Question about 1986 Ford F150 SuperCab

2 Answers

Cant get fly wheel off . Droped trans & have fly wheel exposed...6 bolts, And they wont come off.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Ford Expert
  • 267 Answers

Put a hammer handle throw a hole in the fly wheel then use a 6 point socket and a long power bar and use even pressure make sure you hold socket on the bolt

Posted on Mar 27, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Soak in penetrating oil and remove bolts using air line. If no access to air tools then use breaker bar with constant pressure (no not bounce)

If no joy then you wheel need to heat the flywheel - if you have to do this replace the rear main seal aswel.

Regards

Lloyd Six

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fly wheel torque specs


3.9L V6 5.2L & 5.9L V8's

flywheel bolts 55 ft lbs.

5.9L ( 24 valve ) 6-cylinder diesel

flywheel bolts 101 ft lbs.

8.0L V10

flywheeel bolts 55 ft lbs.

May 28, 2011 | 2005 Dodge Ram 3500

1 Answer

How can I get to my fly wheel without taking my motor out? And how do I tightin up the fly wheel??


It is a flex plate (automatic) and you can tighten bolts by removing the trans, not easy to do since it is a front wheel driver

Apr 17, 2011 | 1997 Oldsmobile Aurora

1 Answer

Im replacing timing belt on 92 camry 30 v6 w/auto trans. i cannot breakloose he crankshaft balancer/pulley bolt. Are the threads lefthanded?is there any easy way to loosen this bolt without the crankshaft...


the fly wheel access is right there at the starter. it is a little piece of metal.remove it to gain access to the fly wheel or get someone to hold the crank pulley.you will also need a wheel pulley to remove the crank pulley

Jun 27, 2010 | 1991 Toyota Camry

1 Answer

Cant get fly wheel bolts off \r\n2001 eclipes


I'd spray spray down with a good penetrating oil, let set for 24 hours or so, then using a hammer hit the bolt on the head (carefull of the fly wheel) then you may want to actually try to ever-so slightly tighten the bolts then go back and try to remove.

I hope this may have assisted,
Tom

Jun 05, 2010 | 2001 Mitsubishi Eclipse

1 Answer

I have a '94 Explorer auto trans, 100000 miles. I am replacing the transmission for the 4th time. They fly wheel would turn to get the torque converter out of the old one. Will turn with no trans in, but...


Make sure the torque converter is in all the way' with transmission out turn convert clockwies as you push converter in, need to be in all the way or went you bolt transmission to engine the converter will smach on fly wheel and you wont be able to turn fly wheel to bolt to converter. good luck.

May 14, 2010 | 1994 Ford Explorer Limited

1 Answer

I am removing a 3.9 engine on a lincoln ls 2000 away from the transmission. all the transmission bolts are out and the tork converter nuts away from the fly wheel why wont it come apart. are there dowel...


The engine should be separated from the trans at least 1 "and the torqu convert slid into the trans. There may be a dowel pin on each side. That is wh the one inc.

Nov 08, 2009 | 2000 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...