Question about 2003 GMC Envoy

2 Answers

2003 gmc envoy!!! Need help asap! For the last

2003 gmc envoy!!! Need help asap! For the last few weeks my abs emergency brake light would come on and off while I was driving for no reason...then a few days ago when it came on my car just turned off then I would restart it and it would do it again moments later! I put gas in it and it ran for about 10 15 miles ok then it did it again!!!!

Posted by on

  • 1 more comment 
  • rob_hiltbrun Apr 30, 2010

    why?

  • yadayada
    yadayada May 11, 2010

    2003 gmc envoy!!! Need help asap! For the last few weeks my abs emergency brake light would come on and off while I was driving for no reason...then a few days ago when it came on my car just turned off then I would restart it and it would do it again moments later! I put gas in it and it ran for about 10 15 miles ok then it did it again!!!!

  • yadayada
    yadayada May 11, 2010

    time for a trip to the chevy delaer.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Trying changing the wheel hub I had the same problem on my envoy

Posted on Jun 25, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

Ask a garage to reset your computer, could be a recurring trip fault causing the car to shut down.

Clearing it might solve the problem - if not, the fault codes will tell you what the problem is!

Posted on May 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the tail light fuse?


The tail light fuse is under the rear seat on the drivers side.

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

Why is emergency brake light on with continuous "dinging"?


The emergency brake switch is most likely the cause of your problem. It is on the side of the brake pedal. Some you can adjust the position to where it shows the emergency brake pedal is not depressed. Here is an image of the switch..Hope that solves your problem

25872885-lssthgpi25gedqz0c32oowfn-2-0.png

Sep 19, 2015 | 2003 GMC Envoy

2 Answers

2003 gmc envoy emergency brake light is on and there's a ding ding ding ding nouse. checked brake fluid. How do I stop the Noise or fix it


the noise is telling you the emergency brake is on (or it thinks it is) emergency brakes don't use any fluids as they are totally mechanical on your truck , id first try setting the brake and then releasing it again , if this still doesn't clear the light on then id have your mechanic look at it , might require an adjustment

id be cautious in driving it if theres any possibility that brake is dragging as this will severely overheat your brakes requiring you to replace them early

Sep 17, 2015 | GMC Cars & Trucks

2 Answers

The brake and abs light just came on in my 2003 GMC envoy 4x4 what would cause it and where to start looking


Fist pull the code from your onboard computer with a OB2 scanner, that will give you the best clue, then clean and check your wheel sensors especially on the front axle. Then have the abs module checked. Most likely it is the wheel sensors, If you have a lot of brake wear they could be dirty or miss gapped, I would start there

Jan 10, 2015 | 2003 GMC Envoy

1 Answer

2003 gmc envoy rear lights won't turn off


As for the brake lights i would think that the brake light switch is faulty.As for the parking lights i think that the parking light relay is sticking.Switch the relay with another one in the fuse panel with the same part number to see if thats the problem or not.

Jun 05, 2012 | 2003 GMC Envoy

1 Answer

Why would my emergency brake not hold? I have installed new drums, dealer replaced cable three yrs ago and has not been tight since. I have gone back several times, and had adjustments, what else can be...


Make sure you have lots of "meat" on your brake shoes.
Emergency brakes only apply rear brakes by using shoes against the drum, that are pulled by the cable, that's attached to the emergency brake lever / pedal....and actuated by the driver.

It has to be one of those three components...may have to pull the drum and actuate the pedal / lever to see if the cable spreads the shoes and make adjustments from there.

If your back brakes don't hold...it can also cause the ABS light to illuminate...

Hope this helps...

Aug 27, 2011 | 2003 GMC Envoy

1 Answer

2003 GMC Envoy have no brake lights, only the top light on the gate works, can you help thanks


First and easiest we need to check for power going to the rear lights at the plug that goes into the tail light housing. There is a board that the lights plug into that goes bad. The Envoy uses separate brake and turn bulbs so the 3rd brake and the two side are on the same circuit.

Feb 15, 2011 | 2003 GMC Envoy

1 Answer

I have a 2003 gmc envoy 4wd I have codes co237, co236 my abs light is on what does this mean


Codes indicate rear wheel speed sensor fault, this part of ABS system. A mechanic will need to inspect sensors.

Jul 07, 2010 | 2003 GMC Envoy

1 Answer

All at once? 2003 GMC Envoy XL


have the car scanned for trouble codes and get back to me with the codes. most major parts stores will do this for little or no charge,get back to me with the codes

May 15, 2009 | 2003 GMC Envoy Xl

1 Answer

Can bleed brakes in 2003 envoy


you ned a scan tool capable of doing aa ABS brake bleed

May 15, 2009 | 2002 GMC Envoy

Not finding what you are looking for?
2003 GMC Envoy Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...