Question about 2003 Nissan Se R

1 Answer

Malfunction indicator stayin on - 2003 Nissan Se R

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 34 Answers

It could be any number of things. There are over 100 different things that could set the code some minor some major. As long as it is not blinking on and off repeatedly it should be ok to drive it. Bring it to the nearest Autozone and they will scan the code for you for free. Unless you live in Ca. then your screwed thanks to the class action lawsuit in the state forbidding parts stores from reading or clearing codes. In which case you just have to bite the bullet and either buy a scanner and read the code yourself or take it somewhere to have the code read. I miss the good old days when you could just cycle the key a few times and the car would flash the code on the check engine light. I know that in my neck of the woods you can buy one for $40-50 which is much cheaper than paying an hour of diag at the dealer.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 wrench light is on


Powertrain Malfunction (Wrench) Warning Indicator (base instrument cluster)
The instrument cluster receives the powertrain status from the PCM over the high speed CAN. When a powertrain system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the powertrain malfunction (wrench) warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the 4WD control module sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator. On 4.6L engines, if the transmission control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator.
better have it checked !
Bett

Sep 10, 2016 | 2006 Mercury Mountaineer AWD

1 Answer

I cant find the answer u just gave me about my ford luxury stka light staying on in the dashboardd


I answered another person about their alternator lite stayin on even after purchasing new alternator and battery...I told him to re-chek all electrical connections and also sometimes another indicator bulb could be burned out in ur dash n that loose voltage can wander over to the next closet indictor lite n make it glow...

Nov 27, 2013 | 2008 Ford Explorer 2WD

1 Answer

Caravan malfunction indicator light


2014 dodge caravan dash tail light indicator stays on. Is there a problem

Jul 10, 2013 | Dodge Cars & Trucks

1 Answer

Lights stayin on


need to check the alternator if it is work properly. the battery is just drain when this unit not working. and the light indicator always on. comes off only on a new battery for a few hours.

Aug 14, 2012 | 2002 Jeep Liberty

2 Answers

On my 99 taurus I have two problems.first the fuel gauge isn't reading accurately,it stayin at 3/8 full.along with that gauge the temp gauge isn't moving it stays at cold.second major problem it...


You might have to get the fuel pump out of the tank and clean the patenchio meter which moves up and down, clean it with an eraser on the end of the pencil for best results.
As for the temp guage, check the temp sensor it might have grounded.
Strange whining could be from the loose belt check tensioner, power steering pump for pressure, sterring rack might be seasing/leaking internally.

Aug 19, 2011 | 1999 Ford Taurus

2 Answers

Engine malfunction indicator is on


The first thing I usually do when seeing a malfunction indicator light on, is to have it scanned with an OBD-II scanner available from Sears, Walmart, or a local auto parts store such as Autozone or Advance Auto Parts. Some auto parts stores will scan it for free.

Jan 08, 2011 | 1999 Acura TL

1 Answer

Explain the term "Malfunction on gas related system". My elantra indicating light came on indicating a malfunction. Please explain.


malfunction means " fail to function properly" in other words it is not working properly......hope this helps....cheers

Aug 07, 2010 | 2005 Hyundai Elantra

1 Answer

Malfunction Indicator light


usually a sensor has gone bad. have it check by a mechanic on the computer.

Mar 29, 2010 | 2003 Subaru Forester

1 Answer

Water isn't stayins in runs hot


ull have to findwhere its leaking from are carpets or any thing wet

Oct 05, 2009 | 1995 Lexus ES 300

1 Answer

Malfunction indication


The Malfuntion Indicator Lamp (MIL) is being lit up by the vehicle's computer to indicate there is a problem with one of the vehicle's systems.Have the vehicle scanned,write down the code number and definition,and ask whoever scans it what's involved in repairing the malfunction,and what system it is in.Or come back in here with the code number and definition,and we can help you.

Jul 10, 2008 | 2003 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...