Question about 2008 Pontiac G6
Try this website to download a free manual
Posted on May 01, 2010
Remove battery connections to disable the airbags. Slide the seat all the forward. Use a t50 torx to remove the seat belt connected at the side of the seat, and to remove the 2 bolts holding the rails down at the back. Pivot the seat forward, unplug wire connections. Remove the seat.
Posted on Apr 06, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1. Take off the head rest. 2. slide seat forward until the 2 rear bolts are exposed on the track 3. Remove bolts 4. the seat that lifts out like a van seat. you need to tilt it forward then pull it up and back and it will come out. then maneuver it out of the door.
Posted on Aug 20, 2010
Its unlikely the belt is locked, most likly the belt is twisted down inside the gear which locks up the gears. By law a shop is not supposed to work on seat belts, they are supposed to replace them. If your brave enough try to peel back the plastic housing where the belt goes down into the main unit. If you see the belt twisted sometimes you can use a small screw drivers to release the latch and pull the belt out. Otherwise you'll need to order a replacement belt & have it replaced.
Posted on Jul 09, 2009
Tips for a great answer:
Jun 22, 2016 | 2006 Pontiac G6
Jun 22, 2015 | Pontiac Cars & Trucks
Jun 02, 2015 | 2008 Pontiac G6 Sedan
Apr 18, 2015 | 2007 Pontiac G6
Mar 22, 2014 | 2007 Pontiac G6
Sep 17, 2010 | 2007 Pontiac G6 GT Convertible
Jan 11, 2010 | 2009 Pontiac G6
Dec 17, 2008 | 2006 Pontiac G6
3,493 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: