Question about 1996 Ford Ranger SuperCab

1 Answer

1996 ford ranger, automatic trans, Torque converter will not unlock at times (50%) trans has very harsh upshifts as well. 3.0 L engine with f speed overdrive

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 63 Answers

Im not sure about the fan Try spraying the heck out of the entire assembly on the drivers side of the tranny with PB Blaster and as for hard shifts is it manual or auto? if auto change filter

Posted on May 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 jeep codes p0743,p0740


Go here - www.jeepforum.com/forum/f11/tech-faq-links-tsbs-89273/ - and find the AW-4 Service and Diagnostic Manual. Looks like you need to test some solenoids.

P0740 (M)Torq Con Clutch, No RPM Drop at Lockup. Relationship between engineicon1.png and vehicleicon1.png speeds indicated failure of torqueicon1.png convertor clutch lock-up system (TCC/PTU solenoid)
P0743 (M)Torque Converter Clutch Solenoid/ Trans Relay Circuits. An open or shorted condition detected in the torque convertor clutch (part throttle unlock) solenoid control circuit. Shift solenoid C electrical fault - Asin transmissionicon1.png
P0743 (M)Torque Converter Clutch Solenoid/ Trans Relay Circuits. An open or shorted condition detected in the torque convertor part throttle unlock solenoid control circuit (3 or 4-speedicon1.png autoicon1.png. trans. only).__________________
.
Rather than banning scary looking black semi-automatic sporting firearms, why don't we
identify and treat the nut jobs pulling the triggers, and put the criminals in jail ?

Feb 11, 2013 | 1996 Plymouth Voyager

1 Answer

How many gallons whould it take to fill up a 4x4 ford ranger 1996 auto trans 4.0


Assuming you are talking about a 4r55e tran
with the 4x4 deep tran pan.
and the tran was rebuild with new torque converter
about 2 gal 8qt

Jan 21, 2011 | 1992 Ford Ranger

2 Answers

02 ford explorer scan tool shows code p0741 whats the fix for that code


Without diagnosing this problem i can only take a good guess, the po741 on this ford is related to the tcc, this is the torque converter clutch, the converter clutch seliniod may be bad, you will need to test it and omh it and check for shorts or open circuit in the seliniod.

Jul 05, 2010 | Cars & Trucks

3 Answers

P1870 code what does it mean


This GM service bulliten might apply to your vehicle:

TSB # 01-07-30-023A
Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
1996 Buick Roadmaster
1996 Cadillac Fleetwood
1996-2000 S10 Blazer
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 1999 (Julian Date 9015)
This bulletin is being revised to update the Parts Information

Please discard Corporate Bulletin Number 01-07-30-023 (Section 07 -- Transmission/Transaxle).
Condition
Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.
Diagnosis
Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.
The scan tool may show a DTC P1870 set as a history code.
A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).
Cause
The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply

Important
DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).

When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).
Correction
Install a control valve body with the revised TCC regulator and isolator valves. These valves are used in all transmissions produced after January 15, 1999 (Julian Date 9015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important
If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.

Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
The torque converter is not blue or overheated.
The transmission fluid is not burned or has no burned odor.
The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments

Jun 18, 2010 | 1998 GMC Jimmy

1 Answer

Transmission flares


NO: 43-37
DATE: 2-25-2003
MODEL: MY 2001-2002 S60, V70, V70 XC
SUBJECT: Shift Quality Issues due to B4 Servo Cover Failure, 2-3 upshift harshness or flare
CHASSIS: These chassis breaks are approximate:
S60: 062000-152000
V70: 116000-230000
V70 XC: 036000-067100
TRANSMISSION SERIAL NUMBER: The first 3 digits of the serial number on the affected transmissions will be between 01C (March 2001) and 01L (December 2001).
DESCRIPTION:
In the AW 55-50, brake number four (B4), is only applied in 3rd gear. The B4 is applied by a piston, which is covered by an aluminum cap. This cap has a steel washer crimped to its inside surface, and a rubber cushion that sits between the cover and the washer.
If this washer breaks free from the crimps it will become concaved because of the B4 piston return spring pressure.
This loose washer can cause: - " 2-3 upshift flare / slip - " Harsh 2-3 upshifts - " 3-4 upshift flare / slip - " Harsh 4-3 downshifts
Replacing the broken B4 cover with a new one (PN 30651771) will remedy these symptoms.

Feb 04, 2010 | 2002 Volvo S60

4 Answers

Does the 3.0l transmission fit on the 4.0l engine


Hiya,

There are 5 automatic transmissions used in the Ford Ranger, Explorer and Mountaineer. They may be identified by checking the transmission code on the Safety Standard Certification Label attached to the driver's side door post, in the space marked Trans. The transmissions can also be identified by a tag attached to the lower left hand extension attaching bolt. The transmission codes are as follows:
  • 1991–94 code T is for the A4LD transmission
  • 1995–99 code T is for the 4R44E (2.3L, 2.5L & 3.0L) or 4R55E (4.0L) transmission
  • 1996–99 code U is for the 4R70W (5.0L) transmission
  • 1997–99 code D is for the 5R55E (5-speed automatic) transmission
So, what you need to do now is...establish from a FORD workshop, whether both the A4LD and 4R55E transmissions share the same components and mounting dimensions.

Cheers,

Scott

Nov 12, 2009 | 1992 Ford Ranger

2 Answers

1991 Ford Ranger starts but stalla when in gear.


if it is an automatic the torque convertor could be locked up.

Aug 31, 2009 | 1991 Ford Ranger Supercab

1 Answer

2001 ESPACE 2.0L AUTO NO REVERSE HELP PLEASE


your trans has lectronic controls to operate the shifting of your trans. If there is a defect, a fault code will be stored in the computer, called a DTC. You need to have someone with a scan tool check for the fault code. It is likely a solenoid that is not working or stuck.

Get the codes first. Autozone can run the test for free on engines, maybe trans codes too. Call your local Autozone or big parts store and ask them.

----------
SECTION 307-01: Automatic Transaxle/Transmission 2001 Escape Workshop Manual
DESCRIPTION AND OPERATION Transaxle Description The CD4E automatic transaxle is a four-speed, front wheel drive automatic transaxle with electronic controls for:
  • Electronic pressure control (EPC) solenoid for shift quality.
  • Shift scheduling.
  • 3-2 shift timing.
  • Coast braking.
  • Torque converter clutch control.
The transaxle features a four element torque converter with a torque clutch and a geartrain that includes:
  • Compound planetary gearset.
  • Chain drive.
  • Planetary gearset final drive.
  • Pinion and side gear differential.
The hydraulic control system of the transaxle has five solenoids that control:
  • Shift feel, through line pressure control.
  • Shift scheduling, through shift valve positioning control.
  • Modulated application of the torque converter clutch.
  • Timing of 3-2 shifts.
  • Engine braking during coast operation.
----------------------------
Solenoid Valve Body Assembly The solenoid valve body assembly contains the transmission fluid temperature sensor (TFT) sensor, as well as five PCM controlled output devices:
  • Electronic pressure control (EPC) solenoid.
  • Shift solenoid A (SSA).
  • Shift solenoid B (SSB).
  • 3-2 timing/coast clutch solenoid (3-2 T/CCS).
  • Torque converter clutch (TCC) solenoid.
---------------------------------
You may need your PCM, Powertrain Control Module reflashed by a Ford Dealer.
Try disconnecting your battery for 1/2 hour and then reconnect and see what happens. It will run a little rough and shfit hard until it relearns your engine/trans characteristics.
Let us know results of tests and DTC codes if you get them.

May 04, 2009 | Renault Sportwagon Cars & Trucks

1 Answer

The green overdrive light on the dash keeps flashing and the transmission jerks into gear. Any suggestions on how to solve this. The test codes that come are P1747, PO156, and PO161. I have already...


not an oxygen sensor



vehicle speed sensor or oss is most likely cause.


Output Shaft Speed Sensor (OSS) 7H103: The output shaft speed (OSS) sensor is a magnetic pickup, located at the output shaft ring gear that sends a signal to the powertrain control module to indicate transmission output shaft speed. The powertrain control module uses this signal for torque converter clutch control, shift scheduling, used in determining EPC pressure. Symptoms: No converter engagements, harsh shifts, abnormal shift schedules. DTC: P0720, P0721 std~us~en~file=d14110a.gif~gen~ref.gif


Vehicle Speed Sensor (VSS) 9E731: The vehicle speed sensor is a magnetic pickup that sends a signal to the powertrain control module. This VSS signal tells the PCM vehicle speed. The PCM uses this signal to modify upshift schedules. Symptoms: Shift engagement/disengagement (hunting) on grades. DTC: P0500, P0503, P1500, P1501, P1503

Mar 15, 2009 | 1996 Ford Thunderbird LX

1 Answer

4L80E trans harsh and late upshifts


Found trans to be a mis build,, had a rear planetary with no reluctor ring for the output speed sensor ,, sensor was picking up a false signal from moving internals. This caused a gear ratio error, wich defaulted the trans and was not contolling the pressure, default pressure went high causing late and harsh shifts .

Feb 10, 2009 | 1996 GMC Suburban

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...