Question about 2006 Ford Expedition

1 Answer

2006 Ford Expedition Limited. Brake Shudder.

2006 Ford Expedition Limited.
New brakes & rotors fitted all 4 corners about a month ago. Alignment done 2 weeks ago. I get a shudder when I apply the brakes which gradually disappears as I reduce speed. Happens at all speeds. I was thinking front wheel bearings maybe. The truck has 102000 miles and is well maintained.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,095 Answers

Doesnt seem like bearings to me ,could be the ABS though ,i would need to drive it really to have any idea.Ask a local mechanic for a second opinion

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake shudder


If you did nor replace the attaching hardware when replacing the rear shoes and drums then there is a good chance that the rear brakes are not performing the self-adjustment necessary for them to work properly. This results in the rear brakes not braking effectively and placing extra stress of the front brakes. The increased stress on the front brakes causes excessive heat on the rotors and they will warp and this causes the shuddering you feel. Inspect the rear brakes to ensure that they are working as designed.

Nov 13, 2013 | 2007 Opel Corsa Utility

1 Answer

96 Thunderbird, soft brakes at slow speed otherwise brakes work just fine. All new pads. 2 new calipers and rotors 4 months ago, problem started last month. Could it be the master cylinder going?


Where the rubber brake flex hoses changed ?

Was all rust removed from caliper slides & all
moving parts lubed ?

Sounds like the job wasn't done quite right & then
there is still air in the system.

The wrong brake pads could be an issues also

The master should be okey, but should have been taken
apart & clean out the moisture around the piston

Aug 22, 2013 | Ford Thunderbird Cars & Trucks

1 Answer

I have a 2006 Dodge Charger Daytona R/T. What


O'reillyAutoParts Brake Best Select - Brake Pads Part Number: SM1057B Line: BB
  • Rear
  • Semi-Metallic Pads
  • Police Package
  • With Heavy Duty Brakes
  • Limited Lifetime Warranty Performance Friction - Brake Rotor Part Number: 348.067.01 Line: PFC
    • Police Package
    • Rear
    • Limited Lifetime Warranty $139.99 Each
Brake Best Select - Brake Pads Part Number: SM1058 Line: BB
  • Front
  • Semi-Metallic Pads
  • Police Package
  • Limited Lifetime Warranty
Performance Friction - Brake Rotor Part Number: 342.055.01 Line: PFC
  • Heavy Duty
  • Front
  • Limited Lifetime Warranty
$132.99 Each

Apr 29, 2010 | 2006 Dodge Charger

1 Answer

Emergency brake adjustment


I have a 2000 4x4 expedition and the parking brake has its own set of shoes. They are located behind the rear disc rotor. You have to remove them to get to the shoes. You will have to release the parking brake to get the rear rotors off.

Izap2

Jun 22, 2009 | 2000 Ford Expedition

1 Answer

I need to know the procedure for r and r on a front rotor if this is something that can be done at home with limited tools?


1999 Taurus/Sable Section 06-03: Brakes, Front Disc 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Disc Removal
  1. Raise vehicle on hoist.
  1. Remove wheel and tire assembly. Be careful to avoid damage or interference with caliper bleeder screw fitting and front disc brake rotor shield (2K004).
  1. ani_caut.gif CAUTION: Handle front disc brake rotor (1125) and disc brake caliper (2B120) assembly in such a way as to prevent deformation of front disc brake rotor , and nicking, scratching or contamination of brake linings/rotor surfaces.
    NOTE: To prevent damage, do not allow disc brake caliper to hang by the front brake hose (2078) .


    Remove caliper anchor plate bolts and discard. Position disc brake caliper out of the way. Prevent separation of caliper housing from anchor bracket because contamination of guide pin journals can occur.
  1. NOTE: If excessive force must be used during front disc brake rotor removal, the front disc brake rotor should be checked for runout prior to installation.


    If additional force is required to remove front disc brake rotor , apply Rust Penetrant and Inhibitor F2AZ-19A501-A or equivalent meeting Ford specification ESR-M99C56-A on front and rear rotor/hub mating surfaces. First, strike front disc brake rotor between lug bolts (1107) with a plastic hammer. If this does not work, attach 2-3 Jaw Puller 205-D027 (D80L-1013-A) or equivalent and remove front disc brake rotor . Remove front disc brake rotor from wheel hub (1104) assembly by pulling it off the lug bolts.
Installation
  1. If original front disc brake rotor is being installed, make sure rotor braking and mounting surfaces are clean.
  1. ani_caut.gif CAUTION: Failure to clean rust and foreign material from rotor and hub mounting faces when installing new or old front disc brake rotors will result in high rotor runout, which will speed up the development of brake roughness shudder vibration.
    Apply a small amount of Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification ESE-M1C171-A to pilot diameter of front disc brake rotor.
  1. Install front disc brake rotor on wheel hub assembly.
  1. Install disc brake caliper and new caliper anchor bracket bolts on front disc brake rotor . Tighten caliper anchor bracket bolts to 88-118 Nm (65-87 lb-ft).
  1. ani_caut.gif CAUTION: Failure to tighten lug nuts (1012) in a star pattern may result in high rotor runout, which will speed up the development of brake roughness, shudder and vibration.
    Install wheel and tire assembly on vehicle. Tighten lug nuts to 115-142 Nm (85-104 lb-ft) using Rotunda Accutorq® Lug Nut Socket 164-R0303 or equivalent on a 1/2 inch air impact wrench, or use a torque wrench.
  1. Lower vehicle.
  1. Pump brake pedal prior to moving vehicle to position brake linings.
  1. Road test vehicle.









May 25, 2009 | 1999 Mercury Sable

1 Answer

Brake shudder on ford focus diesel 2002.


did you have them change the rotors too ? even brand new ones out of the box often require turning (machining). replace the pads and rotors and go easy on the brakes for the first little while

Mar 18, 2009 | 2002 Ford SVT Focus

1 Answer

2006 Ford F-150 Suprecrew 5.4L 3V Brake Shutter/Shake


you need to have rotors machined on the truck. Can have no more than .003 runout after machining. Off car lathe can not do that.

More than .003 run out will result in rotor thickness variation and shudder as the variatons pass through the camped brake pads.

I workd on this industry probelm in 1989 when suspensions became too sensitive to runout and thickness variation.

Find a dealer or shop with on car equipment.

Mar 11, 2009 | 2006 Ford F-150

1 Answer

My 03 expedition shakes when i slow down,mostly on the right side.is this my rotors or front end alignment


your rotor either need to be turned or replaced.also have your brake pads checked.

Feb 22, 2009 | 2003 Ford Expedition

Not finding what you are looking for?
2006 Ford Expedition Logo

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...