Question about 1994 Toyota Celica

Open Question

Where is the fuse for the passenger door window?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the right front door panel on a 2004 buick le saber


Did you test it or are you guessing just because it won't open or close ? How To Install Remove Front Door Panel Buick Lesabre 00 05 1AAuto com both right an left are the same .
Power Windows System Components
The following components are used to control the power windows:
?€¢
Driver Door Module (DDM)


?€¢
Passenger Front Door Module (PDM)


?€¢
LH Rear Door Module (LRDM)


?€¢
RH Rear Door Module (RRDM)


?€¢
Driver Door Switch Assembly (DDSA)


?€¢
RH Front Power Window Switch


?€¢
LH Rear Power Window Switch


?€¢
RH Rear Power Window Switch


?€¢
LH Front Power Window Motor


?€¢
RH Front Power Window Motor


?€¢
LH Rear Power Window Motor


?€¢
RH Rear Power Window Motor


?€¢
Class 2 serial data circuit


?€¢
Power door serial data circuit


?€¢
PWR WDO 30 Amp Circuit Breaker


?€¢
DRVMDL Fuse (10 amp)


Driver Door Switch Assembly and Driver Door Module logic, Driver Door Module internal driver operation


?€¢
PASS MDL Fuse (10 amp)


Front Passenger Door Module logic and internal driver operation


?€¢
RRDR MDL Fuse (10 amp)


Left Rear Door Module and Right Rear Door Module logic and internal driver operation


Do you know about computer controlled power windows ?
Power Windows Operation
The vehicle is equipped with power windows controlled by the door modules. Each passenger door window can be operated, either from a switch built into the driver door switch assembly (DDSA), or from a switch mounted locally to its associated door. The driver door window can be operated only from the driver door window switch built into the DDSA.
When a window is operated from the DDSA, the DDSA interprets the window switch signal as a specific window switch request and sends the information to the driver door module (DDM) via the power door serial data circuit. The DDM examines the request and checks to see if it has received any class 2 serial data messages from any of the other vehicle modules (i.e. ignition switch position) prohibiting the movement of the window. If the window being operated is the driver door window, and if no prohibitive class 2 messages have been received, the DDM then applies voltage and ground to the driver door window motor to move the window glass as requested. If the window being operated is a passenger door window, and no prohibitive class 2 messages have been received, the DDM sends the request, via the power door serial data circuit, to the appropriate passenger door module. The passenger door module then applies voltage and ground to the passenger door window motor to move the window glass as requested.
When a passenger door window is operated from the power window switch mounted locally to its associated door, the passenger door module first checks to see if the DDM has received any prohibitive class 2 serial data messages. If there are no prohibitive messages, the passenger door module powers the associated passenger door window motor.
Both front door windows have the express down feature. This allows the front door windows to be fully opened by momentarily pulling the appropriate window switch lever to the second detente and then releasing.

Oct 30, 2016 | Buick Cars & Trucks

1 Answer

2002 chevy blazer passenger power window will not power up, dead as a door knob.


if all the windows work but the passenger side then its not a fuse its the power window switch in that door pop the switch out and unplug it then take the switck out of the back door if it is four door and plug it in if it rolls the window up you need a new switch

Oct 07, 2012 | 2002 Chevrolet Blazer

1 Answer

2004 Toyota tundra passenger power window switch not operational


Try a passenger side door switch or a new complete master switch on drivers door. Alaways check fuses also.

Jun 16, 2012 | 2004 Toyota Tundra Cab

1 Answer

Similar electrical issues with driver's side door controls. Power locks, power window, and power mirror on driver's side are not functioning. I can manually unlock the door, but the buttons on...


CHECK FUSES FOR POWER WINDOW,CHECK FUSE FOR POWER MIRROR AND CHECK FUSE FOR POWER DOOR LOCK.IF FUSE OKAY DOOR CONTROL MODULE FAULTY ITSELF.

Sep 11, 2011 | 2004 Saab 9-3

1 Answer

I have a lhd grand cherokee and ive lost positive feed to passenger side electric windows and folding door mirror checked fuses no fuse for electric windows


There is only one fuse for all power window and power mirror operation (Fuse 12 (50A) in under hood fuse panel). If the passenger side window and mirror functions are not working, and you have verified that there is no power going to the passenger door module (pin 1 of C1 connector), then there is a wiring issue in the harness.

Sep 06, 2011 | 2001 Jeep Grand Cherokee

2 Answers

Passenger window won't work its elelectric, acts like no power to it. Is there a fuse I have no book and can only find the master fuse box under hood?


Hi their is only one fuse for the windows and thats the one you have checked, if the other windows are working then the fuse will be ok.

if the drivers door has a seperate control for the passenger door try this and if it wont work from either the passenger side or the drivers side then the problem is going to be either the motor or the regulater and these are both inside the passenger door.

if how ever the drivers and passenger controls are seperate and you cant control the passenger side for the drivers door controls then what you can try is swapping the switches over from the drivers door to the passengers door, if the controls are the same then all you need to do is get a flat bladed screwdriver and pry the control up as its only pushed into place then unclip the wires and swap the switches over then if the passenger side then works you know you need to get a new switch of it still dont work then it will be either the motor or regulater at fault.

either way the door panel will need removing and you will need to test if you have any power going to the motor.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Sep 15, 2010 | 2006 Dodge Grand Caravan

2 Answers

2005 Honda Accord, all three passenger power windows stopped working. The drivers window works and the window lock is not on. When I try the switch on each of the passenger windows i cvan hear a clicking...


you most likely have a power/ground/switch issue in the drivers door. the power for the other three doors must first travel through the switches in the driver door before it goes to the passengers. hence the reason why when somebody rolls down a passenger window and you push the up button on the driver door the window stops moving. the wires can break inside the rubber boot in the door jam. you can also have an internal problem with the driver door switch unit. you would need a wiring diagram to diagnose this concern.

Mar 23, 2010 | 2005 Honda Accord

6 Answers

Windows won't roll down


Does the rear window work from the passenger switch?

Oct 07, 2009 | 2003 Cadillac CTS

Not finding what you are looking for?
1994 Toyota Celica Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...