Question about 1989 Ford Ranger

1 Answer

My 1989 ford ranger is spraying fuel out of the tailpipe. 2.9L V6 Any ideas

Posted by on

  • david_richer May 02, 2010

    The motor is tight on the truck,less than 50,000miles since rebuild. The fuel pump went and we replaced it recently,also replaced the fuel pressure regulator. Did a compression check and had 100psi in all cyliders. Put compessed air to all cylinders individually with each @ TDC and had no air out tailpipe,oil breather or upper intake.All injectors are clicking.Any other ideas?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 189 Answers

You have very bad problems here. fuel is getting out of the cylander walls where combustion should take place. this means a total rebuid,rehoning the cylander walls in the block,and possibly bigger pistns needed.
if your running okay,just try to keep the oil changed and run it till it wears out. sometimes you can get a few years like this.

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram of a fuse box for a 1989 ford ranger 2.9 v6


sometimes the diagram is located on / in the lid

Jun 09, 2015 | 1989 Ford Ranger

2 Answers

Location of fuel pump relay on 89 ford ranger 2.9 v6


It's powered by fuse #1 in the battery fuse box, so I would think it should be right there somewhere. If it isn't labeled, see if you can turn the box over to see where fuse #1 leads to.

65f4f64.gif

Oct 19, 2010 | 1989 Ford Ranger

1 Answer

I bought a 89 2.9L v6 ford ranger that had been sitting for two years. it started right up and i drove it around for three weeks but the it died suddenly while driving, i got it to start a couple of times...


i hope you changed all the fluids. New oil,coolent,trans. oil and draind all the old fuel. if not the fuel injecters need to be cleaned but first check to see if the crankshaft can be turned if you can you may save that engine.

Jul 07, 2010 | 1989 Ford Ranger

1 Answer

I need vaccuum diagrams for a 1988 ford ranger V6 2.9 liter


Fig. 19: Vacuum hose routing-1989 2.3L EFI engines; calibration 9-50K-R00

648d6e7.jpg


Fig. 20: Vacuum hose routing-1989 2.9L EFI engines; calibration 9-65F-R00

662725c.jpg

Hope this help (remember rated this).

Mar 24, 2010 | 1988 Ford Ranger

2 Answers

I have a 1989 ford ranger i am comeing up with a code 14


Code 14 is ignition pickup. Here is a part you can purchase : www.rockauto.com

Feb 04, 2010 | 1989 Ford Ranger

1 Answer

1989 Ford Ranger 2.9 liter 4x4 Runs Horrible


change fuel filter. add can of SEAFOAM(parts house) to fuel. It sounds like the beginning of EGS(ethanol gas syndrome). corn liquor substance, water, and clogging. all caused by ethanol fuel.

Sep 02, 2009 | 1989 Ford Ranger

1 Answer

My 89' ford ranger 2.3L idles fine stalls in gear a lot wont go up above 2k rpms when it isnt stalling


you have a restriction in your exhaust system. It might be the catylitic converter plugged or the muffler plugged. If not this check the tailpipe for pluggage.

Mar 23, 2009 | 1989 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...