Question about 2004 Lincoln Aviator

1 Answer

Replaced fuel pump, fuel filter, air filter and a sensor on the throttle body. when my truck is started once i press on the gas the truck cuts off. 2004 lincoln aviator

Posted by on

  • neecie May 01, 2010

    thanks for the advice but that still didn't work. but thanks anyways!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Sucking air from intake manifold or other vaccum leaks ..possibly check brake booster vac line ..just some possibilities

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have replaced my fuel pump, filter, throttle position sensor, and relay on my 1992 jimmy. it runs but everytime it hits idle speed it cuts off. what could that be


It should have an idle air control valve which lets air into the intake to control the idle speed. The valve could be faulty, or dirty, or the throttle body could be dirty. The computer opens and closes the valve to regulate idle speed.

Jul 16, 2012 | 1992 GMC Jimmy

1 Answer

The car had gotten a new fuel pump an new mass air flow sensor an the tb sensor. but it still is doing the samething but now when you push on the gas the milege meter does not read an as soon as you push...


its a fuel problem. check to see if fuel is reaching engine, its a possibility that your fuel filter is clogged up. spray starting fluid in throttle body and if engine runs then dies, its a fuel problem.

Oct 25, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

My car wont hold once gas is applied


I would look at both the throttle position sensor (TPS) and the Idle Air Control valve (IACV) associated with the throttle body. Determine that these are both functioning as they should before moving on with the search.

Jun 07, 2010 | 1993 Chevrolet Suburban

1 Answer

When i press accelerator engine is cutting ....


The van may just need a good tune up.

  • Replace the fuel filter
  • Replace the air filter
  • Replace the PVC valve
  • Replace Engine oil and filter
  • Replace the Spark plugs
  • Clean out the Throttle body with throttle body cleaner
  • Clean out the MAF sensor
This should help you get your van running 100% soon. If your on a tight budget, start with Cleaning the throttle body with spraying throttle body cleaner into the throttle body and cleaning up the MAF sensor with MAF sensor cleaner, just follow the instruction on the can. Then replace the PVC valve and add fuel injector cleaner in to the gas tank. This should help your engine running better and then you can do the rest of the work to complete the tune up. Good luck and keep me posted. If you go to Auto Zone, you can get all the things you need and they can scan your van for any DTC codes that may also indicate what issues your engine has.

Oct 22, 2009 | 1994 Pontiac Trans Sport

1 Answer

Fuel line or fuel filter location. The jeep wants to cut off and does not want to start unless I put the gas to the floor.


Your problem may be the reverse of what you are thinking...Putting it on the floor should add more air and lean it out. You may have a leaking injector. Before cold starting spray some carb cleaner into the throttle body. If it starts right up, then look at fuel pump or filter. If it takes longer to start, then look at injectors and map sensor. Air cleaner element is clean, correct?

Jul 18, 2009 | 1999 Jeep Cherokee

1 Answer

Cuts out when u give it gas all at once


vacuum leak at the air duct on throttle body or tps sensor.

May 25, 2009 | 1995 Dodge Neon

2 Answers

Issue with throttle control on my 2003 Maxima


I discovered that its the throttle body sensor. Its not sensing the postion of the foot pedal. The throttle body has a sensor that is linked to your gas pedal via a cable. The spring that the repair man mentioned could be the issue. The sensor then communicates to the computer the position and then computer then applies fuel, the mass air sensor then will communicate to the computer and the computer will then allow more or less air to fuel ratio. So if your stomping on the gas and there is not any response, then your throttle body sensor is most likely going out.

Nov 21, 2008 | 2003 Nissan Maxima

1 Answer

Car runs rough at idle and stalls when giving gas i replaced plugs,wires,throttle position senor,mass air flow sensor,fuel pump screen,and fuel filter


clean out ur throttle body, just follow the hose from the air filter to the throttle body. Need 2 people to do this. Don't remove the hose completely from the throttle body. Just enuff to be able to spray ur intake cleaner into the throttle body. Do this especially if its worse when the motor is hot, as this would confirm the problem.

Sep 04, 2008 | Lincoln Town Car Cars & Trucks

Not finding what you are looking for?
2004 Lincoln Aviator Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...