Question about 1999 Chevrolet C/K 2500

1 Answer

I have a 1999 chevy 2500 classic with a diesel and the passenger side brake and turn signal stopped working replaced the bulb still nothing and the running lights work i am stumped

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Typically, this is an indicator that the turn signal switch on the steerint column is bad. The switch can be removed and looked at and it will look perfect, but somehow it is burned out or otherwise inoperative. Been there, done that.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights turn signal not working on drivers side


check the wire loom from the boot to under the back seats, I have herd over time the back seat can cut the wiring loom as the metal in the back seat can cut the wires. saw this on a classic cars site a few years ago. you will need to fix the wires back and reseal the wires with sealing tape. also make sure the wiring is back out of the way for the seat.

Mar 19, 2014 | 1966 Ford Mustang

2 Answers

Honda Civic Brake light Problem


sounds like a bad earth/ground to me, common fault with brake lights

Feb 23, 2014 | 1999 Chevrolet Tahoe

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

2 Answers

1999 Chevy Malibu driver side tail light won't come on.


I would say that the tail lamp isn't plugged in but- if it is follow the wiring from the tail lamp forward there must be a break in the wiring -maybe someone cut the wires to patch in towing lights - cheers Denny

Nov 27, 2013 | 1999 Chevrolet Malibu

1 Answer

Passenger side brake light & signal not working


Hello! The Right Stop/Turn Signal are the same bulb...The most obvious answer is to replace the bulb...But if you have done that without success let me know and I'll find the fault....Guru....saailer

Oct 30, 2011 | 2007 Cadillac DTS Sedan

1 Answer

Changed multi function switch, bulbs, and passenger side rear light assembly (reverse, blinker, brake light). Everything works except the rear passenger side turn signal but the front passenger side is...


You have a bad connection at the rear passenger side turn signal. It is either the connection is corroded or a wire is loose on the ground side of the circuit.

Nov 11, 2010 | 2006 Dodge Ram 2500

1 Answer

2000 chevy 3/4 ton diesel no brale light but third brake light wo


I just Know that you replaced the bulb ,try a test lite ,make shure it's grounded well poke inside the socket for the bulb this metal socket gives the bulb both electric and a ground ,this is the problem,good luck.

Nov 14, 2009 | 2000 Chevrolet 2500

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards


I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

2 Answers

2001 dodge diesel doesn't have brake lights.


Sounds like a short in your wiring. Have you checked the bulbs and you could have bought a bad brake light switch. Try having somone step on the brake lights and use a test light to see if your getting current back there

Aug 01, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

2000 Chevy CK, have hazard lights, turn signals,


test your brake switch located on the brake fulcrum. you can unhook the wires and usea paper clip to connect the two wires together if the brake lights come on then replace the switch, if it does not come on and the bulbs are ok then replace turnsignal switch.

Jul 18, 2009 | 1999 Chevrolet 3500

Not finding what you are looking for?
Cars & Trucks Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...