Question about 1999 Chevrolet S-10 Pickup

1 Answer

How do you change a water pump on a 1999 s-10 blazer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 189 Answers

Remove the radiator shroud and radiator. remove the cooling fan. loosen tensioner and remove serpentine belt. unbolt the water pump and remove. installation is reverse .

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 Blazer Replaced heater core now water pump is squealing and seems like low circulation


my 98 Blazer I had to replace radiator water pump heatercore and hoses. Had head gasket go. Once that happens air and dexcool corrode cooling system. Do you smell antifreeze? Are you loosing antifreeze? Check oil see if its another color not clear or black but i think light brown. Have you flushed out system?

Jan 31, 2013 | 2001 Chevrolet Blazer

1 Answer

Overheating problems for 1987 chevy K5 Blazer


Is it possible the replacement engine has a water pump that turns the opposite direction from the original ?
The thermostat has to be open to allow flow thru the radiator, have you tried running without a thermostat to check flow ?

Jul 24, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

Have water leak changed radiator, water pump and hoses still leaks


water pump bearing not turning stop now or get reday for mojor engin repear , the head is going to blow.

Mar 14, 2012 | 1998 Chevrolet Blazer

1 Answer

Have a 1991 s10 blazer have changed plugs, distubutor cap, magmetic pickup coll, an all the parts in it have been checked, new timing chain an gears an it is still missing an backfiring could the water...


no...water pumps do not cause backfires. faulty water pumps causes overheating.

backfiring is caused by incorrect firing order. the connection of your high tension wires are wrong

Aug 12, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

I need to change out a water pump on my 92 full size blazer.


u might be able to just remove alt and fan and maybe not. Only other things that might needed to removed is a/c compresser, power steering pump and fan shroud (((you dont have to remove shroud but makes it alot easier)))

look at water pump and look to see what all in way of getting to all the bolts

Apr 07, 2010 | 1992 Chevrolet S-10 Blazer

1 Answer

I need to change the water pump and I need to know the proper way to do it for a 1997 Chevy Blazer LS 4.3 litre.


First you need to drain down the coolant, secound take top of fan shrould off 2#10 bolts on each side, third loosen fan bolts, fourth take belt off, fifth take fan off, sixth unbolt anything that is bolted to water pump like power steering pump, maybe ac. pump heater hoses ect. last take 4 bolts out that hold water pump to block 2 on each side and thats it. Clean old gasgets off engine block and bolt on new pump with new gasgets witch will come with new pump. Put back to gether in reverse order.

Nov 22, 2009 | 1997 Chevrolet Blazer

1 Answer

How to change a water pump?


You will need to remove the upper fan shroud, remove the fan clutch that is threaded onto the water pump it is easiest to get the tool for this or you can use a bar between two of the pulley bolts and use a cresent wrench on the big nut. After you remove the fan clutch there is the small hoses on the top of the water pump and the lower hose on the bottom of pump. Then there are only four bolts holding the pump to the motor. Reinstall in reverse order. Let me know if you need more help.

Jan 06, 2009 | 1999 Chevrolet Blazer

1 Answer

2001chevy blazer


it is not to hard to change the pump but you will need a fan clutch tool. the water pump is on the front of the motor with the fan attached to it.

Dec 02, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet S-10 Pickup Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...