Question about 1994 Ford F150 Styleside Supercab

1 Answer

How do you get the fan clutch to not move while you're trying to loosen the nut that takes it off? 94 F150 4.9 liter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You can use a chain strap tool to hold the pulley. They make a tool with a handle that bolts to the 2 of the 4 bolts on the pulley to hold it. I used a 2"X16"X1/8" thick steel and drilled 2 holes in it to line up with the holes on the pulley and bolted it to the pulley to hold on to.

Posted on May 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO REPLACE CLUTCH FAN


to remove clutch fan you need to remove upper fan shroud, you need large wrench to remove the fan clutch retaining nut to remove fan and clutch away from the engine drive belt should keep pulley from turning while loosen fan clutch retaining nut.if pulley belt turns while loosen fan clutch bolt remove drive belt use strap wrench hold pulley while you remove fan clutch bolt this procedure for checvrolet if you working on volkswagon you need spanner wrench hold the idler pulley while you use large wrench to loosen the large drive nut to fan clutch. you have to remove fan with clutch from engine then you can remove clutch from fan you can go to auto parts stores rent a spanner wrench try auto zone they rent out tools.

Jan 05, 2012 | Cars & Trucks

1 Answer

Trying to remove fan clutch,which way does it turn?


YOU NEED TO HOLD FAN CLUTCH WITH A CLUTCH TOOL THEN LOOSEN THE LARGE NUT RETAINING THE FAN AND CLUTCH ASSEMBLY REMOVE FAN TO CLUTCH BOLTS AND NUTS COUNTERCLOCK WISE.

Apr 01, 2011 | 2000 Chevrolet S-10

1 Answer

Need to take the fan off to replace the water pump. How is that done? Which way are the threads?


You didn't indicate what engine your Explorer is equipped with, so this is general information.

  • You will need this type of special tool set to hold the fan clutch, and loosen the nut.
  • The specification of fan clutch nut thread direction should be stamped into the fan shroud plastic near the hood latch.
  • You will most likely need to remove the air duct for clearance.
  • You may need to loosen, or remove the the fan shroud for clearance.

Feb 24, 2011 | 1998 Ford Explorer

2 Answers

How do you remove the fan from 1998 f150 4.2 liter


how do you remove the fan and fan clutch from 1998 f150 4.2 liter engine. i am trying to replace the water pump but i cannot get the fan to break loose . i cannot figure how to stop pump from turning while trying to loosen the bolt or nut that holds the fan clutch on the water pump shaft . is there a special tool to help me with this

Jul 15, 2010 | 1998 Ford F150 Regular Cab

2 Answers

How do i change my fan clutch on my 1994 dodge 250 5.2 liter


Rent a fan clutch removal tool from the parts house. Pull the whole unit out of the truck. There are 4 little bolts holding it on.

Jun 14, 2010 | 1994 Dodge Ram

1 Answer

How do you remove the fan clutch 1999 5.7 Liter?


use a wrench long enough to reach past the fan and use a hammer to impact it loose, also check if it is reverse treaded a lot of them are

Apr 28, 2010 | 1999 Chevrolet Silverado 1500

3 Answers

How to remove fan clutch on 94 Ranger 4.0?


THERE IS A SPECIAL TOOL THAT CAN BE RENTED OR PURCHASED AT YOUR LOCAL AUTO PARTS STORE. IT CONSISTS OF A LARGE OPEN END WRENCH AND A LONG FORK-LIKE TOOL THAT GRABS THE NUTS ON THE FAN SO THAT THE WRENCH CAN LOOSEN THE LARGE NUT THAT HOLDS THE FAN CLUTCH TO THE FAN. I HOPE THIS HELPS. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING. P.S. BE SURE TO LOOK AT THE NEW CLUTCH TO FIND OUT WHICH DIRECTION THE THREADS GO. SOME OF THESE ARE LEFTY TIGHTY, SOME ARE LEFTY LOOSEY. GOOD LUCK

Aug 22, 2009 | 1994 Ford Ranger Supercab

1 Answer

HOW TO REPLACE A POWERSTEERING BELT ON A 1997 ISUZU RODEO


If it is like a 94, the power steering belt is either middle or front, You might be able to sneak it past the fan, not sure, usually you have to take the fan off, Not the four bolts up front but the 3 bolts into the block holding the bracket. take the fan shroud out,2 srews/ bolts, and clips, getting the top radiator hose out of the way helps. Loosen the tension nut up front, and I believe you have a square hole for a half inch drive breaker bar, use it to move the pump left and right to loosen and tighten the belt. Then tighten the nut back up, put every back, you are all set. If the belt is in the middle, you have to take off the ac belt first. Loosen the tensioner on this belt, and wind it down, Then back up when you are done. Hope this helps.

Jan 26, 2009 | 1997 Isuzu Rodeo

2 Answers

Harmonic balancer for 1999 dodge ram 1500


well if i remember correctly that fan clutch is reverse threads so in other words to loosen it you'll have to turn your wrench clockwise. they do this cuz the rotation of the fan will tighten itself onto the water pump. anyway what i do is leave the serpentine belt on the the pulleys and that will kinda hold them steady whilst you put the "special" wrench on the clutch and pop it loose you'll prolly need a cheater bar to make things easier but not too much or you'll overcome the traction of the belt and it will just slip.

Jun 02, 2008 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...