Question about 1999 BMW 323 Series

1 Answer

How do you change front right directional light?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The front corner light adjacent to the headlamp is held in place with a clip which is plastic and is part of the corner light.

With the hood up, look down between the headlight and the side/corner light and there ill be a white plastic tab/clip with a barb on the end of it extending back a little.

Flex the tab away slightly with a long screwdriver or similar and at the same time pushing the corner light forward and out.

To re-fit, the corner light slides back into place with the help of the slide in guides beside the head light.... as you push it back you will hear it snap/clip back into place.

Posted on Apr 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My side marker lights in the front only come on i use my directional , but it dont blink. wont work in head light position


Check power 12vdc at the bulb socket. If no power when parking lights are on check power at the connection behind the socket. If no power check at the fuse box right after the fuse

Mar 01, 2015 | 1993 Lincoln Town Car

1 Answer

Have a 99 Toyota camry n brake light is on after changing right front brake caliper


Master cylinder fluid piston has entered into a brake safe mode.
when the high pressure brake system is opened in any way, the brake master cylinder piston reaches to the far end of the master cylinder which trips the brake system warning light.

This brake light condition is due to sudden loss of brake fluid pressure on the right front brake caliper assembly during the replacement.

Left rear brake caliper bleed valve will ned to be "opened" until master cylinder piston travels into the opposite direction which "resets" the brake system warning light.

Dot 4 brake fluid recommened for most, but not all vehicles.
Reference vehicle to owners manual for replacement fluid is replaced under master cylinder brake system cap.

Aug 18, 2013 | 1993 Buick Park Avenue

1 Answer

Directions installing marker light bulb 06 toyota avalon


napa,auto zone has those directions also the parts dept at your dealer and the owners book has those in the rear of your book

Aug 21, 2012 | 2006 Toyota Avalon Limited

1 Answer

2006 Cadillac SRX- how to replace front directional light bulbs without dismantalling the whole front bumper cover?


Just remove the air filter housing and the inner right fender plastic pins enough to flex it out of the way...... then you can remove the six torx screws and remove the bulb cover........change the bulb.
spray a little WD40 in the bulb socket first.

Feb 20, 2011 | Cadillac SRX Cars & Trucks

3 Answers

Yes i have a 96 chevy lumina i changed the plugs and i think i may have switch the wires but dont know where they go directly


From standing in front of car and facing engine:

3.1L and 3.4L OHV V-6: The cylinder location is from left to right (rear cylinders) 1,3,5
(front cylinders)2,4,6

The coil terminals from left to right: 5,2,3,6,4,1
Firing order 1,2,3,4,5,6

3.4L DOHC V-6: The cylinder location is from left to right (rear) 1,3,5 (front) 2,4,6
The coil terminals are from front to rear 5,2,3,6,4,1
The firing order 1,2,3,4,5,6

3.8L V-6 cylinders left to right (rear)2,4,6 (front) 1,3,5
coil terminals front to rear 1,4,5,2,3,6
firing order 1,6,5,4,3,2

Feb 08, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

How to change front driver side turn signal bulb in a 98 Lexus es 300.


This may be right.I got this third hand.. works on later models. Above the area of the turn signal there will be a piece of black plastic that extends from the left side of the front of the car to the right. In this case if its the driver side pull up the plastic tab holding down the plastic strip in front of the battery directly above the headlight and lift it up. This will expose a screw that retains the front signal/driving light housing. Remove screw and carefully slide housing forward. Once out remove bulb and replace. This should only take 5 minutes, works on either side

Apr 07, 2010 | 1998 Lexus ES 300

1 Answer

Turn signals blinking fast and stop when brakes applied


likely not, but change /check anyhow....If problem persists, likely you will need to change the module that controls directionals (usually under dash to the right of steering column)

Apr 26, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
1999 BMW 323 Series Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...