Question about 2006 Chevrolet Malibu Maxx

1 Answer

Front brakes stuck, the pads and rotors is overheathin

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

The problem is a stuck piston in the caliper

Try this website to download a free manual



http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

Posted on May 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver's side front brake became suddenly stuck ( and mildly smoking) on my 1991 ford aerostar xl that has been excellently maintained. The 'Rear Anti-Lock' brake light came on yesterday and stayed on, and...


yes baby it to him and replace both calipers and rotors as they will work better with your new brake pads. Do Not Do a half a job when it comes to brakes. its your family you are dealing with. calipers are cheap rotors are cheaper and pads are also cheap. its 3 hours labour to do a complete front brake job and rear brakes take 2 hours. with new shoes turn drums replace wheel cylinders and new rear brake hardware price in Canadian for front brakes under 400 price for rear under 250 American parts prices slightly different but labour times the same

Sep 18, 2013 | Ford Aerostar Cars & Trucks

2 Answers

My brakes sound like they are grinding


check rear rotors and front rotors for rust buildup (flahlight helps). does the vehicle shake when you come to a hard stop? You will either need to have a front or rear or both brake job (rotors cut or replaced and new brake pads) If the vehicle is shaking when coming to a stop, its probably your front pads. If your hearing the noise from the rear its the rear pads or it you hear it from the front its the front pads. If there significant rust build up or your pads are low a brake job is recommended.

May 04, 2011 | 2008 Nissan Armada

1 Answer

Brake petal goes all the way to the floor no leaks antwhere front passenger pad stuck closed on rotor front passenger rotor pad bolts very hot after driving


the bolts are getting really hot because the friction of the pads running on the rotor the whole time whilst driving.
the pedal problem could be a few things but the most likely is either that the brake fluid needs replacing because it's got water in it,
there's air in the lines or the brakes master cylinder seals need replacing due to age.

Apr 14, 2011 | 2000 Dodge Caravan

4 Answers

Steering wheel shakes at high speed when brakes are applied


This is caused by the front disk brake rotors being warped from heat and running out of true, the wobble of the warped rotors causes the wheel to shake when you apply the brakes, it is worse the higher the speed you apply them at. Have the front rotors machined flat again or just replace them.

Mar 16, 2011 | 1998 Toyota Camry

2 Answers

My brakes are scrubbing and antilock light comes on, also when ever i back up, my front left wheel makes a very loud noise. kind of like rubbing metal. whats wrong?


the noise is probably the ware sensors on the brake pads making noise the noise lets you know that the brakes are getting thin are are ready to be replaced.if you let this go to long you can damage the brake rotors, make sure you check to make sure the caliper is not sticking on the left side being this side is making more noise ,a stuck caliper can cause premature brake pads ware .

Mar 05, 2011 | 1997 Chevrolet Lumina

1 Answer

How can I change the rotors and brakes on a 2006 Cadillac?


Front brake
Step 1: Identify Front Disc Brake Components
brake_pads_rotor.jpg
Front Wheel Drive Brake Assembly
Most front disc brake components include: brake rotor, brake pads, brake caliper, caliper mount and brake flex hose. Brake service usual occurs between 20,000 and 40,000 miles depending on driver habits, road conditions and brake pad/ rotor materials used.
Step 2: Remove Brake Caliper to Replace Pads
brake_pad_set.jpg
Removing Brake Caliper Mounting Bolts
Locate primary caliper mounting bolts; apply wrench pressure counter-clockwise (When looking at the head of the bolt) to remove the bolts, upper and lower. Make sure the bolt threads are in good shape and replace if necessary.
Step 3: Remove Front Brake Caliper
remove_brake_caliper.jpg
Remove Front Brake Caliper
After removing the primary caliper mounting bolts lift the brake caliper off of the rotor and then tie or secure to the side, being careful not to bend or kink the brake caliper flex hose. Thoroughly inspect brake caliper and brake hoses for leakage, cracks or chaffing and replace as needed. Next remove the brake pads (If not mounted in the caliper) and secondary caliper mounting bolts. Notice how great protective gloves work, most technicians use them on the job today.
Step 4: Remove Brake Pads
remove_brake_pads.jpg
Remove Front Brake Pads
Once the brake pads have been removed, make sure if there is anti rattle hardware to transfer to the new brake pads. Some brake pad manufacturers will include the proper lube (Caliper slides) and anti-rattle hardware to ensure proper performance of their product.
Step 5: Remove Caliper Mount
remove_brake_pads_holder.jpg
Remove Caliper Mount Bracket
Finish removing secondary caliper mount bolts and remove caliper mount. Note: clean and lube caliper slides and pad friction surfaces of all foreign material or build-up.
Step 6: Remove Brake Rotor
brake_rotor.jpg
Remove Brake Rotor
With the caliper mount out of the way you can now remove the brake rotor. Sometimes it can get stuck so you may need to tap it with a hammer or use penetrating oil to free it up. Some manufacturers use small screws to hold the rotor on as well. Clean and inspect wheel studs, replace if any are damaged. Also clean bearing hub rotor mount surface to ensure the proper mounting of the new brake rotor. Inspect the ABS sensor wheel for cracks or damage and replace as needed.
Step 7: Depressing the Brake Caliper
compress_caliper.jpg
Resetting Brake Caliper
To install the new brake pads you must retract the brake caliper piston. Remove the master cylinder lid or open the brake caliper bleeder screw to allow excess brake fluid to be released if necessary. Install C clamp tool and gently tighten clamp until caliper piston is fully depressed. Note: use old brake pad to protect the caliper piston. Close the bleeders once the piston is retracted completely
Step 8: Installing New Brake Rotor
new_brake_rotor.jpg
Install Brake Rotor
Install new brake rotor, the new rotor is manufactured with a protective film over the rotor to keep it from rusting, remove protective film with brake cleaner before installing; also after the brake job is complete you may experience a small amount of smoke from the rotor when first used. This is normal and will go away after the first couple of uses.
Step 9: Installing New Front Brake Pads
new_brake_pads.jpg
Installing New Brake Pads
Reinstall the front brake caliper mount, and then install front brake pads. Make sure the pads are seated properly in the caliper mount; it must be a close fit to work properly..
Step 10: Reinstall Front Brake Caliper
front_brake_rotor_pads.jpg
Re-Install front Bake Caliper
Reinstall front brake caliper and reinstall caliper-mounting bolts, recheck all mounts and mounting bolts. Check the caliper slides to be sure there is no bind and that the caliper moves freely back and forth on the caliper slides. Bleed brake system per manufacturer's specifications to relieve any air trapped in the system. Before driving the vehicle, push the brake pedal down and let it up slowly, repeat until normal brake pedal operation resumes, this operation is forcing the brake pads to travel to the brake rotors.

Dec 18, 2010 | 2006 Cadillac STS

1 Answer

How to change my front rotors


To change the rotors you will need to first remove the wheels, then remove the brake caliper and brake pads. Next, you will need to remove the caliper mounting bracket. Once you have done this, the rotors should just pull off. If they still seem stuck you can try tapping on them with a wrench as they may be stuck on the hub do the brake heat and pressure over time.

May 29, 2010 | 1995 Honda Accord

1 Answer

Can your rear brake calipers get stuck and both have to be replaced with the rotors too?


they will stick just like the front ones if bad. and for the rotors the only time they need changed is if they are scored or have deep ridges in them, from worn down brake pads, when brake pads wear down to the metal backing plate, they will leave a ridge in rotors. or deep grooves. change rotors if they are bad.

Apr 22, 2010 | 1998 Ford Taurus

1 Answer

Grinding noise


your front brake pads may be metal to metal (worn out) or there is a small rock stuck in the rotor area, onluy way to know is pull the front wheels off and inspect the brake pads and the rotors

Mar 23, 2010 | 2000 Suzuki Grand Vitara

4 Answers

Brakes and rotors making noise


Were metallic brake pads installed? If they were and are hidhly aggressive, yes. Give them a few miles to smooth out.

Jul 29, 2009 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
Cars & Trucks Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...