Question about 2002 Chrysler Sebring

2 Answers

Can the engine in a 2 door Sebring (2.7) be replaced with the engine from a 4 door stratus(2.4), both are 2002. What other parts are interchangable and How would i find out

Posted by on

  • paul May 01, 2010

    what parts are interchangeble on the 2002 2 door sebring and a 4 door 2002 stratus. I want to use the convertible sebring and hopefully have a parts car. The sebring is 2.7 and has timing belt broken. The 4 cyl on the stratus is ok but I would like to know if it can just swap out and what I need to swap with it. Computers ? sensors? Harness? trans? Mounts?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 412 Answers

No, the engines are not interchangeable.If you are looking to do a motor swap from a different vehicle then you need to make sure that the liter size of the motor and the displacement are the same....ie...2.4liter 3.0 liter, 3.5 liter, etcetera.If you are looking tp purchase a "donor" vehicle to use it for a motor or such, then you can look at the vin number to determine if it's the same engine code as yours.Count the eighth number of the vin and it will be the engine code, as long as this vin number is the same then the motor and/or trans will work in your vehicle.I hope I could help...Thanks for using Fixya, and rate me accordingly!!

Posted on May 02, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Sure...but you will have to replace everything...harnesses, computers and every sensor plus the trans and then probably have to modify the engine mounts plus suspension but anything is possible if you can put in the work and time

however, personally, this vehicle is not with the time/effort


Posted on May 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Compatible? Automatic Manual 2002 Sebring/Stratus RT Sedan


Yes they can be used, but you must swap everything including the entire wiring harness.

Apr 01, 2016 | Cars & Trucks

1 Answer

Can anyone.tell me the Torqe specs for a 2004 or cruiser


Head and Cam Bolt Torque specs? - PT Cruiser Forum

www.ptcruiserlinks.com > ... > Tech & Performance Forum

Nov 5, 2012 - 2 posts - ‎2 authors
I am putting everything back on after replacing the head gasket. I was wondering what the Torque Specs and Sequences are for both the Head ... Torque Specs
10 posts
Jul 28, 2012
Valve cover torque specs
5 posts
Jul 4, 2011
Timing Repair Project - Bolt Torque Specs
7 posts
Jun 16, 2011
torque specs?
9 posts
Mar 20, 2006
More results from www.ptcruiserlinks.com

Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts ...

? 5:07
https://www.youtube.com/watch?v=2wB2o27eWgo
Aug 20, 2015 - Uploaded by World Mechanics
Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts Install and Torque Specs 2.4 Engine. ... 2004 Chrysler PT CruiserCamshaft Install

Dodge Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head ...

? 6:08
https://www.youtube.com/watch?v=7rY7tDbye-8
Aug 16, 2015 - Uploaded by World Mechanics
... Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head gasket Install and torque specs We took this video to ... 2004 Chrysler PtCruiser head gasket

Jan 18, 2016 | Cars & Trucks

2 Answers

Where is bank 1 sensor 2 located at on 2003 dodge stratus wit a 2.4 engine ?


    Dodge Chrysler - YouTube

    ? 2:54
    https://www.youtube.com/watch?v=vs2DuvehVGA
    Oct 31, 2013 - Uploaded by 1A Auto Parts
    I want to know about a Dodge Stratus 2002 sensor. ... I have a 05 Chrysler 300 2.7 engine with a fault code ... images for Where is bank 1 sensor 2 located at on ...


    More images for Where is bank 1 sensor 2 located at on 2003 dodge stratus with a 2.4 engine

    Where is bank 1 sensor 2 located at on 2003 dodge stratus wit

    www.fixya.com/cars/t26025690-bank_1_sensor_2_located_2003_dodge
    22 mins ago - SOURCE: check engine light is on...bank 1 sensor1 oxygen sensor. if u have one .... 2.7L dodge stratus/ #1 bank #2 sensor location? on 2004 Stratus. Oct 24 ... How can I set the timing on a 1996 dodge stratus 2.4l engine.

    P0137 02 Sensor Circuit Low Voltage - OBD-Codes.com


Dec 28, 2015 | Dodge Cars & Trucks

1 Answer

I have a 00 dodge stratus 2.5 how will bypass the antitheft circuit in order to start


Bypassing Neutral Safety Switch, Chrysler sebring 2000 ...

? 2:21
https://www.youtube.com/watch?v=uBszX3CnXeo
Apr 27, 2012 - Uploaded by Brianna Kufa
Bypassing Neutral Safety Switch, Chrysler sebring 2000. Brianna Kufa ... 1) Remove wiring harness attached to tranny. (there's 4 connections: ...

Part 1 -How to Troubleshoot a No Start (Chrysler 2.0L, 2.4L)

troubleshootmyvehicle.com > Chrysler > 2.0L, 2.4L
Dec 29, 2012 - Failed starter motor. Failed neutral safety switch. ... Dodge Vehicles: Avenger. 1995 ... Stratus. 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002.

Automatic Shutdown Relay - Allpar



Nov 13, 2015 | Dodge Cars & Trucks

3 Answers

Will a 2004 2.7 litre motor out of a Dodge Stratus run and work in a 2002 Chrylser Sebring 2.7? both have sameengine codes


I have a 2002 Dodge Ram 1500 pickup so I have had some experiences (mostly bad) with Dodge electronic ignition systems.
I have no specific knowledge about a Sebring or Stratus but as someone who has been working on cars and trucks for the better part of 40 years I'll make a guess that the computer control module in the Sebring is different than the CCM in a Stratus that is a two year newer model. Since you are dealing with engines from 2 different year models there were likely some (maybe minor) changes to the electronic ignition system over the two years. If the wiring harness connectors for the CCM in the Sebring and Stratus are identical I would move the CCM from the Stratus into the Sebring and see if the Stratus engine will then fire. Some questions to consider:
1. Was the Stratus engine running OK before you removed it from the Dodge?
2. Are you sure all electrical connections are correct (and complete) after installing the Dodge engine in the Sebring?

Aug 14, 2014 | 2002 Chrysler Sebring

1 Answer

Fuel Rail Leak


Did did you change the o-ring at the fuel line to fuel rail connector? Do that before you change the fuel rail. According to an e-bay seller who is selling a used fuel rail from his salvage shop, the following fuel rails are interchangeable.
300 05-10 Fuel Injector; 2.7L and 3.5L
AVENGER 08-10 Fuel Injector; 2.7L
AVENGER 08-10 Fuel Injector; 3.5L
CARAVAN 08-10 Fuel Injector; 4.0L
CHALLENGER 09-10 Fuel Injector; 3.5L
CHARGER 06-10 Fuel Injector; 2.7L and 3.5L
JOURNEY 09-10 Fuel Injector; 2.7L
JOURNEY 09-10 Fuel Injector; 3.5L
MAGNUM 05-08 Fuel Injector; 2.7L and 3.5L
NITRO 07-11 Fuel Injector; 4.0L
PACIFICA 05-06 Fuel Injector; 3.5L
PACIFICA 07-08 Fuel Injector; 4.0L
SEBRING 04 Fuel Injector; Conv, 2.7L, from 07/30/03
SEBRING 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
SEBRING 05 Fuel Injector; Conv, 2.7L
SEBRING 05 Fuel Injector; Sdn, 2.7L
SEBRING 06 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 2.7L
SEBRING 07 Fuel Injector; (Sdn), 3.5L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 2.7L
SEBRING 08-10 Fuel Injector; (Conv, Sdn), 3.5L
STRATUS 04 Fuel Injector; Sdn, 2.7L, from 07/30/03
STRATUS 05 Fuel Injector; Sdn, 2.7L
STRATUS 06 Fuel Injector; (Sdn), 2.7L
TOWN & COUNTRY 08-10 Fuel Injector; 4.0L

Mar 04, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Sebring 1997 I need picture to lookat the PCM sensor and the Crankshaft position sensor (CKP sensor)


On 1997 Chrysler Sebring 2.5L MFI 6cyl...
- the PCM is located in the left side of the engine compartment, beside the Power Distribution Center (PDC).

zjlimited_767.gif

Fig. 1: Location of the PCM on the Cirrus, Stratus, Sebring convertible and Breeze models

zjlimited_768.gif

Fig. 2: Location of the PCM on the Sebring coupe and Avenger models

- the Crankshaft Position Sensor is located: under hood, driver side, upper engine area, mounted on end of engine block

zjlimited_769.gif

Fig. 4: Location of the crankshaft position sensor on 2.5L engines

Hope helps; remember to rating this answer and leave some testimonial comments.

Oct 09, 2011 | 1997 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...