Question about 1993 Buick Skylark

2 Answers

I change the Thermostat, spark plugs, oi change an hose on my 1993 buick skylark but its still running hot

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Have u changed gas lately? i mean have u put the cheapest gas then change to the expensive this can be the problem but it will get used to it in a few days..

Posted on May 01, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 2,100 Answers

How about the coolant? , the radiator clogged up,? how about the fins, are they clean>? check it out, hope this helps.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my 1995 Buick skylark 3.1litre idling at 4rpm and running hot? I replaced all the sensors and still have the same problem


4 or 400 rpm it wouldn't idle at 4 rpm . how about thermostat ? do the electric fans work , water pump ! . IAC valve - idle air control passages plugged .

May 23, 2015 | 1995 Buick Skylark

1 Answer

Why does my 92' Buick Skylark keep dying Out.?


You have 2 issues here #1 the engine is running hot . Test the cooling system fans they seem to be not working. #2 car dies i would start with testing the secondary ignition (spark).

Apr 30, 2014 | 1992 Buick Skylark

1 Answer

I have a 1995 buick lesabre and i changed control module,position sensor,cam sensor and computer. car stop and will turn but want start. when i first bought car it had this vibration on take off but never...


Are you getting gas and spark to the cylinders?

If you add gas to the throttle body, does it start?
If so, then you have a fuel pump delivery problem in this vehicle.

If it doesn't start, then you may have a spark problem at the spark plugs due to a coil pack going bad or a module (but you said you changed the module).

Also, is this a 1995 Buick LeSabre of a 1993 Buick Skylark (which it is listed under)? What engine size is this?

Aug 06, 2010 | 1993 Buick Skylark

1 Answer

94 buick skylark thermostat


follow top radiator hose to engine thermostat is in the housing where the hose connects to the engine

Feb 06, 2010 | 1994 Buick Skylark

1 Answer

My dauthers boy friend has a 93 buick skylark he just got his linc he put his car noise first in a ditch 3ft deep half full of water got it out found out he didnt have any brakes got it to start idles good...


More likley than not your plugs have to be changed, unless, they were cleaned with a spark plug sandblaster. The fouled out part of the plugs hides deep within the insulator chamber and cannot be cleaned without sandblasting. Therefore the spark, instead of tipping off at the electrode, tries to climb into the insulator chamber leaving a very weak spark. P.S. while changing the plugs, turn the engine over without them in to clear the cylinders. Thanks, Dana

Jan 18, 2010 | 1993 Buick Skylark

1 Answer

1991 3.3l buick skylark,have spark at plugs,have fuel pressure at rail,but no fuel in cylinders,fuel regulator maybe?


Or maybe as simple as a blowen fuse for the injectors. There should be a fuse for the injectors, either under the hood or inside of car.

Jun 14, 2009 | 1993 Buick Skylark

1 Answer

Tips on changing out thermostat on 93 Buick Skylark


yeah its the thermostat if your not getting any heat from the heater.

flush: how to video

Oct 13, 2008 | 1993 Buick Skylark

2 Answers

Overheating 1993 Buick Skylark


it could be a fuse or fan relay, or a stuck thermostat, i will recomend to aply stright power to radiator fan to see if works, if don't replace fan and fuse, but if does, then it might be the thermostat, one very easy way to test the cooling fan system is by unpluging the coolant sensor with the car runing, if fan come on whit car runing and sensor disconected, the the system is ok, and might be a bad sensor, or stuck closed or open thermostat. please leave feedback if this take care of your problem

Jul 15, 2008 | 1993 Buick Skylark

Not finding what you are looking for?
1993 Buick Skylark Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...