Question about 2006 Mercedes-Benz ML-Class
It will come on sometimes while driving in certain conditions, like a rough or loose road surface. It's indicating that the stability and antilock brake systems etc are in operation while those road conditions exist.
It will go out when normal road conditions are detected.
Posted on Apr 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Warning Light on Mercedes ML270
To my understanding:
BAS ESP - Electronic Stability Program (keeps you moving in the direction you intended the vehicle to go); probably a faulty brake switch or a bad brake sensor. You may want to reference this forum for additional insights;
ETS - Electronic Traction System (keeps you moving); would require an appropriate code reader to diagnose and pinpoint problem.Surprisingly, there has been some reports of defective brake pedal switch that activates this warning. You may lilkewise want to reference this forum for additional insights.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Jun 06, 2008
you need to see what the eng lite for if there is a trans codes usually the pcm wont let the speed go over 40 stays in safe mode untill you fix the problem or change the sensor,for the esp you need to chage the esp sensor and recalibrate by the dealer
Posted on Jul 21, 2009
SOURCE: my light says esp-bas. what
The system has detected a fault in the electronic stability program - brake assit system. You have an electrical connection at the rear wheels secured to the inside of the brake area and are viewable from under the vehicle. It is a small wire harness running to each wheel. Grab the connector and wiggle it around, and make sure they are tight. Due to the connector being mounted low to the ground, sometimes they become dirty or corroded, not making contact. Do this on both sides and see if the lights turn off.
Posted on Oct 15, 2010
Tips for a great answer:
Apr 11, 2016 | Dodge Cars & Trucks
Nov 28, 2015 | Cars & Trucks
May 11, 2015 | 2010 Dodge Journey
May 29, 2014 | Cars & Trucks
Jan 05, 2014 | 2005 Chrysler 300
Dec 21, 2012 | 2010 Dodge Journey 2.4
Sep 19, 2011 | 2006 Jeep Commander
Jan 13, 2010 | 2005 Dodge Magnum
430 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: