Question about 2004 Chrysler Sebring

1 Answer

Replacing alternator cant figure out how to remove the belt

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Try this website to download a free manual



http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you remove belt when removing alternator


Hi:

To remove the belt, you must loosen the belt tensioner pretty far.
It is located up near the front of the engine, not far from the air conditioning compressor. It has a 10mm bolt that must be loosened, and that will allow the belt to be removed. After the Alternator is replaced, tighten the belt back up, and start the car , shut it back down and adjust the belt as needed.

Mar 22, 2014 | 1998 Honda Civic

1 Answer

How to remove belts from 1994 dodge caravan 2.5 liter


Drive Belts

Print


INSPECTION

See Figures 1, 2, 3, 4 and 5
Check the condition and tension of all drive belts every 12,000 miles, or at least once a year. Loose drive belts can lead to poor engine cooling and diminished alternator, power steering pump, air conditioning compressor, or emission air pump output. A belt that is too tight places a strain on the bearings in the driven component.


0900c15280215ae4.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: There are typically 3 types of accessory drive belts found on vehicles today


0900c15280215ae5.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: An example of a healthy drive belt


0900c15280215ae6.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Deep cracks in this belt will cause flex, building up heat that will eventually lead to belt failure


0900c15280215ae7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: The cover of this belt is worn, exposing the critical reinforcing cords to excessive wear


0900c15280215ae8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: Installing too wide a belt can result in serious belt wear and/or breakage
Replace any drive belt that is glazed, worn, cracked, or stretched to the point where correct adjustment tension is impossible. If two belts are used to drive a component, always replace both belts when replacement is necessary. After installing a new belt, run the engine for ten minutes, shut OFF the engine and recheck the belt tension. Readjust if necessary.


ADJUSTMENT

See Figures 6, 7, 8, 9 and 10


0900c15280215ae9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: Engine belt tension chart-2.2L engines


0900c15280215aea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Engine belt tension chart-1987-89 2.5L engines


0900c15280215aeb.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 8: Engine belt tension chart-2.6L engines


0900c15280215aec.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 9: Engine belt tension chart-1990-93 models


0900c15280215aed.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 10: Engine belt tension chart-1994-95 models
Two popular methods of checking drive belt adjustment are; the Belt Tension Gauge Method and the Belt Deflection Method. The former requires a special gauge and the latter requires a straight edge and scale or just a good eye for measurement. The deflection method will be used in the following belt replacement instructions. A rule of thumb for checking belt tension by the deflection method is to determine the midpoint between two pulleys of the drive belt and press down at that point with moderate thumb pressure. The belt should deflect to the measurement indicated in the following installation procedures. Adjustment is necessary if the belt is either too loose or too tight.

WARNING A belt adjustment which is either too loose or too tight will eventually damage the accessory that belt is driving. A too loose adjustment allows free-play in the belt which could transfer a whipping motion or shock to the accessory drive pulley. Similarly, a belt which is too tight will preload the accessory bearings, leading to early failure.


REMOVAL & INSTALLATION

See Figure 11
Raise the front of the vehicle, support on jackstands and remove the lower splash shield if access is hampered due to space limitations when changing drive belts.


0900c15280215aee.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 11: Support the vehicle, then remove the lower right side splash shield for access to the drive belts
2.2L Engines
A/C COMPRESSOR DRIVE BELT
See Figures 12, 13 and 14


0900c15280215aef.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 12: A/C compressor drive belt adjusting points-2.2L engines


0900c15280215af0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 13: Loosening the locking screws for A/C compressor drive belt removal


0900c15280215af1.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 14: Removing the A/C compressor drive belt from under the vehicle

  1. Loosen the idler pulley bracket pivot screw and the locking screw.
  2. Remove the belt and install a replacement.
  3. Using a breaker bar and socket apply torque to the welded nut provided on the mounted bracket to obtain proper tension.
  4. Tighten the locking screw first, followed by pivot screw. Tighten to 40 ft. lbs. (55 Nm).

ALTERNATOR DRIVE BELT (CHRYSLER TYPE)
See Figures 15 and 16


0900c15280215af2.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 15: Alternator belt adjustment-2.2L engine


0900c15280215af3.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 16: Loosening the locking screw for alternator drive belt removal
If removal of the alternator belt is required, the A/C belt must first be removed.

  1. Loosen the pivot nut, locking screw, and the adjusting screw.
  2. Remove the belt and install a replacement.
  3. Adjust to specification by tightening the adjusting screw.
  4. Tighten the locking screw to 25 ft. lbs. (34 Nm).
  5. Tighten the pivot nut to 30 ft. lbs. (41 Nm).

ALTERNATOR DRIVE BELT (BOSCH TYPE)
If removal of the alternator belt is required, the A/C belt must first be removed.
  1. Loosen the pivot nut, locking nut, and adjusting screw.
  2. Remove the belt and install a replacement.
  3. Adjust to specification by tightening the adjusting screw.
  4. Tighten the locking nut to 25 ft. lbs. (34 Nm).
  5. Tighten the pivot nut to 30 ft. lbs. (41 Nm).

POWER STEERING BELT
If removal of the power steering belt is required, the A/C and alternator belts must first be removed.
  1. Loosen the locking screw, and pivot screw.
  2. Remove the belt and install a replacement.
  3. Install a 1 / 2 in. breaker bar into the pump bracket slot, apply pressure with the breaker bar and adjust the belt to specification.
  4. Tighten the locking screw first, then the pivot screw. Tighten to 40 ft. lbs. (55 Nm).

AIR PUMP DRIVE BELT
See Figure 17


0900c15280215af5.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 17: Air pump belt adjustment-2.2L engines
When servicing the air pump, use the square holes provided in the pulley to prevent camshaft rotation.

  1. Remove the nuts and bolts retaining the drive pulley cover.
  2. Remove the locking bolt and pivot bolt from the pump bracket, then remove the pump.
  3. Remove the belt and install a replacement.
  4. Position the pump, then install the locking bolt and pivot bolt finger-tight.
  5. Install a 1 / 2 in. breaker bar into the bracket assembly (block the drive pulley to prevent camshaft rotation), and adjust the belt to specification.
  6. Tighten locking bolt and pivot bolt to 25 ft. lbs. (35 Nm).

2.5L Engines
AIR CONDITIONING COMPRESSOR
See Figure 18


0900c15280215af8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 18: Drive belt adjustment points-2.5L engines

  1. Loosen the idler bracket pivot screw and the locking screws to replace, or adjust belt.
  2. Remove the belt and install a replacement.
  3. Adjust the belt to specification by applying torque to weld nut on the idler bracket.
  4. Tighten locking screw first, followed by the pivot screw. Tighten to 40 ft. lbs. (55 Nm).

ALTERNATOR BELT
See Figure 18
If replacement of the alternator belt is required, the A/C drive belt must first be removed.
  1. Loosen the pivot nut, locking nut, and adjusting screw.
  2. Remove the belt and install a replacement.
  3. Adjust the belt to specification by tightening the adjusting screw.
  4. Tighten the locking nut to 25 ft. lbs. (35 Nm).
  5. Tighten the pivot nut to 30 ft. lbs. (40 Nm).

POWER STEERING PUMP
See Figure 18
If replacement of the power steering belt is required, the A/C and alternator belts must first be remove.
  1. Loosen the locking screw and pivot screw to replace, or adjust the belt.
  2. Remove the belt and install a replacement.
  3. Using a 1 / 2 in. breaker bar positioned in adjusting bracket slot, adjust the belt to specification.
  4. Tighten the locking screw followed by the pivot screw. Tighten to 40 ft. lbs. (55 Nm).

2.6L Engines
ALTERNATOR/AIR CONDITIONING COMPRESSOR BELT
See Figure 19


0900c15280215af9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 19: Drive belt adjustment points-2.6L engines

  1. Loosen the locking screw, jam nut, and pivot nut.
  2. Loosen the adjusting screw.
  3. Remove the belt and install a replacement.
  4. Adjust the belt to specification by tightening the adjusting screw.
  5. Tighten the locking screw followed by the pivot nut. Tighten to 16 ft. lbs. (22 Nm).
  6. Tighten the jam nut to 21 ft. lbs. (28 Nm).

POWER STEERING PUMP BELT
See Figure 19
If replacement of the power steering belt is required, the alternator and A/C belt must first be remove.
  1. Loosen the pivot screw, and the locking screw.
  2. Remove the timing pickup.
  3. Remove the belt and install a replacement.
  4. Install a 1 / 2 in. breaker bar in the adjusting bracket slot, torque to specification.
  5. Tighten the locking screw, followed by the pivot screw. Tighten to 40 ft. lbs. (55 Nm).
  6. Install the timing pick-up, and tighten to 160 inch lbs. (18 Nm).

Jul 26, 2012 | 1994 Dodge Grand Caravan

1 Answer

Porsche boxster alternator belt


some porsches adjust belt tension by adding or removing shims between the two pulley halfs.take the nut off the pulley insert the belt put thebelt,outer pulley and nut back on.

Jul 05, 2009 | 2001 Porsche Boxster

1 Answer

Alternator belt


The other belt has a tensioner and is located under the ac compressor. It takes a 8mm bolt to loosen it.

Apr 22, 2009 | 1998 Nissan Sentra

1 Answer

Alternator belt fell off


You may have to buy a new belt because that one may have stretches. After you buy a new belt. Look at he alternator, it has two screws, one hold it in place and the other allow it ti move. Lose both a little. With a pry bar push the alternator so the belt can fit. Look for the belt routing diagram in the engine compartment. Follow it and put the belt on. You were suppose to have a belt tension tool to determine the tension. Then use your pry bar to move the alternator to position and tension then tightened alternator screws.

Mar 13, 2009 | 1998 Mazda 626

1 Answer

How do i remove the alternator from a 97 saab 900


You do not have to remove the wheel unless you have th 6 cylinder engine (2.3l). Then yes you do:

Disconnect Negative Battery Cable
Remove the air cleaner and hose from between the air breather/cleaner and throttle housing
Relax the belt tensioner off the belt and pry off the belt
Remove the right front wheel, black belt cover/protector, and the wheel hub nut and slide the hub off the drive shaft/outer Cv joint
Disconnect the alternator, remove the alternator/air intake hose, 2 bolts that hold the alternator in and remove it through right-hand wheel housing.

Yes, this is immensely annoying. I hope you figured it out...

Mar 03, 2009 | 1997 Saab 900

2 Answers

Replacing the alternator belt on 2001 kia spectra


Then you don't take anything off. There will be a spring loaded idler that tensions the serpentine belt. Take a socket or long 12 point wrench and attach to the center bolt of the tensioner, then rotate the idler wheel away from the belt, take the belt off. Slowly release the spring tension of the idler.
The 2nd belt should be set up the same way.

Jan 23, 2009 | 2001 Kia Spectra

3 Answers

Can't fint out how to change belts


The alternator and power steering belt should have been removed first, but here is the way to get it off. The belt, the idler is adjustable - loosen locknut on the small pulley above the alternator, at top left of alternator, The bolt on the outside of pulley, behind the pulley top left, is an adjuster bolt, turn til you can slide belt off easily; hoped this helped

Sep 26, 2008 | 2002 Dodge Intrepid

1 Answer

Changing out the alternator


actually some of this tensioners have a square hole, just insert a ratchet and holld it to one way until belt removed, then do the same with the installation, if not square hole then some have like a 18 metric nut to turn with a wrench

Jun 14, 2008 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2004 Chrysler Sebring Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...