Question about 1999 Oldsmobile Cutlass

2 Answers

'99 olds cutlass, not out of gas new battery and it will crank but won't start had a couple flats so I got a ride for a few. now won't start.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Check your pistributer to make sure that you're getting spark. pull the rotor cap and turn the key to see if it's sparking. it's best to replace those once a year to 18 months anyways...the cap and rotor are cheap and i've had 2 go on me in the middle of nowhere in the middle of the night...an ounce of prevention......

Posted on May 01, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have this exact car. it could be the passlock anti theft system. these cars and malibu cars are famous for this! try turning your key to the "on" position. leave it like that for 10 minutes. after 10 minutes, turn it forward to start. remember do not turn it off...keep turning forward. it should start if it is this problem.

Posted on Jun 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine cranks but won t start


run the fault codes and see what comes up . IT may be that there is a low fuel pressure problem from a pump that is not getting a true voltage until the alternator is charging.

Feb 22, 2014 | Cadillac Escalade Cars & Trucks

1 Answer

94 cutlass ciera s won't crank


It could be a near-dead battery. Sometimes they have enough power for lights/etc. but not enough to crank.

Apr 01, 2013 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Volvo 2005 EC210 BLC Engine Crank but no start .display shows code 140SID and 250 9


It can be faulty fuel pump or clogged fuel filter or its issue with starter or battery or may be problem with sensors.There are few possibilities that can cause these problem,there are few help links provided related to these issue. Click the link below and refer the troubleshooting procedure to solve the problem:-----
Engine cranks but will not start? http://technoanswers.blogspot.in/2012/02/engine-cranks-but-will-not-start.html
-------- Landcruiser prado won't start http://technoanswers.blogspot.com/2012/10/landcruiser-prado-wont-start.html ------- 2007 ford expedition engine cranks but wont start http://technoanswers.blogspot.com/2012/10/2007-ford-expedition-engine-cranks-but.html

--------
: Engine Cranking Fast but not Firing up? http://whatisbyme.blogspot.in/2012/05/1999-lexus-gs300-engine-cranking-fast.html

----------
1997 Oldsmobile Cutlass Ciera: The Engine cranks but not start? http://schematicsdiagram.blogspot.in/2012/04/1997-oldsmobile-cutlass-ciera-engine.html

-----
Mazda MPV cranks but will not start? http://technoanswers.blogspot.com/2012/01/mazda-mpv-cranks-but-will-not-start.html
-------- MAZDA MPV WILL CRANK BUT NOT TURN OVER TO START? http://technoanswers.blogspot.com/2012/01/mazda-mpv-will-crank-but-not-turn-over.html
--------- Vehicle Cranks Fast but Won't Start http://whoisbyme.blogspot.in/2012/07/vehicle-cranks-fast-but-wont-start.html

------
How to test Crankshaft Position Sensor? http://fordrepairhelp.blogspot.in/2012/03/how-to-test-ford-focus-crankshaft.html

---------
These details will help,keep updated for more help.

Oct 16, 2012 | Cars & Trucks

1 Answer

I have a 1992 Oldsmobile Cutluss Supreme was going down road the other night and just died, changed battery after having old one on charger for a day and getting know place, the car now cranks and turns...


to check fuel pressure you have to use a gauge not just push on the schrader valve to see if gas squirts out.these systems run at 35lbs pressure anything much less and it will not start.also check the fuel volume as if its low the pump cannot supply enough to fuel the motor to run it won`t.

Apr 03, 2012 | 1992 Oldsmobile Cutlass Supreme

3 Answers

I was driving and the car cut off. It won't start but it cranks and won't turn over.It is a 1995 Olds Cutlass Ciera SL, 6 Cylinder.


your terminology is wrong.if it cranks its turning over what you mean is it won`t start(fire up) as you said at the beginning.anyways it sounds like you could have a fuel pump problem that stop working.this happens alot.you should check for spark at the plugs to make sure its not an ignition problem.did you notice a check engine light on when it was running.if so there will be a code in the ecm and may be the cause of your problem.

Jul 17, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Ym oldsmobile cutlass supreme wont start and i put


Worst case or one suggestion might be the timing chain. I bet I get some flack here from pros and dealer techs, but the slow cranking is what I keyed off of. Iam sure the knowledgable olds folks will help you. Also bad battery cables,bad starter or just it's solenoid. Do you feel it is a starter issue as in cranking or no start as won't stay running?

Feb 08, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

2 Answers

My 88 Oldsmobile Cutlass Ciera is running rich and


The Oxygen sensor is very suspect. it is easy to damage on install, even with the correct tool.

Put the old one back in and test the car...

Jan 31, 2010 | 1990 Oldsmobile Cutlass Ciera

1 Answer

How to replace gas sending unit on 99 olds cutlass


First disconnect and remove the battery.
Then, remove gas cap to release pressure. Than remove fuel lines and drain gas into suitable container. Next, loosen the bolts (you can use a tranny jack or have someone else help hold tank and lower it down.
Now you will want to use a BRASS punch. (do NOT use metal or it will cause a spark)
Use brass punch and hammer and loosen nut on tank counter-clockwise to loosen sending unit.
Once nut is loose, pull out sending unit and unplug the wire harness.

Reverse procedure to reinstall

May 23, 2009 | 1999 Oldsmobile Cutlass

Not finding what you are looking for?
1999 Oldsmobile Cutlass Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...