Question about 1996 Oldsmobile Achieva

1 Answer

Serpentine belt broken no longer attatched to any pullies need diagram.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Check for a picture stuck to the underside of the hood, or the frame on the front of the car by the headlights. most cars have them. If not, you can pick up a Haynes manual at Auto zone, Advance, O'reily's, etc.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change serpentine belt on 2006 buick lacrosse


Start by drawing a diagram of the belt routing. Serpentine belts normaly have 1 spring loaded tensioner (1 pully will have a nut or 3/8 or 1/2 inch drive hole) That will be the tensioner. get spanner or ratchet to fit & lever the tensioner away from the belt. Remove belt. fit new belt to most pullys except the easiest to get to, lever the tenioner back & fit the belt to the last pully, Check the belt is on all pullys properly & your done

Jun 28, 2012 | Cars & Trucks

1 Answer

Serpentine belt diagram


the main digram for all drive belt ( flat belt ) is . first look to all pully make drowing out side with small paper 3 or 4 or 5 or 6 .....pully the main drive pully is crank . the end of you belt round the pully must be more than 180?? angl. alternator angl. more than 180 .compressor or water pump anther pully try use same digram .guide pully and belt tensioner no need to put angl .

Jun 25, 2011 | 2005 Ford Focus

2 Answers

Need to know how to adjust serpentine belt, please show diagram. 6 cyl engine.


Really don't need a diagram. Loosen the slide bolts on the power steering pump. loosen or tighten the pump by turning the jack screw (long transverse bolt) under the pump. Once the belt is tightened up, lock down the slide bolts and you are finished.

Jun 17, 2010 | 1994 Jeep Grand Cherokee

1 Answer

My GXP Grand Prix shreded the serpentine belt the mechanic said something about the tension pully and he needs to replace the whole frame? is there a diagram for the serpentine pullies?


You mean replace the tensioner assy , thats a common problem. If it has an idler pully, replace that too. Diagrams are easy to find , even easier if you provide the year and engine size of your car.

Dec 19, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

Need diagram to install serpentine belt


Look at the pullies to see if they are smooth or if they have lines on then. The back side of the belt the ( smooth side) goes against the smooth pullies.The side with lines on it goes to the other pullies. Some vehicles have the diagran in the engine compartment. Under the hood or by the top of the radiater.

May 10, 2009 | 2001 Isuzu Rodeo

1 Answer

Load squeaking when running dies sometime


all pullys should be moving in the serpentine belt, if one is not moving than that would cause friction and belt winning. replace what ever that pully is attatched to the bearing is ceased.

Sep 25, 2008 | 1990 Ford LTD Crown Victoria

1 Answer

SERPENTINE BELT


You need to go to Autozone or where ever and rent a serpentine belt tensioner pully wrench before you do anything. then you get a diagram for your car and route the belt liek the diagram says, google image should work just fine. the tenion pully on an 03 is in the on the right as you are standing looking at the pully system. its the second one down. its the only one that moves.

Aug 02, 2008 | 2003 Ford Escort

Not finding what you are looking for?
1996 Oldsmobile Achieva Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...