Question about 2000 Renault 181

2 Answers

The car is jerking as we are coming off the roundabout and the engine management system is giving us an unknown fault code of 101a11

Posted by on

  • Anonymous Mar 28, 2014

    101a11 fault code

  • Anonymous Mar 28, 2014

    101a11 unknow fault code



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

I would really like to help you but for me to come to any conclusion you're going to have to provide your VIN number in other terms vehicle identification number with the VIN I would know exactly which model you have engine installed gearbox installed and certain other factors, you can leave out the last six numbers for they are not necessary and are the serial number of your car look for something starting with VF1.
An adhesive label bearing the car's identity card can be found on the B-pillar or an adhesive label with the VIN can be located at the bottom - left of the windscreen.

Also does the problem occur as well on a straight road ?

Do you get any indication of warning lights on the dashboard instrument panel if so can you describe ?

Does the problem occur when the engine is warn/hot normal temperature or when cold ?

Is the engine misfiring when the problem occurs ?

Do you believe there is a loss of lack of power when the problem occurs ?

Is the engine making any strange noises when the problem occurs ?

To come to any proper conclusion the questions are necessary.

Posted on May 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Try this website for resolving car problems by downloading a FREE service manual for your vehicle. This is not an owners manual but a factory mechcanic's manual.

Posted on May 01, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine management light and jerking hard going into gear

Well the very first thing you need done to start the diagnosis of this problem, is to have the fault code or codes read that were set in the PCM memory when the CEL light came on.

May 23, 2016 | Mercedes-Benz E-Class Cars & Trucks

1 Answer

Engine light comes on and engine jerks

do the preliminary checks first ---oil /water levels and engine temperature . Run fault codes to find what sensor put the engine /transmission in limp mode to protect the units.

Feb 16, 2014 | 2006 Dodge Stratus

1 Answer

My VW Touareg has been jerking and after diagnising the problem, it showed Fault code 00907-Load Management Intervention. Has anyone ever come across this fault and if yes, how do I go about solving t

I cannot find any code as you have written it. There is no load management intervention in my auto data codes book however reference is made to load calculationvalues as ---impausable , too high and too low--mostly to do with the MAP and MAF sensor and the throttle sensor.. Best talk to a vw service technician for exact fault and how to fix.

Mar 14, 2013 | Volkswagen Touareg Cars & Trucks

1 Answer

Hi i have a 2004 bmw 320d just fitted a recon engine and wont start coming up with crank shaft sensor fault put a new one on and still wont start any suggestions please thanks

Hi Mountview,
First thing I'd suggest you do is delete the fault codes from your scanner....The engine management computer stores them, and they may be from your old engine?
Run another scan and if the codes come up again check the cables to the sensor. Defective parts are not unknown, especially where I am....
The anti theft device may have kicked in and be inhibiting starting....This will require resetting on your scanner.
Once you've checked all of that, bleed the diesel system, as if there's any air in the fuel line, it won't start
Regards Johngee10

Nov 19, 2010 | BMW 3 Series Cars & Trucks

2 Answers

What does a yellow enginge warning light indicate?

It indicates that the vehicle's computer has recorded a code in the memory. It will be a malfunction code of some sort. A code reader tool is connected to the diagnostic connector under the dash to retrieve the code, which gives information as to which engine management system has experienced a malfunction.

Sep 25, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

My 2002 Hyundai Accent goes into 1 gear smoothly, jerks into 2nd and goes into 3rd gear smoothly. Then goes back down into 3rd and 2nd gears smoothly and jerks back into 1st.

CHECK ENGINE light??? Whenever the 'CHECK ENGINE' (Service Engine Soon) light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE the problem and perhaps eventually fix the problem.

Oct 01, 2009 | 2002 Hyundai Accent

1 Answer

Sonata Jerks while driving, feel like the engine stalls & starts

I recommend that you find a good reliable shop and have the computer codes checked. Each time the check engine light comes on it also stores a code in the computer that shows which system is not properly operating. While this info is not specific, it is far better than guessing. The de-carbon service is likely not to help. I'm guessing that your problem is in your fuel management system, perhaps a fuel filter, and service to any decel/idle components. But not being there, it's only an educated guess!
good luck

Apr 08, 2009 | 2003 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

974 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

xxxxxx xxx

Level 3 Expert

4917 Answers


Level 3 Expert

78267 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides