Question about 1993 Ford Ranger SuperCab

1 Answer

How does the spring go in on replacing back brakes on 1993 ford r

My grandson is replaceing back brakes on 1993 ford ranger truck and can't get the springs in, how is this done ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

They make a brake spring installation tool. You can use vise grips, or hook the spring on a screwdriver and get the edge of the screwdriver abve the pin, and pry up, might take a couple tries.

Posted on May 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford mustang brake pedal goes down on its own and brakes


Check the vacuum brake booster and check valve maybe there is a problem there that is amplifying the vacuum inside the booster and applying the brakes. I hope this helps, let me know.

Aug 02, 2010 | 1993 Ford Mustang

1 Answer

Replacing brake cylinders


Not a tough task, remove the wheels and drums, and the brake shoes. now disconnect the brake line and the attaching bolts for the cylinder. Replace it and bleed the affected brake to rid air.

Mar 16, 2010 | 1993 Ford Ranger SuperCab

3 Answers

E-brake in 93 Ford Ranger doesn't work


The cables are probably stretched if you use it on a regular basis or seized if you are like me and never use it. Crawl under the truck on the driver's side, about 1/2 way to the back and find a steel cable running to the back wheels. Follow it down until it hooks up to 2 cables. Pull on the main cable by hand and watch to see if the other 2 move when you do that. Give it a good yank. If the 2 cables don't move they are seized and need to be replaced. If they move then the main cable is stretched.You can replace it or you can buy a tightener at the auto parts store. It's commonly refered to as a Chevy e-brake cable tightener. It just hooks on the cable and shortens it by tightening a nut on the J hook. You can use more than one if you need it. This would be easier and cheaper than replacing for now. Hope this helps.

Nov 03, 2009 | 1993 Ford Ranger SuperCab

2 Answers

I need a diagram for the rear drum brake for 2002 Ford Ranger


Copy and paste this into your search window: 2002 ford ranger rear brake diagram

You should see four pictures pop up, select the brake parts diagram or the brake picture.

Sep 03, 2009 | 1993 Ford F150 SuperCab

1 Answer

Brake and tail light blow fuse when headlights are on.


water /corosion damage to running lamp sockets

use contact cleaner and replace all running lamp bulbs(front-back)

use silicone to seal crack or gap allowing in water

Mar 11, 2009 | 1993 Ford Ranger SuperCab

2 Answers

1991 Ford Ranger w/ABS Rear brakes lockup


sounds like you need to replace the wheel cylinders also check brake shoes and adjust properly upon reassembly

Jan 30, 2009 | 1989 Ford Ranger

1 Answer

1993 FORD RANGER 4 WHEEL DRIVE


there is an actuator on the back of the transfer case that likes to fail odds are this is where your problem is. check power and ground here and if you have both replace the actuator

Nov 22, 2008 | 1993 Ford Ranger SuperCab

1 Answer

Front Brakes


Replace the brake pads, then sand the lines and spray them with undercoating. If you dont want to sand lines just spray the undercoating. They will last longer if you sand them. This is available at your local auto parts store

May 30, 2008 | 1993 Ford Ranger SuperCab

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...