Question about 1990 Ford Bronco

1 Answer

Remove the rotors on 1990 FORD BRONCO? Got the

Remove the rotors on 1990 FORD BRONCO? Got the cover off the 4 wheel lock but don't know how to get to the nut???? Do I need a special tool? THANK YOU!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Here is a website that a free manual can be down loaded for your vehicle


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change front four wheel drive rotors on my bronco?


Lift it up, remove the tire, remove the caliper and caliper mount bracket (2 separate pieces) then knock the rotor off, you can smack it with a hammer but if you're reusing the rotors and are just turning them dont hit them where the pads grab

Feb 07, 2012 | 1990 Ford Bronco

2 Answers

When buying rotors for a 95 Bronco 4X4 should the rotors be seperate from the hub or should they be attached as one piece? Im getting mixed info from part stores.


The reason you're getting mixed info from parts stores is because it comes both ways.
Look at the following to determine which one you have, 4 wheel disc brakes (floating front rotors) or rear drum brake model (except 4 wheel disc brakes):
Brake Disc (Rotor) REMOVAL & INSTALLATION Except F-Super Duty with 4-Wheel Disc Brakes Fig. 1: Secure the caliper so there is no tension on the brake hose 88289p22.jpg
  1. Jack up the front of the truck and support it with jackstands. Remove the front wheel.
  2. Remove the caliper assembly and support it on the frame with a piece of wire (or something equally secure) without disconnecting the brake fluid hose.
  3. Remove the hub and rotor assembly.
  4. Install the rotor in the reverse order of removal, and adjust the wheel bearing as outlined in Section 1.
F-Super Duty with 4-Wheel Disc Brakes The hub and rotor are individual pieces, allowing the rotor to be replaced independently. The front and rear rotors are the same and are attached with 10 bolts and washers. The bolts are tightened a little at a time, in a crisscross fashion, to an ultimate torque of 74–89 ft. lbs. (100–121 Nm). prev.gif next.gif

Sep 03, 2010 | 1995 Ford Bronco

1 Answer

How to remove routers for a for bronco 85 302 full sized


Removing rotors.

1. Jack up, put on jack stands and remove tire (obviously)
2. Remove caliper
3. Remove bolts holding locking hub body to hub
4. Remove snap ring from end of axle, Remove hub retainer ring from ID of wheel hub. Use a small screwdriver or pick to start it out of the groove. Remove the hub body
5. Remove the outer bearing lock nut, lock washer and the inner adjusting nut
You need the special socket for this OTC #7158 or similar
6. Remove the outer bearing and then the hub
7. To separate the rotor from the hub, use a soft faced hammer to drive the studs out
8. Turn the hub over and set the new rotor in place. Put the studs back in.
9. I will usually use an air hammer to drive the studs back in. Alternating in a circular pattern. If you don't have access, you can use a large diameter punch or another hammer on the back of the studs.
10. Now would be a good time to repack the bearings and replace the wheel seals. Pull the spindles and check the bearings and seals in the back of them. If they are not rusted, slab some grease on them and put back together.
11. Install the hub and rotor assy, and the outer bearing and bearing adjustment nut.

Apr 25, 2010 | 1985 Ford Bronco

1 Answer

Removing auto hubs form my 1996 ford bronco and replaceing them with warn manual locking what all comes out with the auto hub


large O-ring that holds in the lockout,just on other side of outside cover with 6 allen head or torque screws,little snap ring around the axel shaft outside end of spline,everything you see all the way to the ratchet nut that holds the rotor-hub on.The ratchet nut has 4 notches in it,stop there way inside.

Feb 16, 2010 | 1996 Ford Bronco

2 Answers

Take rotor off 4x4 bronco


I've got a 96' with manual turning hubs,before I go into 4 wheel drive I have get out and turn them onto lock,when I change my rotor, as soon as I took that part off,and whatever parts came out with it,and then you have to look real close of the inner hub there is a ring in there you have to get that out now your get to the outer lock nut,you'll need a spanner locknut wrenchto loosen it,next is lockwasher you can pull it out then you got inner lock nut take it out ( when you put that back you can hand tighten it) the rotor should come out

Feb 11, 2010 | 1996 Ford Bronco

1 Answer

How do you remove the rotors on a 1995 ford bronco


The rotors on most vehicles are removed by (1) removing the wheel, (2) remove the silver colored cap in the center of the hub, (3) remove the cotter pin that goes through the axle nut and axle, (4) remove the axle nut, (5) remove the disc brake caliper (6) now pull on the rotor. It should slide off the axle. Reassemble in reverse order, being sure that the axle bearings are in place with proper amount of grease.

Oct 25, 2009 | 1995 Ford Bronco

1 Answer

1996 ford bronco


Good lighting will help. Also, use a brake cleaner spray or penetrant to clean things off so you can see .I have a 1996 F150 with push button 4WD with manual locking hubs. Dana 44 axle. Yours may be similar. For front wheel, remove locking ring just inside the inner edge of the hub housing (once you remove the manual hub locking switch, 6 screws on mine, could be 3 on others). Not conspicuous, took me awhile to find. Your hub locking assembly will appear to be recessed just behind its edge goes around outer circumferance. Next, Remove the locking spring (looks like a washer) around the very end of the spline shaft. This is towards the center around the shaft. There is a silver looking retainer ring you have too pull it over, use very small standard screwdriver. Locking mechanism should pull right out after that, giving you access to the outer bearing adjustment nut. Use 4 prong wheel bearing nut socket readily available at auto parts stores. Remove adjustment nut. Next, remove spacer that fits into keyway on shaft. There is nothing holding it on, just pull it off. Beneath that there is another bearing nut, remove this also with 4 prong socket. Just pull hub off after removed. Sometimes rust will keep you from removing at this point. Just get a good penetrant lubricant, spray on and let soak, repaeat if necessary . You can also get a plastic 4lb+ dead blow hammer to assist. Bang on rotor from inside to out. Be prepared to service wheel bearings, they fit into the inside of the rotor/hub assembly and will be dislodged when you remove it. This is as far as I have gotten myself. Good Luck.

Oct 21, 2008 | 1996 Ford Bronco

1 Answer

Changing brakes and rotors


Remove te cross pins that hold the caliper and the brake pads in place, then remove the caliper bracket, there are 2 bolts at the backside, then the rotro just slides off, clean any rust on the rotor mount area while the rotor is off, then using a large clamp depress the piston in the brake caliper and reinstall in reverse order, one word of caution, use quality replacement parts, Wagner is very good, if you don't use good parts you will end up with poor brake performance.

Oct 15, 2008 | 1990 Ford Bronco

Not finding what you are looking for?
1990 Ford Bronco Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...