Question about 2005 Ford Mustang

2 Answers

I dont know in what order my spark plug wires hooked up.

Posted by on

  • yadayada
    yadayada May 11, 2010

    what engine do u have?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Chec here the MUSTANG FIRING ORDER

Below are the firing orders for 5.0L, 4.6L, 3.8L, and 2.3L late model Mustangs. Remember to be very careful when checking your firing order because the ignition system on your car runs on very high voltage. Do not remove spark plug wires from the distributor or spark plugs while the engine is running.
Firing order sequences:
V8's 1-3-7-2-6-5-4-8
V6's 1-4-2-5-3-6
2.3L 1-3-4-2

i dont know in what order my spark plug wires - bcd56b8.jpg


Hope this help (remember comment and rated this) TY for using Fixya.

Posted on Apr 30, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 189 Answers

Call autozone,and give them your engine size and they can tell you ovethe phone. or look on theintake manifold,and you will find the firing order cast into it.also on the manufacturers sticker on the undersideof the hood.

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Did tune up now wont start


what do you mean by dirty is it fuel fouled or oil?

Feb 25, 2013 | 1991 Chevrolet S-10

1 Answer

Installing Spark plug wires


Unless the wires were removed the firing order cannot change as also the length of the wires do not permit that the wires switch over.
All what is needed is to check the spark at each plug , if of low internsity check the ignition system including the HT coil. Also the fuel filter and the fuel pump for the right pressure.

Nov 22, 2011 | 1996 Honda Accord

1 Answer

Dont know if wires are hooked up correct from distributor to spark plugs.


Hello! I'll need the year, model and engine size of your Ford in order to answer your question...

Guru.....Saailer

Sep 01, 2011 | Ford F-250 Cars & Trucks

2 Answers

How do you properly replace spark plugs in a 96 dodge stratus?


pull off plug grabbing it as close to spark plug as you can. Using socket rotate counterclockwise and remove plug. Be careful putting plugs back in and thread by hand first. Then torque as plug box says as it depends on if you have a washer or not.

Dec 22, 2010 | 1996 Dodge Stratus

1 Answer

Spark plug wiring diagram


If u can't see the diagram go to the link, just match up the numbers on the coil to the engine cylinder numbers.

http://autorepair.about.com/library/firing_orders/bl-fo-5630.htm


b0edffd.gif

Apr 05, 2010 | 1997 Pontiac Trans Sport

2 Answers

Need to locate the Spark plugs ?


look at the distributer and follow the spark plug wires from it out to each spark plug but each wire as u pull them. dont take all off at once . or u might not know how to hook them all back the right way.

Feb 01, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

I hooked up the spark plug wires wrong on the distrator cap it is a 1988 4.3L 6cyl how can i find a diagram to fix this problem or tell me hoe to fix it


find the firing order which is usually on the intake manifold,put the crankshaft on 0 degrees top dead center,pull off the distributor cap and mark where the rotor button is pointing,start #1 cylinder at that spot(which that spot should be pointing towards the rear of the distributor),and # 1 cylinder is front of engine on the drivers side then it goes next 1 back #3 then # 5,and the passengers side front is #2, then #4,then #6 towards the back,and the firing order goes clockwise on the distributor.if it spits and sputters or back fires,then the timing firing order is off 180 degrees,so move every wire to the exact opposite on the cap,so your #1 plug wire will be opposite from where you put it first.then double check the firing order and all plug wires then try it.the firing order is:165432,i still dont know how to send pictures.

Sep 07, 2009 | 1988 Chevrolet K1500

1 Answer

Firing order


If you pulled all the wires at once, you will need to go to a parts store and see if they can show you a diagram on how to reset the wires. Do not unhook the wires from the spark plugs at this point.

Feb 14, 2009 | 1987 GMC VanDura

2 Answers

Ihave changed the spark plugs but i dont know if put the caps in


Not sure what you're asking. The only order that matters is the order of the spark plug wires. There isn't an order for the spark plugs themselves. So are u looking for the order of the spark plug wires?

Nov 12, 2008 | Honda Civic Cars & Trucks

Not finding what you are looking for?
2005 Ford Mustang Logo

422 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...