Question about 1994 Toyota Pickup

2 Answers

Can I get and install seat belts?

The seat belts are very worn and I would like to replace them. Where do I get them and can I install them myself?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Yes you can install them yourself. You can buy from the dealer or From a wrecking yard. If you buy from a wrecking yard make sure the belts are in good condition. Make sure there is no tears or mold on the belt itself and f it has the retractable belts you will have to remove it as well as the Post bolt on the side by the door. To remove it you will have to remove the plastic cap off of the bolt thats connected to the door then using a York wrench turn the bolt counter clock wise. next pull the floor bolt out holding the reel on, depending if it has the real in the floor or on the inner part of the door post will determine how to get to it. if the roller is inside the post then you will have to unsnap the plastic cover off the door jam. For the seat belt on the inside driver side you will have to remove the bolt that holds the snap in it's place. hope this helps.

Posted on May 01, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

The very best place to find seat belts at a good price is at a salvage yard. Yes you can install them yourself. They simple bolt in. Of course you have to remove some trim pieces to get to the bolts. If you want new belts then there are many places that sell them. http://www.seatbeltcity.com/?gclid=COSf-fi8saECFQEbswodCikcBA
http://www.gotbelts.com/

http://www.car-stuff.com/store/?D=seat+belt&Ntt=seat+belt&Dx=mode+matchallpartial&Ntk=Main&Ntx=mode+matchallpartial&N=1725+4294963744&Nty=1

Posted on May 01, 2010

Testimonial: "Thank you very much!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace rear-left seat belt?


un do the bolts that hold the seat belt rewinder
take out the back seat and then undo the bolt that holds seat belt to floor of car then install whole replacement seat belt unit inset and retighten the bolts.
http://www.carparts.com/toyota/camry/seat-belt

Oct 13, 2015 | 2009 Toyota Camry LE

1 Answer

Toyota Echo 2003 SRS light with ABS light blinking instead of Seat Belt Light


When you sit in the seat and put the seat belt on does everything work ok . If so look to the fact that you are required to wear a seat belt and the fact that you are not might be the problem.

Mar 09, 2014 | Cars & Trucks

2 Answers

2008 Ford Escape front passenger seat belt is completely locked up and won't extend. How do I fix this?


the seat belt mechanism could be getting worn out. usually you would have to replace the seat belt retractor but try some WD-40 and see if that helps

Nov 11, 2013 | 2008 Ford Escape

1 Answer

Seat belt pretentioner chevrolet colorado 2005


If the air bag light is on this is how I fixed it it was a broken wire going to the seat belt in the driver side rear door in my ext cab truck there is a black rubber flex where the wires run from the body to the door. If u pull on the rubber flex from the body and the door you should see wires on both side of the flex pull on the wires one at a time mine was broken in the middle of the flex then I pulled a new Wire in the flex and spliced it at both ends

Jan 05, 2013 | 2005 Chevrolet Colorado

1 Answer

Driver side seat belt retractor broke. how to fix?


yes you can. I suggest you go to the scrapyard and purchase one there. they are easy to replace and inexpensive.

Jul 09, 2010 | 1994 Toyota Corolla

1 Answer

Can I replace my seat belt myself or do I need a professional?


You might be ablr to find a relplacement part but if you go to the dealer for it I doubt they will sell it to you. And yes, special tools are required!

Oct 12, 2009 | 2001 Volkswagen Jetta TDI

1 Answer

1996 chevy pick up seat belt onpassenger side is


May have folded when recoiling. You won't really know if it can be fixed until you see whats the matter with it. My advice is remove it pull the belt until it stops examine the belt if it is folded you should be able to correct it. If their is a problem with the mecanism then you would be better to replace is. These things are sensitive and it's probably just worn out.

Aug 21, 2009 | 1996 Chevrolet K1500

1 Answer

How do you relace an alternator belt on 1998 chevy tracker?


A year is not a good sign. The belt should not have come off in that span of time. I would make sure you do not have a worn out idler or tensioner pulley bearing before installing your new belt or reinstalling the original if it is not worn or damaged.

You will find one or two small pulleys involved with drive belt. One of the smaller pulleys will be an "idler" pulley and simply redirects the belt to a different accessory. The other small pulley is considered a "tensioner" pulley, it is spring loaded and keeps the correct tension on the accessory belt.
The tensioner pulley will have a "squared" hole in the bracket or a bolt through the center of the pulley. In either case you will use a wrench to pry the tensioner pulley arm in the direction that loosens the belt. Once tension is relieved, pull the belt off a pulley and remove the belt. You will reverse the process to install the new belt.
Good luck and let me know.
Regards,

Apr 07, 2009 | 1998 Chevrolet Tracker

2 Answers

1999 Dodge 2500 passenger side seat belt wont release


so after completely tearing the seat apart I found 2 wires going up to the seat belt mechanism from under the seat, these wires got caught in the seat mechanism underneath and were shredded. There must be a small solenoid inside the seat belt mechanism because I could hear it click after I repaired the wires(this circuit is live even with the ignition off) Im not sure how it all works but this solved my problem.

May 21, 2008 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
1994 Toyota Pickup Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...