2001 Chrysler Concorde Logo

Related Topics:

Posted on Apr 30, 2010

Passenger side Power windows only work below 45 degrees

What would cause the power windows on the passenger side of a Chrysler concorde not to work above 45 degrees?

1 Answer

A

Anonymous

Nothing to do with temp

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the tcm located on a 96 Chrysler Concorde

TCM Transmission Control Module, passenger side, upper bay area, just befor strut, attached to frame rail,
PDC Power Distribution Center is on opposite corner, along with PCM Power-Train Control Module
ECM Engine Control Module is on driver side about midway of engine compartment attached to frame rail.


4a2cf9b-wpfsb3viqmjpnlor3p3j4z2t-5-0.png The other modules are just for reference.
0helpful
1answer

Where is the fuel filter located on a 1996 chrysler concorde?

Here is the location:
Under vehicle, passenger side, below seating area, front of rear wheelwell, mounted on frame rail in fuel line
1helpful
1answer

Passenger power window went down by power, it will not go up. no noise, lights do not dim.looking for the relay or fuse. I used the driver and passenger switches. all other windows work. It has been very...

ok if the others work then it is not a fuse or relay. A comon problem with them is the window track guides wear out and the window will jump track or just stick. You will have to take the door panel off to see this. If the window is in the track but leaning then it is the guides you can buy them at auto zone and are not bad to change once you have the door apart.
1helpful
1answer

2005 Chrysler T&C passenger side window went down and won't come up. All other automatic windows and door locks work fine - don't hear any motor sound / buzz / etc. when either driver side or passenger...

If the window had not been slow in it's action before it stopped working I'm guessing you only have a connection problem. I would remove the door panel and using a multimeter check the hot wire to see if power is reaching the switch. If it is check the connection on the motor. If power is reaching the motor through the switch you have a faulty motor. If at any point of testing there is no power backtrack the power wire to find where the break is. (it's usually in the door jam)
0helpful
1answer

The windows don't work right

If the passenger front window switch operates up & down correctly the left drivers side switch is bad and needs a replacement switch
1helpful
1answer
2helpful
1answer

2000 chrysler concorde switch unlocks but wont lock doors.

sounds like the actuator. I had the same problem. Mine got to the point where it will now only work with the key. Had it looked at by dealer.. actuator is bad. Good luck.
4helpful
1answer

Driver's side power window doesn't work

2006 chrysler town and country passenger side window suddenly stopped working.
other windows work, sliding doors work as does rear hatchback.
fuses seem to be good.
might there be a safety switch that somehow got pushed that keeps the passenger window from opening?
0helpful
1answer

Failure h/a controls and power windows

you might want to try a body control module on most LH models it is located behind the lower dash on the passenger side of car.
Not finding what you are looking for?

122 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...