Question about 1997 Dodge Intrepid
Purchase a set of custom fit spark plug wires. Remove the wires one at a time and just reinstall the new one of the correct length. Do not remove them all or you will get mixed up. Here is a diagram. The 3.3 & 3.5 liter engines have identical setups.
Posted on May 01, 2010
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 13, 2015 | Acura Cars & Trucks
Nov 16, 2014 | 1996 Dodge Ram 1500 Club Cab
Jun 17, 2013 | 2003 Hummer H2
Apr 01, 2013 | 2004 Buick LeSabre Custom
Jun 24, 2012 | 1999 Honda CR-V
1. Pull the hood release lever located under the dashboard.
2. Walk around to the front of the car, reach under the hood, find the latch and squeeze it. Open the hood.
3. Find the spark plugs, located in a row along one side of the engine (on an in-line four-cylinder engine) and attached to thick wires, called spark plug wires. Cars with V-shaped engines (which can have four, six or eight cylinders) will have spark plugs and spark plug wires on both sides of the engine.
4. Change one spark plug at a time, always putting the plug wire back on before changing the next spark plug.
5. Pull off one spark plug wire where it attaches to the plug. There is a little rubber boot at the plug end of the wire; pull on this part. Pulling higher up on the wire can damage the spark plug wire and cause it to separate.
6. Blow or wipe away any dirt or debris around the spark plug. You do not want anything to fall into the cylinder while the spark plug is out.
7. With the spark plug socket and a ratchet, remove the spark plug by turning it in a counterclockwise direction. You may need an extension for your ratchet if the spark plugs are deep-set or not directly accessible. Ratchets with flexible heads are especially helpful for hard-to-reach spark plugs.
8. Check the spark plug to make sure it needs replacing. A good spark plug should be lightly coated with greyish brown deposits. If heavy deposits are present, if the spark plug is black or if the electrode or core nose are damaged, the plug needs to be replaced.
Video - www.carbasics.co.uk - look in the 'how to' section.
Hope this is of help
Nov 28, 2010 | 2001 Dodge Stratus
Jun 30, 2010 | 2002 GMC Yukon Denali
May 29, 2010 | 2001 Chevrolet Blazer
Sep 15, 2009 | 2004 GMC Envoy
May 25, 2009 | 1999 Chevrolet Camaro
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: