If the ABS light stays illuminated or
continues to flash, a malfunction has been detected, have the system
serviced immediately. Normal braking is still functional unless the brake warning light also is illuminated.

Apr 16, 2014 | 2004 Ford Explorer XLT

1 Answer

Check advtrac


either one of the wheel sensors is out of adjustment or the brakes are worn to replacement thickness.. check and replace if necessary..

Jan 01, 2014 | 2005 Ford Explorer

1 Answer

2004 Ford Explorer ABS, Service Engine Soon lights stay on and the 4x4 light flashes. Why?


Abs is bad sensor in hub bearing,engine light you need obd 2 scanner to read and reset code,

May 11, 2013 | 2004 Ford Explorer

1 Answer

2005 ford explorer ABS, SES LIGHT, AND ADVTRAC LIGHT ON


The first thing to do is to have the ABS and engine computers scanned for trouble codes.
The problem with the check engine light could also turn on the ABS and traction control lights. Or it could be different issues.
The gas gauge being out of calibration could be the float in the gas tank or the gauge on the dash. I doubt that problem is related to the warning lights.

Feb 16, 2013 | 2005 Ford Explorer

1 Answer

Our abs light advtrac light will stay on when I turn right and our 4x4 light flashes. we have a 2005 ford explorer with new brakes


You may have a bad wheel bearing--do you hear a growing noise that gets louder with speed? The wheel sensors on your wheels are sensitive to excess motion between the wheel hub and the wheel, as they have a small gap between the sensor and the tone ring on the axle. The speed sonsors are used by both the ABS and the traction control systems on your truck. You can check your bearings for failure by jacking up the car and trying to shake the wheel. If the wheel doesn't have noticeable play, the bearing may still be bad enough to cause the sensor to misread the speed. If you're not sure, have your mechanic check the wheel bearings. If you have more questions, please let us know.

Oct 28, 2010 | 2005 Ford Explorer

1 Answer

ABS light on blinking 4x4 high ligh griding noise wheel well


your front hubs are probably going out thats the noise you are hearing and thats why your 4x4 lights probably on and that being said your abs sensors are part of that hub assembly so the sensors are probably full of metal, they are a magnetic sensor just jack the front of your vehicle up and spin the tire by hand and you will find the bad one the drivers side usually goes first, but my as well do both at the same time

Mar 15, 2010 | 2004 Ford Explorer

1 Answer

My abs lights and advtrac lights came on simultaneously and i don't know why


It means you have a fault in your vehicles antilock brake system. Having the light on will disable the abs system. Antilock/traction control keeps your wheels from locking up and provides you with a more controlled stop, such as in rain or snow. Take it in to a repair facility and have them scan the abs system for fault codes codes

Oct 14, 2009 | 2005 Ford Explorer

1 Answer

05 Explorer. The ABS,ADVTRAC lights are on, & 4x4 high light flas


Disconnect the battery and try to reset the system to default. It may be a PCM issue.

Sep 13, 2009 | 2005 Ford Explorer

2 Answers

AdvTrac light remains on all the time and "check AdvTrac" message


You will have to retrieve and clear codes from VDM module with a scan tool. You may also have to calibrate it as well.

Jan 30, 2009 | 2005 Ford Explorer

Not finding what you are looking for?
2005 Ford Explorer Logo

Related Topics:

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...