Question about 2001 Pontiac Grand Am SE

1 Answer

My passenger front seat will not budge.ive tried everything!i have a 2001 pontiac grand am.please tell me what size the bolts are that hold the seat in.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

You may have to remove the four nuts holding the seat down, remove the seat, and look for change, or debreas stuck in the track. Check the bearings, lubercate the track lightly. If the bearings are shot, or the frame/track is bent, you can try to pry it back, but it may be easier to purchase a new seat.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Push rod diagram


Exhaust push rods are longer
  • 6.0740 Inch Overall Length
  • Standard Size
  • Intake valves are
  • 5.7460 Inch Overall Length
  • Standard Size. Front head.
front head standing in front of car passenger to driver side
Ex , in ,in Ex ,in Ex

rear head standing in front of car passenger to driver side
Ex. ,In , Ex , In , In , Ex

remember exhaust push rods are longer
Rocker arm bolt ................................ 124 lb. in.plus 30 degrees

Apr 21, 2014 | 1999 Pontiac Grand Am GT

1 Answer

My daughter's 2005 grand prix will not start. How can she get in the trunk to get to her jumper cables because the key fob won't work to open the trunk and the inside trunk release won't work...


In your situation I think your best bet is going to be taking out the back seat. Luckily this is very easy and will allow you easy access to your truck and jumper cables. Okay in order to remove the back seat you will have to have a socket set. There should be 2 bolts holding the bottom of the seat down and you can find them on the floor on the front part of the rear seat. One bolt on the driver side and one bolt on the passenger side. After you get those bolts out you should be able to remove the bottom section of the seat. If you can not look for two more bolts on the back part of the seat. You will have to look between the back of the seat and the bottom part. After you take those two bolts out both parts of the seat should be free and you can remove them. I hope this helps.

Aug 25, 2011 | 2005 Pontiac Grand Prix

1 Answer

I just need to take out my rear seat and rear passenger side plastic panneling to access the other side of passenger rear quater pannel


The seats should have a couple of bolts one on each side of the car, they are on the inside where the front of the seat meets the floor, sometimes they are partially hidden as the seat cushioning drops down over them. Remove both the bolts and then pick the front of the seat up and slide the back forward then work the seat belts through the seat. The panel should just gently pry off, try one corner gently to get it started, if it doesn't act as if it wants to budge then stop and inquire more in depth information on it.

Jun 10, 2011 | 2003 Chevrolet Monte Carlo

2 Answers

How do you take out the front seats on a 2004 grand prix gt?


You will need to crawl under the vehicle. The bolts holding them down are located there. You may need two people. One to hold the bolt secure insde the car and one to turn the bolt from underneith. There maybe as many as 6 bolts per seat. I am assuming these are bucket style seats. Tell me how it turns out, Raz

Apr 18, 2010 | 2004 Pontiac Grand Prix

1 Answer

How many passengers does the 2001 Pontiac Aztec hold?


The answer is this: Any car is rated to hold only so many people as it has factory-installed seat belts for.
For your car, it depends on whether it has front bucket seats. Count the seat belts.

Feb 20, 2010 | 2001 Pontiac Aztek

1 Answer

2000 Pontiac Grand Prix Passenger Side rear view mirror


As the owner of a 2001 Grand Prix GTP I can tell you that the mirror you speak of is not terribly difficult to replace, but you need the tools to remove the inside panels in the front corner of the window to get to it. Once you get that off there should be three bolts/nuts that hold the mirror on and if you have power mirrors then of course you'll have an electrical connector in there as well.

I dont have any instructions wrote up but there is a Grand Prix car club forum you can check that may have some information on how to replace it in more detail. You can go to grandprixforums.net, sign up and post up your problem and Im sure someone there will probably have specific instructions.

Dec 31, 2008 | 2000 Pontiac Grand Prix

2 Answers

Removing front and back speakers in 1991 Grand Am....


There is a lot involved in replacing these speakers. You should also know that the original factory speakers are 10 ohm speakers. This means that if you replace them with new speakers (most of which are 4 ohm) you run the risk of damaging the stereo, the speakers, or both. This can also cause a potential fire hazard in your car. If you want new speakers, you really should look at installing a new stereo as well.

To get to the back speakers, you will need to remove 2 bolts located under the front edge of the rear seat (bottom). After you remove the bottom, you will need to remove the rear seat (back). This involves removing the bolts that hold down the rear seat belts, which is a large sized torx bit (T-45, T-47, or T-50... Don't remember which). After removing these, lift straight up on the seat back to remove. Now remove the deck brake light housing, and the bracket that holds it. Now the deck cover can be removed. Be careful not to bend it too much getting it out from under the side trim on both sides.

For the front speakers, you must disassemble a good portion of the dash. Remove the screw holding the light switch and the wiper switch housings. This screw is underneath each housing. Once removed, there are dash mounting screws behind them. These screws (and many of the other dash screws) are a smaller torx-bit (T-10 or T-15, don't remember which). Sometimes they use a 7mm bolt. There is a cover panel just above the glove box. This panel is held on with 2 screws located in the glove box. After removing this panel, you will find 2 or 3 bolts holding on the dash. Last but not least, you will find 2 bolts inside each of the defroster vent grilles. These grilles just snap out for easier access to the bolts.

1991 Pontiac Grand Am Car Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger: Pink
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 4" Round
Car Audio Front Speakers Location: In Dash
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: 6" x 9" Oval
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Nov 30, 2008 | 1991 Pontiac Grand Am

2 Answers

Heated seats are not working but light is on


Sounds like the same problem I had. I brought it to the Jeep dealer and they told me that the heating element in the seat stopped working. They told me that the only way to repair was to take the seat apart and replace the heating element in the seat. Of course they will charge you the standard $80 to tell you this. and then quote you $500 plus to repair. I can't even remember how much, I have decided it was not worth it.
Also this website could help you:
http://www.wjjeeps.com/seats/seats.htm

Oct 31, 2008 | 2001 Jeep Grand Cherokee

1 Answer

Middle seat selt belt 99 caravan


it is bolted to the seat frame you have to remove the bolt and nut. it's a torx bit size #60 and a metric wrench size 15 mm that you will need. please rate the solution...thanks

Sep 26, 2008 | 2000 Dodge Grand Caravan

1 Answer

2001 jeep grand cherokee seat removal


i actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage

Jul 05, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...