Question about 2002 Saturn VUE

1 Answer

All power windows are not responding...fuse changed and still nothing...?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

RELay IS BAD

Try this website for resolving car problems by downloading a FREE service manual for your vehicle. This is not an owners manual but a factory mechcanic's manual.

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turned key in ignition got no responce tried connect to ecu unable to respond


With a voltmeter check out the main battery fuse cartridge located in the fuse box usually 3 or 4 of them bolted to fuse box you cant mistake them they are the largest physically in the fuse box , If this reads ok check your Battery Earth strap and Engine earth strap .sometimes the dash lights if these straps are poor but they can not carry enough power to complete circuit.

Jul 03, 2015 | Cars & Trucks

2 Answers

No hot wire to power right and left frt windows. relay or fuses ?????


I assume everything else works so start with the schematics and determine which fuse(s) and circuit(s) these power windows are on. Find the fuses. If these are OK, check wires for shorts, breaks and/or loose connections. If they are OK, check power window switches, then you'll probably have to deal with the window motors and connections.

Feb 17, 2014 | 1986 Ford Thunderbird

1 Answer

The windows on my crv wont work


at all stations?
all fuses, in both boxes. (did you read the operators guide to find them,
some cars have a circuit break (thermal) for windows,
and is located in the fuse box.
all this info is at alldata.com
ill look. ill respond , as you are a pro DIY person, can read schematics. if not , its just a guessing game.
IT IS a FUSE, not a breaker. but each motor in door has CB.
UNDER HOOD 40am Fuse #13
then fuse 23 underdash and fuse 8 same.
then the relay.same place.
and the relay is controlled by, master station (drivers)
the driver location doesnt need the relay to work.
the relay feeds power to all other window controls
so the master station is unique.
log in to alldata.com and see the pages on power windows.
here are some tid bits.
battery pull warning

Resetting the power window control unit is required after performing the following procedures: Disconnecting the battery, Removing the No. 6 (7.5 A) and/or the No. 23 (20 A) fuses from the under-dash fuse/relay box or disconnecting the driver's door wire harness.
and
window relearn/reset.
Control Unit Reset
  1. Turn the ignition switch ON (II).
  2. Move the driver's window all the way down by holding the driver's switch firmly down; when the window reaches the bottom, hold the driver's window switch firmly down for 2 seconds.
  3. Move the driver's window all the way up by holding the driver's switch firmly up; when the window reaches the top, hold the driver's window switch firmly up for 2 seconds.
  4. If the window does not work in AUTO, turn the ignition switch OFF and repeat the procedure.
  5. Check the window and power door lock operations

Jan 12, 2014 | 2006 Honda CR-V

1 Answer

Multiple problems with oldsmobile 2001 aurora


I agree with the body control module. They are troublesome on Auroras!

Sep 21, 2012 | 2001 Oldsmobile Aurora

1 Answer

2000 Toyota Corolla, \r\nMy power windows are working slow; sometimes not responding to inputs. Window goes up half way and stops. They work intermittedly. What's the problem?


Your power window motor's are getting weak, time for replacement, sooner or later will blow fuse to window motor's, due to motor's are asking for to many amps to work, will over load circit and blow fuse.

Aug 24, 2010 | 2000 Toyota Corolla

1 Answer

We have a '94 XJ6, I get nothing from a run>>>start.


there are 2 connections on the bulkhead/firewall. There is one on
each side.The connectors are brass and the insulators are
plastic with a rubber boot. unless these connections are clean you may get all sorts of malfunctions with switches,lights and electric
motors. Symptoms are similar to a failing battery, something to start with..

good luck

.

Apr 01, 2010 | 1994 Jaguar XJ6

1 Answer

Where is the power window relay on a 1991 toyota camry? i changed the power window cluster and a blown fuse, still nothing. only thing i can think of is the relay, but i dont know where it is.


a relay is not going to blow the fuse. it is just basically a switch, from which a large load is controlled by a smaller load. the most likely reason that it blows a fuse is the window motor itself is shorted. replace this

Feb 21, 2010 | 1991 Toyota Camry

1 Answer

No power to left drivers door


it is likely a relay in the fuse panel under the dash. feel the tops of them as you have someone try the power locks or windows if that is not working. the relay should click or become very hot.

Sep 17, 2009 | 2003 GMC Sierra

1 Answer

1998 Windstar power windows not working


Good Evening!


on your model vehicle it is most common for the MLP or manual ever position sensor (sometimes called a neutral safety switch) to malfunction and not allow certain accesories work..such as your RADIO or POWER WINDOWS. i would check the connections @ the MLP and if green...hope this helps you

ps your 4 thumbs up is appreciated!

Aug 12, 2009 | 1999 Ford Windstar

1 Answer

My power windows stop working in my Chrysler 300m I changed the f


Then go to the power window switch, and after that the window motor itself.

Jul 25, 2009 | 2001 Chrysler 300M

Not finding what you are looking for?
2002 Saturn VUE Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...