Question about 1980 Chevrolet Corvette

1 Answer

I have no rear stop lights, turn signals or hazards. Parking or tail lights work, as do front turn signals and hazards. Bulbs & fuses are good. ????

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Check your wire harness in the trunk. May have to be replaced. May just be a bad connection. Hope its the latter

Posted on Apr 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal hazard lights work but not running lights


The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

No tail signal hazard and stop lights


After checking for power at the fuses for these circuits, I would check for power at the multi-function switch. Everything but the parking lights is wired thru that turn signal switch.

Sep 14, 2012 | Hyundai Tiburon Cars & Trucks

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.


Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

1 Answer

2001 F-250 SUPER DUTY TAIL LIGHTS WIRING DIAGRAM


THE TAIL/MARKER LIGHTS, GO FROM THE HEADLIGHT SWITCH TO THE REAR FOR THE TAIL LIGHTS & TO THE FRONT FOR PARKING OR RUNNING LIGHTS. ALL THOSE LIGHTS ARE ON THE SAME CIRCUIT, { BROWN WIRE } THE BRAKE & TURN SIGNAL WIRES GO FROM THE STOP LIGHT SWITCH & FROM THE TURN SIGNAL/HAZARD SWITCH. NO RELAY IN THE TAIL/PARK CIRCUIT. CHECK THE FUSES WITH A GOOD FUSE TESTER.

Jan 15, 2011 | 2001 Ford F250 Super Duty Super Cab

1 Answer

My 2003 Pontiac Vibe tail lights do not work. The brake lights work. I checked the tail fuse. Turn signals work also. Why no tail lights?


Your turn signal lights and brake lights are the same lights . Question : do the front parking lights work ? The front and rear running lights or parking lights are all on the same circuit and fuse . If the front lights work , and the rear lights don't , make sure the bulbs are good first . If OK , I would suspect the problem is either a bad ground in the rear taillight wiring harness or a bad connection in the rear taillight connector Itself .

Sep 16, 2010 | 2003 Pontiac Vibe

1 Answer

Tail lights stopped working (keeps blowing fuse)


you could either have a front marker/signal lamp w/lamp grounded and causing this,remember...when tail lights are on so are your frt parking/marker lights on also..... other than that you could have a feed wire worn thru and grounding out to the frame

Sep 13, 2009 | 1994 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...