Question about 2004 Dodge Stratus

1 Answer

When I press the break only my passanger side tail light works. Is this a fuse problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Dodge Master
  • 3,854 Answers

Try replacing the passenger side tail light bulb.
Inside trunk, remove two black plastic nuts holding carpet liner in place on side where bulb is burnt out.
Pull back carpet, use a flat screwdriver to pop out the wiring. Remove three nuts using a small open-ended socket or pliers.
Pop out entire tail light assembly. Locate bulb to be replaced. Rotate 1/4 turn to remove from socket. Replace bulb and repeat in reverse order to reinstall.
Thank you for using fixya and good luck

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tali light out break light works


Check your fuses and bulbs, just because the brake lights work does not mean your tail lights do, $15 you can replace them all at auto zone

Apr 18, 2014 | 2001 Dodge Ram 2500 Truck

2 Answers

Dash and tail lights not workjng brake and turn signal on passanger side not working


The dash and tail lights are on two different circuits, and the brake and turn signals are on different circuits, so at least 4 circuits total.
I would start at the headlight switch and check for power on the first two issues.

Jan 18, 2014 | 1990 Buick Century

1 Answer

No taillights park or dash lights


check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk

Jan 15, 2014 | 1990 Buick Century

1 Answer

2007 Kia Rio. Passanger side taillight doesnt work. Socket tested and is good. No power to just the taillight for some reason. Whats the problem?


I would trace the wiring from the tail light to the fuse box make sure there are no breaks in the wiring it could have cut cut somehow.

Oct 05, 2013 | Cars & Trucks

1 Answer

My passanger side break light will not work......


The light bulb has 2 operations, brake and tail lights. Go to Advance and they will replace it for you.

Feb 18, 2013 | 1999 Chevrolet Malibu

1 Answer

1999 chevy malibu break light not working


Check the wiring itself. Could have a nick in it of loose from the socket itself.

Jan 23, 2013 | 1999 Chevrolet Malibu

1 Answer

Tail light and the tag light will not work


Sounds like a problem in the wiring harness.

Jan 10, 2013 | 2002 Chevrolet TrailBlazer

1 Answer

None of my tail lights work. i changed the bulbs, tail light control board and fuses. I'm an electrician so i need a wire diagram of a 1996 chevy suburban


Your solution is a new combination switch,It also sounds like the hazard are activated and is non operation interfering with the brake light,but either way the solution is a combination swith

Jul 08, 2012 | 1996 Chevrolet Suburban

1 Answer

Hell i just bought a chevy cavlier and my back break light is out...the light its self is on...its just the break light when pressed...


you don`t say if its both or just one brake light out.you say the light itself is on but not if you mean tail light or what.the tail lights use a different filament in the bulb than the signal light which is the same filament that the brake light uses.if the signal light work on the rear then the bulbs are good,if just one side works then the bulb is no good on the side that doesn`t work.if the signal lights work but neither brake light works then you need to check the fuses in the fuse panel under the dash on the drivers side.if the fuses are good then it will be either a bad wire at the brake switch or a bad brake light switch,this is located on the brake pedal lever under the dash.

Mar 18, 2011 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
2004 Dodge Stratus Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...