Question about 2001 Isuzu Trooper

Open Question

2001 isuzu trooper. How to remove rear axle. - 2001 Isuzu Trooper

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
honeymokey
  • 3113 Answers

SOURCE: CV axle removal 1999 Isuzu Trooper

The easy way is to take the inner boot off and take the joint apart. Take new cv axle apart at inner joint and attach to the old one sticking out of axle housing. You will need to get new boot clamp.

Posted on Mar 06, 2010

Ad
  • 883 Answers

SOURCE: Rear Axle Removal

rate me solved...this is all I can find...

figure 1

d164665.jpg

figure 2
c12dde8.jpg

defeae4.jpg

Posted on Jun 27, 2008

germcelchar
  • 389 Answers

SOURCE: how do i remove cv axle for a 98 isuzu trooper

Go to my profile I have just explained how to change a cv boot on a Trooper. The axle needs to be taken out to change the boot so the same solution. What you call an axle I have refered to as a drive (short for driveshaft) It takes a lot of explaining so save me a lot of writing if you read the solution I gave for changing the CV boot. Cheer's

Posted on Sep 28, 2009

miket756
  • 2702 Answers

SOURCE: how can i replace my r/front axle c.v boot on my

this is a realy big job you need to strip out the 4 wheel drive hub just to get to the wheel bearings,,, not some thing for the novest to even try to do,,,best thing is to get a book on it first, after you have striped out the 4 wheel drive hub and took off the wheel bearings and disk (rotor) you still need to push the drive shaft through the hub and thats very hard as well, and you got to pop off top and bottom swivels,,,and finaly you can get to the rubber boot,,,,,all £3.50 of it!!!! but £250 just to get to it? try sticking a push bike patch over the split,,,its far easer and quicker

Posted on Nov 15, 2009

BCAS1298
  • 3092 Answers

SOURCE: Do I have to remove 4 bolts around axle to replace

Yes

Posted on Dec 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove cv axel on 01 isuzu trooper


You must remove the axle from the transmission in a straight out line from the case of the transmission in a quick and very hard snapping motion, a large heavy cast iron pipe wrench works well, but remember the axle can't be at an angle, it must be straight out within a few degrees.

Apr 27, 2012 | 2001 Isuzu Trooper

1 Answer

Leaking oil seals rear axil


hi , make sure its not the brake cyl. leaking, if its rear seal leaking remove brake shoes, then remove axle bolts, replace new seal, then check rear end fluid

Jun 16, 2010 | 1996 Isuzu Trooper

1 Answer

Trying to remove the rear axle to replace seal from a 2001 Isuzu Trooper. It doesnt want to come off..what do I do?


Remove bolts and get a slide axle puller, then take it to a machine shop all of the parts to fix it.

May 01, 2010 | 2001 Isuzu Trooper

1 Answer

CV axle removal 1999 Isuzu Trooper


The easy way is to take the inner boot off and take the joint apart. Take new cv axle apart at inner joint and attach to the old one sticking out of axle housing. You will need to get new boot clamp.

Mar 03, 2010 | 2003 Lincoln Town Car

1 Answer

How to check gear oil level in Isuzu trooper 2001


there will be a oil plug in the middle of your rear axle.

Dec 08, 2009 | 2001 Isuzu Trooper

1 Answer

Change a cv boot on a 1996 isuzu trooper


First their are two different front axles in 1996 troopers. Isuzu changed the 4wd system from auto lock hubs to drive control axle.auto lock hube are on the older trooper's with the light and wiper switches on the dash. The same way to change both. Auto hub remove the six hex. screws slide off the hub remove the sirclip from the driveshaft. Newer hub has 6 alan-head screw's again remove them then the hubcap then the sirclip on the shaft and slide off the round spacer. Next 4 bolts from the lower balljoint and the brake's. Pull out the hub until it clear's the shaft remove the inner boot clips slide the inner boot out the shaft. Clean the grease from the end of the axle then with your fingernail feel along any of the 3 tracks in the axle and near the outer end of the track you will find a wirelike split ring slide a screwdriver under the ring and lever it off . Pull out the drive clean off the grease. You will see a sirclip on the end of the joint remove it and slide off the joint. You can replace either boot from that end. The outer joint is held on with a snap ring on the shaft inside the joint and is not easily removed need a hammer and drift to drive off the end and when removed its hard to get the snap ring on the shaft back into its place.You can change both boots from this end as well. Cheers

Sep 28, 2009 | 1994 Isuzu Trooper

2 Answers

How do i remove cv axle for a 98 isuzu trooper


Go to my profile I have just explained how to change a cv boot on a Trooper. The axle needs to be taken out to change the boot so the same solution. What you call an axle I have refered to as a drive (short for driveshaft) It takes a lot of explaining so save me a lot of writing if you read the solution I gave for changing the CV boot. Cheer's

Sep 27, 2009 | 1998 Isuzu Trooper

1 Answer

Nut on rear axle,replacing seal


You force the nut of, and re-install with a new nut, or if still o.k use a puch to simulate the crimp, it is for locking the nut!

Aug 13, 2009 | 1988 Isuzu Trooper 2 Door

1 Answer

Removing half shaft from 2000 isuzu trooper


must remove clips from inside front axle housing!! If the cv joint aint broke DONT FIX IT the boots can be replaced in less than 1 hour with hand tools and the boot is around 20$ at any parts store

Mar 31, 2009 | 2000 Isuzu Trooper

Not finding what you are looking for?
2001 Isuzu Trooper Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...