Question about 1996 Dodge Caravan

2 Answers

I have a dodge caravan 1996, i didn't know how to change by front signal light's bulb, i unscrewed one screw, but the light didn't come out, how do i do it?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

This is the passenger side, correct?

On this side, you should not have to take out anything. Look on the back side of the light under the hood and you should see the wiring on the back of the light. The bulb simply turns counter clockwise to come out, and then take the bulb out, new in, and screw in clockwise.

These sockets will only go back in one way as one or more tab are shaped specifically for one insert point. This is to make it "easier" to put back in. Just look at the flanges on the socket and on the backing of the lense cover and match each with eachother.

To make it easier, when removing pay close attention to which is where.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @Fixya.com

Posted on May 01, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

There is an access panel on the inner fender. if you look inside the wheel well towards the front, you will see a removable 4 inch circular door that turns to unlock, then remove. you can then get your hand up to the back of the lense, and turn the lamp socket counter clockwise to release, then pull the bulb out of the socket. good luck!

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change a turn signal bulb on a 2006 dodge grand caravan


The rear remove two push in pins remove tail light housing replace bulb. Front remove screws holding head light housing replace bulb

Feb 28, 2015 | 2006 Dodge Grand Caravan

1 Answer

How to change turn signal lights


REAR UNSCREW THE UNIT PULL IT OUT TWIST THE PART THAT HOLDS THE BULB HALF A TURN PULL IT OUT REMOVE BULB REPLACE WITH SAME NUMBER BULB.

FRONT BULB CHECK TO SEE IF YOU CAN ACCESS SIGNAL FROM BEHIND UNDER THE HOOD. IF NOT REMOVE THE LENS BY REMOVING THE SCREWS AND ACCESS THE LIGHT THAT WAY. PUSH THE LIGHT BULB AND TWIST IT IT WILL POP OUTBECAUSE IT IS SPRING LOADED. ALWAYS MAKE YOU SURE YOU CHECK THE NUMBER ON THE REPLACEMENT BULB TO AVOID HAVING TO DO THE JOB TWICE/

Mar 01, 2014 | 1996 Dodge Dakota

2 Answers

1995 Dodge Dakota signal light and brake lights quit


I had the same problem that the brake light / turn signal on the right side didn't work (in the 2006 Dodge Caravan it's the same bulb). After a long search I found the problem: There was corrosion on the contact of the bulb assembly. After scraping off the corrosion everything works now.

Dec 20, 2011 | 1995 Dodge Dakota

1 Answer

How do I change the drivers side front turn signal bulb on my 2000 Grand Caravan?


There are bolts under the hood on top of the plastic housing. If you look at the light cover you can see where it connects to the body. Either the bulb twists into the housing and all you have to do is twist it out (to the left or right) or you have to unscrew the housing pull it off and change the bulb then put the housing back on. Hope this helps, James Booth. PLEASE RATE THIS!!! :))



May 20, 2011 | 2000 Dodge Grand Caravan

1 Answer

I need to change a left side directional light the left side directional light is not working so it need to replace it is a dodge caravan 1996


To replace your turn signal - There are 3 screws on the front of the light assembly. Remove them and slide the light assembly out and you will see the turn signal socket is in the middle of the outer half of the headlight assembly. Twist the socket counter clockwise to take it out of the assembly. Pull the turn signal bulb straight out from the socket. Insert new bulb and reverse procedure to finish.


Mar 12, 2011 | 1996 Dodge Caravan

1 Answer

Changing front turn signal bulb


to change the front turn bulb if there are 2 screws you can unscrew them or if its fixed you will have to remove the front Grill including the plastic cover around the head lights to get to the back of the signal light and change the bulb

Jan 31, 2011 | 1996 Nissan Pickup

2 Answers

How do I access the front left indicator light for


2fac621.gif
To change a front parking/turn signal lamp bulb on Town & Country models, remove the screw, and hinge the lamp on the tab


b2dedfc.gif
With the lamp free of the facia, the bulbs can be accessed by twisting the sockets counterclockwise, and pulling the bulb from the socket

1.Pull the bulb straight out of the socket.
2.Replace the bulb.
3.Installation is the reverse of the removal procedure.
4.Verify light operation.

Jan 19, 2010 | 1996 Dodge Caravan

1 Answer

Left turn signal flashes faster than the right turn signal. how do i remove the bulb?


It depends on if its the front or the rear bulb. In the front the screws are mostly on the out side of the car. The baco screwa ar in side the trunk inside of the truck liner. You have to remove the hole light fixture from the car and then turn the bulb holder out to change the bulb

Dec 13, 2009 | 2006 Dodge Grand Caravan

1 Answer

How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


  1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
  2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
  3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
  4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

Oct 16, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Need help changing front light bulb of Dodge 2004 Caravan


I think on those the easiest way is to remove 4 or 5 screws from entire housing with hood up, and pull it right out.

Dec 30, 2008 | 2004 Dodge Caravan

Not finding what you are looking for?
1996 Dodge Caravan Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...