Question about 2003 Chrysler Sebring

1 Answer

02 seabring randomly will not rev higher than 3000rpm in any gear check engine light follows seconds la ter. As well a brief shutter before the issue begins. If I turn the engine off and on the issue stops imdidently and the check engine light turns off within an hour

Posted by on

  • ianbowman Apr 30, 2010

    Ill scan it tonight I don't have my scanner on me.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Sounds like the engine is going into limp mode for whatever reason. You need to have the ECU scanned with an OBD2 scan tool in order to make an intelligent diagnosis of the problem. This tool will retrieve the code that has been set by the ECU. That code will tell you what part is being effected but not necessarily the defective part. It can be the throttle position sensor (TPS) or some other things. Without that code it would just be a guess and throwing parts at the problem is not the way to fix it. Some auto parts stores like Advance & Auto Zone will scan your ECU for free. Once you get the code post back here and I will try to help more, or take it to a skilled, qualified, technician for diagnosis and repair.

Posted on Apr 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 venture, when out of gear I rev the engine and at 3000rpm the engine start cutting out, power then no power,in 1/2 second intervals. It loses more power as you try to accelerate.


Don't have a lot of experience with this model , but , sounds like rev limiter is engaging because computer believes vehicle not moving maybe ?
Is speedo working if electric ? if speedo geared then is speed sensor bad , I have seen that before .
Hugh

Mar 10, 2017 | 1998 Chevrolet Venture

2 Answers

Holden rodeo 2003, wont rev over 3000rpm


run a scanner on the system to determine codes to diagnos problem

Apr 13, 2014 | 2003 Isuzu Rodeo

1 Answer

My car is in Drive but does not go above 2nd Gear? What is wrong with it. Saurn Sl '93


Who care about the Service soon light,since you stated you are a 1993 you are OBD 1,this is not a bad thing but if you pulled a code it would probable read 02 lean bank 1, The real problem is the whole transmission,Wont rev higher in other word its slipping,need to rev higher just to start moving ,well its slipping the solution is a rebuilt transmission,or a better car.

Nov 23, 2012 | 1993 Saturn SL

1 Answer

Shifting in higher gears


For Automatic transmission problem,Check the list of help links below.click the link below:----Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 09, 2012 | 2000 Isuzu Rodeo

1 Answer

2007 yaris 90,000ks. While idling the car starts shuttering randomly and the rpm goes up and down as my foot is on the break. Sometimes the engine revs by itself and the car returns to normal but it has...


Check the following for:
- Vacuum leak.
- Intake manifold gasket/ seal leak.
- Throttle body seal leak.
- Check Valve clearance.
- Electronic throttle control system.
- ECM power source circuit.

Dec 29, 2011 | 2007 Toyota Yaris

1 Answer

I have a 2006 chrysler pacifica. The engine light is on. It has gone off after i have put in super high test gas. Gas mileage is poor. When I try to rev it up in park it won't go over about 3000rpm. ...


My thoughts on your problem. First when you rev it up in park it shouldn't go over 3000 rpm the computer wont let it. Did you have the check engine light read to see what the code is? when you say the gas mileage is poor are you comparing it to what it once was? As far as the miss goes is it a constant miss or a random miss? if you could answer these questions I should be able to help you further

Apr 25, 2011 | 2006 Chrysler Pacifica

1 Answer

P0735 relacion incorrecta gear 5 vw bora 2006 solucion


P0735 VOLKSWAGEN - Gear 5 Incorrect Ratio
P0735 se detecta cuando A / T no se puede desplazar a la posición 5 ª marcha incluso si el circuito eléctrico es bueno.

Notas técnicas
Empieza por inspeccionar el nivel de líquido de la transmisión y el estado, y el líquido cambia si es necesario.

Este diagnóstico monitores de la posición real del engranaje de control de la relación de deslizamiento del convertidor de par calculado por el Módulo de Control de Transmisión (TCM) de la siguiente manera:
Convertidor de par deslizamiento ratio = A x C / B

R: El eje de salida de la señal revolución de la revolución del sensor
B: Motor de la señal de velocidad del motor del módulo de control (ECM)
C: Relación de cambio fijado en la posición del engranaje que supone la medicina tradicional china

Si la posición real del engranaje es más alto que la posición (5 º) supone por TCM, la proporción de deslizamiento será más de lo normal. En caso de que la relación es superior al valor especificado, los jueces TCM este mal funcionamiento diagnóstico.

Los síntomas:
- A la luz del motor (o motor del servicio pronto luz de advertencia)
- Cambios de la transmisión incorrecta

Posibles causas:
- La transmisión de bajo nivel de líquido
- Dirty líquido de la transmisión
- Turno de solenoides
- Problemas de transmisión mecánica
- Transmisión del circuito de control hidráulico

Espero que esto le ayude. Por si acaso, adjunto el detalle en ingles original.

Suerte.

P0735 is detected when A/T cannot be shifted to the 5th gear position even if electrical circuit is good.

Tech Notes
Start by inspecting the transmission fluid level and condition, and change fluid if necessary.

This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:
Torque converter slip ratio = A x C/B

A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes

If the actual gear position is higher than the position (5th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Incorrect transmission shifting

Possible Causes:
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit

Mar 11, 2011 | Volkswagen Passat Cars & Trucks

1 Answer

Idels fine when driving it sometimes loses power and stalls if you rev the idel above 3000rpm it stops and runs fine till you stop or slow down the idel below 3000 rpm it shutters and...


If you don't have a check engine light, Start with the air and fuel filter, work your way up to a tune up. Clean the throttle body as best you can on the inside, behind the throttle plate/s

Feb 24, 2011 | Honda Accord Cars & Trucks

1 Answer

My 1998 Cabrio engine keeps cutting out, if I hit 3000rpm in first it cuts, 2000 rpm in second it cuts, 1500rpm in third it cuts. Either it cuts or goes completely dead. Any ideas? I heard it can be the 02...


Fuel pressure problem, O2 does not send info to ECM during accelaration so cant be that, catalytic converter doesn't cause check engine light to come on, try changing fuel filters

Feb 16, 2011 | 1998 Volkswagen Golf

2 Answers

NO POWER, HAD A RANDOM MISFIRE AND REPLACED COIL PACK AND PLUGS. CHK ENGINE LIGHT WENT OUT FOR MIISFIRE, BUT VEHICLE FEELS AS THOUH CAT IS CLOGGED.


CAT would only get clogged if you were burning a lot of oil, is the tail pipe really black?
Run a compression check on the cylinders.
What condition were the plugs in when you removed them? They will help you trace the source of the problem. Local parts houses will run the diagnostics for you at their location if you can drive it there.

Aug 26, 2009 | 2004 Jeep Wrangler

Not finding what you are looking for?
2003 Chrysler Sebring Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...