Question about 1999 Chevrolet Silverado 1500

1 Answer

Driver's inside door handle broke. How do I get

Driver's inside door handle broke. How do I get the door panel off to access the mechanism to repair it?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Found this while looking to replace speakers:

DOOR WITH POWER LOCKS AND WINDOWS First remove the triangle piece in the top corner of the panel (piece closest to the outside mirror). This can be done with a plain screwdriver and just a little
prying and it will snap off. Second, remove the door lock inset, same screwdriver, little prying and it snaps out. Next remove the cover inside the door handle, same screwdriver, pry and snaps out
(turn it upside down and slide it off. Now you will need to remove the cover that holds the window
and door lock buttons, same screwdriver and pry upwards just a little and should pop off. Ok now you
will need a small socket to take out three screws. One is inside the button panel you just took off,
the second is inside corner of the door arm, (the handle you grab to shut the door, look under it,,
see it yet, yeah thats it). The last screw in on the very bottom of the whole door panel, you will
have to get on your hands and knees to see this one (yeah thats it right there). Now would be a good
time to remove the door light on the corner, same screwdriver, pry from the red lens side outward,
once out, remove the wire termial. Ok.... now grab the under side of the panel where that last screw
was and lift upwards, apply a little more pressure till the panel pops upward about an inch. Now your
door panel is loose, you can lift it off a little but you will need to remove the wire from the tweeter.
The termial has a locking tab you need to press down to remove it.

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Hyundai Elantra SE - Driver side rear door won't open from the inside or outside.


You will need to remove the inside door panel, what that takes I don't know, but it must come off to access the door latch, there you will likely find the latch release control rod has come off or the latch is defective.

Jun 20, 2017 | Hyundai Cars & Trucks

1 Answer

Driver side door is jamed shut. ouside door handle and inside door handle broke. can't open door. how do i get the door open or can you take inside driver side door panel off with door closed?


i don't know about taking the panel off with the door closed, but you should be able to remove the inside handle. there should be just one screw holding it in it should be right in the middle usually it is covered with a plastic cap. once you get the handle off manually pull the mechanism and open the door.

Apr 18, 2011 | 1999 GMC Suburban

1 Answer

How do I fix the door/lock of my 1991 Acura Integra? I can only open the driver side door from the outside


There are only 2 places that you have the problem on the inside door handle. one is at the handle,and the little plastic holder that holds the rod to the handle broke, or the plastic clip the the door lock mechanism broke. the first can be removed without taking the door apart. the inside door handle has a screw holding it in place. you can remove the handle and see if its broken. the second requires you to remove the door panel, to replace the clip that hold the rod to the lock. I door handle in the car is a dealer item only(sorry to tell you that), the clip for the lock, you can get at the auto parts store. hope this helps

Jan 11, 2011 | 1991 Acura Integra Hatchback

1 Answer

My out side door handle on the driver side came loose 2007 danali


It most likly broke inside. You will have to remove interior door panel to access all the bolts and rods to replace it.

Feb 10, 2010 | 2007 GMC Yukon XL Denali

1 Answer

Driver side door wont open from outside


Fortunately, it means that the mechanicals of the door opening device are working right, if you can open from the inside. The rigid wire that connects the outside handle to the door opening mechanism became loose, or a plastic connector broke. Disassemble the door panel, reach the handle from the inside, and see if there is a thin rod dangling somewhere, and if not broken, just put it back in place.

Jan 10, 2010 | 2008 Audi Q7

1 Answer

2005 volvo s60 inside door latch broke


That is not true.
The handle fell off on the inside. You can remove all the screws, remove window and lock controls. Then take a large flat-tipped screwdriver gently pry off door panel. Pull up and off when loose. You will now have access to inside off door and put the rod back in the handle hole. If the plastic holder piece is broke you will need another one. Cheap.


Oct 01, 2009 | 2002 Volvo V70

1 Answer

Handle on rear hatch door broke off.how can i open hatch door until i can get a new handle?


you don't. take it into a Hyndai Dealership and have the handle repaired/replaced. The rear hatch panel/cover has to be removed (from inside the vehicle) to access the hatch latch and open the door.. from that point the handle can be replaced/repaired.

May 24, 2009 | 2003 Hyundai Santa Fe

2 Answers

Mazda 5 replacing external handle on sliding door


Your door should be held on with clips. Removing the panel is sometimes hard, just take a good WIDE flat head screwdriver, and whatever tool needed to remove the screws holding the panel on, and be careful. Check underneath the panel, by the inside handle, and the arm point for screws. Once removed, take your WIDE screw driver, and don't quite pry them off, more or less try to get it underneath and pull towards yourself. There is no real easy way, just try to be patient with it, and if you hit any binds, look for more screws, its just a matter of patience for sure.

Feb 13, 2009 | 2006 Mazda 5

1 Answer

2001 Nissan Quest - Broken Exterior Sliding Door Handle


you can do this. you have to remove inside trim panel for access. if you still need to do, I will send you repair steps. let me know

Oct 16, 2008 | 2001 Nissan Quest

1 Answer

Driver Door Latch Problem


sounds like you are the victim of the slim jim. what happened is the clip for linkage either broke or got knocked off. you have to remove door panel and repair/replace clip

Jul 26, 2008 | 2001 Toyota Sienna

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...