Question about 2002 Chrysler Sebring

2 Answers

I have a chrysler sebring 02 / 2.7 6 cylinder that won't start and i did the compresion test and 1 cylinder is not firing

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

What about fuses? if u have burned "fuel/starter" fuse which is under the hood in fuse box (i guess 4th from the passenger side 20A) it might be a fuel motor but doesn't look as a starter problem. listen carefully when u turn ur key, if u hear a noise coming from the fuel motor somewhere form the under back seats. just my guess

Posted on May 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

**** with handsome boy

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What cylinder is #1 on a chrysler sebring 2.7 l V6


Here is a link to give you all Chrysler Firing Orders, it also shows you ththe cylinder #'s : http://www.aa1car.com/library/chrysler_firing_orders.htm

Jul 17, 2012 | 2005 Chrysler Sebring Convertible

1 Answer

I have a sebring 2004 v6 2.7 which is misfiring. put it a new coil and changed plug on cylinder that doesnt fire still no spark. im getting power all th way to the plug tested with volt meter.it reads 14...


Invalid test. When plug fires, the wire shoots around 40,000volts. When not firing, there is no current in the wire.
Try switching the misfiring plug wire with another that is firing. Switch them both at the plug and at the coil tower. If that was a bad plug wire, the misfire will now be on the cylinder where you put the suspect wire. This will confirm a bad plugwire.
Good luck.

Nov 25, 2011 | 2004 Chrysler Sebring

1 Answer

2002 chrysler sebring 2.7ltr timing mark diagram


the 02 sebring does not list a 2.7L it had 3 engine codes a 2.4L 4cylinder vin# G 2.4L 4 cylinder vin# B or X and a 3.0L V6 SOHC ? recheck what you have and get back with me.

Sep 29, 2011 | 2002 Chrysler Sebring

1 Answer

How do I properly replace my 2006 Chrysler Sebring ac condenser? Can I use a condenser from a 2004 Chrysler Sebring?


You can replace the condenser easy enough

You won't be able to recover the refrigerant when
you start,so right there your breaking EPA Laws

Then you won't have gauges or a vacuum pump,
so you can not even work on the A/C System
to test or charge it !!

Jul 18, 2011 | 2006 Chrysler Sebring

1 Answer

Need to know the firing order on a1998 chrysler 2.5 engine and the wireing order thanks


Front cylinders from left to right 1-3-5
Back cylinders from left to right 2-4-6

Firing order in this vehicle is actually 1-2-3-4-5-6

Aug 12, 2010 | 1998 Chrysler Sebring

1 Answer

Where is bank 1 02 sensor on a 2002 chrysler sebring 3.0L


its the on cylinder 1 manifold. closest 2 the passenger side firewall rite bhind the cubbyhole

Feb 13, 2010 | 2002 Chrysler Sebring

2 Answers

I need the firing order on a 1999 chrysler sebring lxi. i know its 123456 but i need a diagram on the engine


153624 on a six cylinder. This should be in cast on the intake manifold. To locate what tower to use on the cap, do this. pull the #1 plug. Bring it to tdc on the compression stroke. Now chk out where the rotor is pointing and that's the tower for #1. Good Luck -Ned-

Sep 16, 2009 | 1998 Chrysler Sebring

1 Answer

Self test for sebring 2002


there is no self test for a 02 . have it scaned at any auto zone or better yet take it to a shop

Jun 02, 2009 | 2002 Chrysler Sebring

1 Answer

Dead cylinders 2003 sebring


it sounds like you may have the wires on the wrong coil. It should be #1 on the #4 coil, and the #3 wire on the #2 coil. you probably have them backwards so 1 and 3 are firing on the exhaust stroke.
the firing order is 1-3-4-2.
they should be hooked like this.
82c8490.jpg

3ddfc56.jpg

Jan 23, 2009 | 2003 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...