Question about 1994 Jeep Wrangler

1 Answer

On a 94 Jeep YJ 2.5 what order do the spark plug wires go to the plugs off the distributor cap?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

On a 94 Jeep YJ 2.5 what order do the spark plug - cdc7759.gif
Number 3 and number 1 cylinders are marked twice; Once on the wire and once on the distributor, but they are the same location and same wire.

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a wiring diagram for spark plugs for a 1995 jeep Cherokee sport


V6 engine: firing order: 1 2 3 4 5 6, distributor rotates clockwise. Left bank of engine (driver's side), cylinders 2, 4, 6 (#2 at front of engine). Right bank: 1, 3, 5 (#1 at front of engine).
Inline 6 engine: firing order is 1-5-3-6-2-4. Distributor rotates clockwise.
The number one tower on the dist. cap should have a mark or numeral 1 on it. If not, turn crankshaft to top dead center of compression stroke on number one cylinder, the 0 degrees or "T" mark on the crank pulley pointer. If you are on the compression stroke (not the exhaust stroke), the rotor under the dist. cap will be pointing to the number one cylinder spark plug wire tower.

Mar 30, 2012 | 1995 Jeep Cherokee

2 Answers

Change my spark plugs and distrubutor cap and the 85 ranger want start


You may have got the spark plug wires out of sequence.
Reseat the coil wire going to the center of the distributor cap Check the spark plug wires at the distributor against the firing order as follows:
The spark plug firing order is 1 - 4 - 2 - 5 - 3 - 6 The distributor rotor turns CLOCKWISE The engine cylinders / spark plugs are numbered :
firewall 3 - 6 2 - 5 1 - 4 front
Best wishes,
TF

Jun 03, 2011 | 1985 Ford Ranger

1 Answer

2001 dodge ram 1500 5.2 v8 van spark plug diagram


firing order is 1 8 4 3 6 5 7 2 standing in front of truck. cylinders on passenger side facing you are 2 4 6 8 cylinders on driver side facing you are 1 3 5 7 now this is your spark plugs wires location on distributor cap.with distributor facing you.2 plugs wire on cap 6 oclock position 1 plug wire on cap 8 oclock position,8 plug wire on cap 9 oclock position,4plug wire cap 10 oclock position,3 plug wire on cap 12 oclock position,6 plug wire on cap 1 oclock position, 5 plug wire on cap 3 oclock position, and 7 plug wire on cap 5 oclock position. in order for this to work you must be standing facing the engine all plug wire location on cap should be correct.

Apr 08, 2011 | Dodge Ram 1500 Cars & Trucks

1 Answer

94 royal begis to cut out, chugs at about 55


Replace the spark plugs and wires along with a distributor cap and rotor. Be careful to leave the old wires and plug wires connected to dist.cap, just remove dist. cap from the distributor and lay aside with plug wires on it then install rotor then new cap and proceed to replace each wire for cap and spark plug one at a time so you don't mix up the spark plug wire firing order. Cap laying to the side is used for reference purpose.

Feb 26, 2010 | 1994 Oldsmobile 88

2 Answers

91 jeep yj wont start


check your coil, plugs, wires, basically your entire ignition system - test a plug wire by sticking a new (known to spark) sparkplug onto the end of the (known to work) wire and see if there is spark, if not, change out your coil and test again - if neither, check the timing of your distributor

Jan 28, 2010 | 1991 Jeep Wrangler

1 Answer

Need wiring digram from spark plugs to distributor cap


Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.

I really hope hepled with this (remember rated this help) Good luck.

Nov 18, 2009 | 1997 Jeep Grand Cherokee

3 Answers

Firing order diagram for 1998 Jeep Cherokee Sport


1998 Jeep Cherokee 4WD 4.0L MFI 6cyl

To avoid confusion, tag and remove the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.

3359c2a.jpg

Fig. 1: The firing order can usually be found cast onto the intake manifold

b83cce1.jpg

Fig.: 1989-98 2.5L engine Engine firing order: 1-3-4-2 Distributor rotation: Clockwise

15d7835.jpg

Fig.: 2.8L engine Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise

ee028ff.jpg

Fig.: 4.0L engine Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise

226e0b9.jpg

Fig.: 5.2L and 5.9L engines Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Also, here can review the Jeep XJ Service Manual.

I hope help you with this, Good luck (remember rated this help).

Oct 13, 2009 | Jeep Cherokee Cars & Trucks

1 Answer

Spark plug wire position on distributor cap


1-5-3-6-2-4
ALL Jeep 4.0 motors use this firing order. Any year, any model, high output or not.

Also, the spark plug wire placement on the cap, in a clockwise direction from the post nearest the engine block is: 6-2-4-1-5-3.(to the left side of the number 6 post, there should be a hold downscrew or strap for fastening the distributor cap to the distributor.
For a picture diagram, please go to this website:
- http://www.fixya.com/cars/t2859850-need_spark_plug_wiring_1993_jeep_4l
- http://www.jeepz.com/forum/engine/16923-six-cylinder-4-0-liter-jeep-engine-specs.html

Good luck (rated this help)

Sep 06, 2009 | 1997 Jeep Grand Cherokee

1 Answer

I replaced my spark plug wires on my 1996 chevy truck. may have crossed one,need a diagram from the spark plugs to the distributer cap.


Since you didn't state whether it is a V6 or V8, I'll give you both.

V6 -4.3Liter
Firing Order is 1-6-5-4-3-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap, faces the front of the engine.

->Drivers side, spark plug order in engine, starting from the Front going back:
1-3-5
->Passenger side, spark plug order in engine,
starting from the Front going back:
2-4-6

If it's Electronic, the distributor cap has a Left side, (Drivers side), and a Right side, (Passenger side)
Starting from the Front, going back on the Left side,
3-1-5
Starting from the Front going back on the Right side,
2-4-6

V8-5.0, 5.7, and 7.4Liter
Firing Order is 1-8-4-3-6-5-7-2
Distributor rotor turns Clockwise
Number 1 spark plug tower on distributor cap,
faces Front, towards the Drivers side.

Electronic distributor cap has two sides. Drivers, (Left), side and Passenger, (Right), side.
Starting from Front going back on Drivers side,
1-7-3-5
Starting from Front going back on Passenger side,
8-2-4-6

Spark plug order in engine, starting from Front going back, Drivers side:
1-3-5-7
Spark plug order in engine, starting from Front going back, Passenger side:
2-4-6-8

Aug 28, 2009 | 1996 Chevrolet K1500

1 Answer

Need diagram for 1998 Jeep Cherokee sport spark plug wiring


hi, you didn't say what engine you have, I'll assume it's the 4.0 L in line 6 cylinder. Standing on the PASSENGER side of the jeep, the spark plug at the front of the engine is #1, the next is #2, and so on to #6 which is at the back (nearest the windshield).
The distributor is between you and the valve cover on the engine. Pretend the top of the distributor cap is the face of a clock.
The #1 spark plug wire goes in the cap at what would be the 6 o'clock position, (as viewed from your position standing on the passenger side, facing the side of the engine). The firing order direction is clockwise, so the 'hand' of the clock (actually the rotor in the cap) would continue to the next distributor cap plug in, which would be spark plug wire to #5 (8 o'clock position), then #3 (10 o'clock position), #6 (12 o'clock position), #2 (2 o'clock position), #4 (4 o'clock position). So all this means isi your firing order is, 1,5,3,6,2,4 If you have a different motor or any questions, let me know. Good Luck! countrycurt0

Aug 06, 2008 | 1996 Jeep Cherokee Country

Not finding what you are looking for?
1994 Jeep Wrangler Logo

Related Topics:

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...